Stress in Transverse Reinforcement given End Zone Reinforcement Calculator

✖The Prestress Bursting force represents the resultant of the tensile stress in a transverse direction.ⓘ Prestress Bursting force [F_bst]			+10% -10%
✖End Zone Reinforcement can be defined as the reinforcement which restrict the splitting of concrete, in addition to shear reinforcement, provided at each ends of member.ⓘ End Zone Reinforcement [A_st]			+10% -10%

✖Stress in Transverse Reinforcement can be represented as the stress induced in the steel which are aligned in transverse direction or perpendicular direction to the axis.ⓘ Stress in Transverse Reinforcement given End Zone Reinforcement [f_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission of Prestress Formulas PDF PDF Image

Stress in Transverse Reinforcement given End Zone Reinforcement Solution

STEP 0: Pre-Calculation Summary

Formula Used

Stress in Transverse Reinforcement = Prestress Bursting force/End Zone Reinforcement
f_s = F_bst/A_st
This formula uses 3 Variables

Variables Used

Stress in Transverse Reinforcement - (Measured in Newton per Square Millimeter) - Stress in Transverse Reinforcement can be represented as the stress induced in the steel which are aligned in transverse direction or perpendicular direction to the axis.
Prestress Bursting force - (Measured in Kilonewton) - The Prestress Bursting force represents the resultant of the tensile stress in a transverse direction.
End Zone Reinforcement - (Measured in Square Meter) - End Zone Reinforcement can be defined as the reinforcement which restrict the splitting of concrete, in addition to shear reinforcement, provided at each ends of member.

STEP 1: Convert Input(s) to Base Unit

Prestress Bursting force: 68 Kilonewton --> 68 Kilonewton No Conversion Required
End Zone Reinforcement: 0.272 Square Meter --> 0.272 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_s = F_bst/A_st --> 68/0.272

Evaluating ... ...

f_s = 250

STEP 3: Convert Result to Output's Unit

250000000 Pascal -->250 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

250 Newton per Square Millimeter <-- Stress in Transverse Reinforcement

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Prestressed Concrete » Transmission of Prestress » Post Tensioned Members » Stress in Transverse Reinforcement given End Zone Reinforcement

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Post Tensioned Members Calculators

Prestress in Tendon given Bursting Force for Square End Zone

LaTeX Go Prestressing Force = Prestress Bursting force/(0.32-0.3*(Side Length of Bearing Plate/Traverse Dimension of End Zone))

Bursting Force for Square End Zone

LaTeX Go Prestress Bursting force = Prestressing Force*(0.32-0.3*(Side Length of Bearing Plate/Traverse Dimension of End Zone))

End Zone Reinforcement along Transmission Length

LaTeX Go End Zone Reinforcement = (2.5*Moment in Structures)/(Allowable Stress*Total Depth)

Allowable Stress given End Zone Reinforcement

LaTeX Go Allowable Stress = (2.5*Moment in Structures)/(End Zone Reinforcement*Total Depth)

Stress in Transverse Reinforcement given End Zone Reinforcement Formula

LaTeX Go

Stress in Transverse Reinforcement = Prestress Bursting force/End Zone Reinforcement
f_s = F_bst/A_st

What is meant by Bursting Force?

Bursting force is the capacity of a reinforcement in the section or substance to resist change when under pressure. Bursting force is the capacity of a reinforcement in the section or substance to resist change when under pressure. A large bearing stress is generated in the axial direction of the concrete member around the bearing plate and a tensile stress is generated in the vertical direction of the tendons. This tensile stress is called a bursting force. The bursting force should be resisted by properly designed reinforcement.

What does End Zone Reinforcement mean?

The End Zone Reinforcement in each Direction(Ast) is transverse reinforcement is provided in each principle direction based on the value of bursting force. To restrict the splitting of concrete, transverse reinforcement (in addition to the reinforcement for shear) needs to be provided at each end of a member along the transmission length. This reinforcement is known as end zone reinforcement.

How to Calculate Stress in Transverse Reinforcement given End Zone Reinforcement?

Stress in Transverse Reinforcement given End Zone Reinforcement calculator uses Stress in Transverse Reinforcement = Prestress Bursting force/End Zone Reinforcement to calculate the Stress in Transverse Reinforcement, The Stress in Transverse Reinforcement given End Zone Reinforcement formula is defined as the stress that can be safely applied to structure transversely. Stress in Transverse Reinforcement is denoted by f_s symbol.

How to calculate Stress in Transverse Reinforcement given End Zone Reinforcement using this online calculator? To use this online calculator for Stress in Transverse Reinforcement given End Zone Reinforcement, enter Prestress Bursting force (F_bst) & End Zone Reinforcement (A_st) and hit the calculate button. Here is how the Stress in Transverse Reinforcement given End Zone Reinforcement calculation can be explained with given input values -> 0.000922 = 68000/0.272.

FAQ

What is Stress in Transverse Reinforcement given End Zone Reinforcement?

The Stress in Transverse Reinforcement given End Zone Reinforcement formula is defined as the stress that can be safely applied to structure transversely and is represented as f_s = F_bst/A_st or Stress in Transverse Reinforcement = Prestress Bursting force/End Zone Reinforcement. The Prestress Bursting force represents the resultant of the tensile stress in a transverse direction & End Zone Reinforcement can be defined as the reinforcement which restrict the splitting of concrete, in addition to shear reinforcement, provided at each ends of member.

How to calculate Stress in Transverse Reinforcement given End Zone Reinforcement?

The Stress in Transverse Reinforcement given End Zone Reinforcement formula is defined as the stress that can be safely applied to structure transversely is calculated using Stress in Transverse Reinforcement = Prestress Bursting force/End Zone Reinforcement. To calculate Stress in Transverse Reinforcement given End Zone Reinforcement, you need Prestress Bursting force (F_bst) & End Zone Reinforcement (A_st). With our tool, you need to enter the respective value for Prestress Bursting force & End Zone Reinforcement and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search