Stress Calculated in Crack Control Solution

STEP 0: Pre-Calculation Summary
Formula Used
Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3
fs = z/(dc*A)^1/3
This formula uses 4 Variables
Variables Used
Stress in Reinforcement - (Measured in Pascal) - Stress in Reinforcement can be defined as the force applied along an the reinforcement upon a cross sectional area of reinforcement.
Crack Control Limits - (Measured in Newton per Meter) - Crack Control Limits can be described when reinforcement is subjected to high stresses so that there is control limits for cracks.
Thickness of Concrete Cover - (Measured in Meter) - Thickness of Concrete Cover can be described as the length of concrete cover measured from extreme tension surface to center of bar closest to that surface.
Effective Tension Area of Concrete - (Measured in Square Meter) - Effective Tension Area of Concrete can be described as the area surrounding main tension reinforcement.
STEP 1: Convert Input(s) to Base Unit
Crack Control Limits: 900 Pound-Force per Inch --> 157614.151720995 Newton per Meter (Check conversion ​here)
Thickness of Concrete Cover: 1000.3 Inch --> 25.4076200001016 Meter (Check conversion ​here)
Effective Tension Area of Concrete: 1000.2 Square Inch --> 0.645289032005162 Square Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
fs = z/(dc*A)^1/3 --> 157614.151720995/(25.4076200001016*0.645289032005162)^1/3
Evaluating ... ...
fs = 3204.46612807296
STEP 3: Convert Result to Output's Unit
3204.46612807296 Pascal -->3.20446612807296 Kilonewton per Square Meter (Check conversion ​here)
FINAL ANSWER
3.20446612807296 3.204466 Kilonewton per Square Meter <-- Stress in Reinforcement
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

Crack Control of Flexural Members Calculators

Equation for Crack Control Specific Limits
​ LaTeX ​ Go Crack Control Limits = Stress in Reinforcement*(Thickness of Concrete Cover*Effective Tension Area of Concrete)^(1/3)
Stress Calculated in Crack Control
​ LaTeX ​ Go Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3

Stress Calculated in Crack Control Formula

​LaTeX ​Go
Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3
fs = z/(dc*A)^1/3

How to Calculate Stress in Crack Control?

Stress in crack control can be calculated by service loads acting upon the area of the reinforcement.

How to Calculate Stress Calculated in Crack Control?

Stress Calculated in Crack Control calculator uses Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3 to calculate the Stress in Reinforcement, The Stress Calculated in Crack Control is defined as the stress induced when service loads are acting on the reinforcement. Stress in Reinforcement is denoted by fs symbol.

How to calculate Stress Calculated in Crack Control using this online calculator? To use this online calculator for Stress Calculated in Crack Control, enter Crack Control Limits (z), Thickness of Concrete Cover (dc) & Effective Tension Area of Concrete (A) and hit the calculate button. Here is how the Stress Calculated in Crack Control calculation can be explained with given input values -> 0.003561 = 157614.151720995/(25.4076200001016*0.645289032005162)^1/3.

FAQ

What is Stress Calculated in Crack Control?
The Stress Calculated in Crack Control is defined as the stress induced when service loads are acting on the reinforcement and is represented as fs = z/(dc*A)^1/3 or Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3. Crack Control Limits can be described when reinforcement is subjected to high stresses so that there is control limits for cracks, Thickness of Concrete Cover can be described as the length of concrete cover measured from extreme tension surface to center of bar closest to that surface & Effective Tension Area of Concrete can be described as the area surrounding main tension reinforcement.
How to calculate Stress Calculated in Crack Control?
The Stress Calculated in Crack Control is defined as the stress induced when service loads are acting on the reinforcement is calculated using Stress in Reinforcement = Crack Control Limits/(Thickness of Concrete Cover*Effective Tension Area of Concrete)^1/3. To calculate Stress Calculated in Crack Control, you need Crack Control Limits (z), Thickness of Concrete Cover (dc) & Effective Tension Area of Concrete (A). With our tool, you need to enter the respective value for Crack Control Limits, Thickness of Concrete Cover & Effective Tension Area of Concrete and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!