Stress in wire due to fluid pressure given resisting force on wire Calculator

✖Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Force [F]			+10% -10%
✖The number of turns of wire is the number of turns of wire over the thin cylinder.ⓘ Number of turns of wire [N]			+10% -10%
✖Cross-Sectional Area Wire is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area Wire [A_cs]			+10% -10%

✖Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.ⓘ Stress in wire due to fluid pressure given resisting force on wire [σ_wf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Stress in wire due to fluid pressure given resisting force on wire Solution

STEP 0: Pre-Calculation Summary

Formula Used

Stress in wire due to fluid pressure = Force/(Number of turns of wire*(2*Cross-Sectional Area Wire))
σ_wf = F/(N*(2*A_cs))
This formula uses 4 Variables

Variables Used

Stress in wire due to fluid pressure - (Measured in Pascal) - Stress in wire due to fluid pressure is a kind of tensile stress exerted on wire due to fluid pressure.
Force - (Measured in Newton) - Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Number of turns of wire - The number of turns of wire is the number of turns of wire over the thin cylinder.
Cross-Sectional Area Wire - (Measured in Square Meter) - Cross-Sectional Area Wire is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

STEP 1: Convert Input(s) to Base Unit

Force: 1.2 Kilonewton --> 1200 Newton (Check conversion here)
Number of turns of wire: 100 --> No Conversion Required
Cross-Sectional Area Wire: 400 Square Millimeter --> 0.0004 Square Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_wf = F/(N*(2*A_cs)) --> 1200/(100*(2*0.0004))

Evaluating ... ...

σ_wf = 15000

STEP 3: Convert Result to Output's Unit

15000 Pascal -->0.015 Megapascal (Check conversion here)

FINAL ANSWER

0.015 Megapascal <-- Stress in wire due to fluid pressure

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Thin Cylinders And Spheres » Wire Winding of Thin Cylinders » Mechanical » Stress » Stress in wire due to fluid pressure given resisting force on wire

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Stress Calculators

Circumferential stress in cylinder due to fluid given bursting force due to fluid pressure

LaTeX Go Circumferential Stress due to Fluid Pressure = ((Force/Length of wire)-((pi/2)*Diameter of Wire*Stress in wire due to fluid pressure))/(2*Thickness Of Wire)

Circumferential stress in cylinder given circumferential strain in cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = (Circumferential Strain*Young's Modulus Cylinder)+(Poisson's Ratio*Longitudinal Stress)

Circumferential stress due to fluid pressure given resisting force of cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = Force/(2*Length of wire*Thickness Of Wire)

Circumferential stress due to fluid pressure given resultant stress in cylinder

LaTeX Go Circumferential Stress due to Fluid Pressure = Resultant Stress+Compressive Circumferential Stress

< Stress Calculators

Internal diameter of vessel given hoop stress and efficiency of longitudinal joint

LaTeX Go Inner Diameter of Cylinderical Vessel = (Hoop Stress in Thin shell*2*Thickness Of Thin Shell*Efficiency of Longitudinal Joint)/(Internal Pressure in thin shell)

Longitudinal stress in thin cylindrical vessel given Longitudinal strain

LaTeX Go Longitudinal Stress Thick Shell = ((Longitudinal Strain*Modulus of Elasticity Of Thin Shell))+(Poisson's Ratio*Hoop Stress in Thin shell)

Efficiency of circumferential joint given longitudinal stress

LaTeX Go Efficiency of Circumferential Joint = (Internal Pressure in thin shell*Inner Diameter of Cylinderical Vessel)/(4*Thickness Of Thin Shell)

Efficiency of longitudinal joint given hoop stress

LaTeX Go Efficiency of Longitudinal Joint = (Internal Pressure in thin shell*Inner Diameter of Cylinderical Vessel)/(2*Thickness Of Thin Shell)

Stress in wire due to fluid pressure given resisting force on wire Formula

LaTeX Go

Stress in wire due to fluid pressure = Force/(Number of turns of wire*(2*Cross-Sectional Area Wire))
σ_wf = F/(N*(2*A_cs))

Is a higher Young's modulus better?

The coefficient of proportionality is Young's modulus. The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material such as fluid would deform without force and would have zero Young's Modulus.

How to Calculate Stress in wire due to fluid pressure given resisting force on wire?

Stress in wire due to fluid pressure given resisting force on wire calculator uses Stress in wire due to fluid pressure = Force/(Number of turns of wire*(2*Cross-Sectional Area Wire)) to calculate the Stress in wire due to fluid pressure, Stress in wire due to fluid pressure given resisting force on wire is the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body. Stress in wire due to fluid pressure is denoted by σ_wf symbol.

How to calculate Stress in wire due to fluid pressure given resisting force on wire using this online calculator? To use this online calculator for Stress in wire due to fluid pressure given resisting force on wire, enter Force (F), Number of turns of wire (N) & Cross-Sectional Area Wire (A_cs) and hit the calculate button. Here is how the Stress in wire due to fluid pressure given resisting force on wire calculation can be explained with given input values -> 1.5E-8 = 1200/(100*(2*0.0004)).

FAQ

What is Stress in wire due to fluid pressure given resisting force on wire?

Stress in wire due to fluid pressure given resisting force on wire is the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body and is represented as σ_wf = F/(N*(2*A_cs)) or Stress in wire due to fluid pressure = Force/(Number of turns of wire*(2*Cross-Sectional Area Wire)). Force is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity, The number of turns of wire is the number of turns of wire over the thin cylinder & Cross-Sectional Area Wire is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

How to calculate Stress in wire due to fluid pressure given resisting force on wire?

Stress in wire due to fluid pressure given resisting force on wire is the force acting on the unit area of a material. The effect of stress on a body is named as strain. Stress can deform the body is calculated using Stress in wire due to fluid pressure = Force/(Number of turns of wire*(2*Cross-Sectional Area Wire)). To calculate Stress in wire due to fluid pressure given resisting force on wire, you need Force (F), Number of turns of wire (N) & Cross-Sectional Area Wire (A_cs). With our tool, you need to enter the respective value for Force, Number of turns of wire & Cross-Sectional Area Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Stress in wire due to fluid pressure?

In this formula, Stress in wire due to fluid pressure uses Force, Number of turns of wire & Cross-Sectional Area Wire. We can use 3 other way(s) to calculate the same, which is/are as follows -

Stress in wire due to fluid pressure = Resultant Stress-Initial Winding Stress
Stress in wire due to fluid pressure = Young's Modulus Cylinder*Stress in Component
Stress in wire due to fluid pressure = (2*Force)/(Length of wire*pi*Diameter of Wire)

Home

FREE PDFs

🔍 Search