Strength of Joint per Pitch Length using Lap Joint with Single Shear Calculator

✖Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.ⓘ Number of Rivets Per Pitch [n]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖Safe shear stress is always less than the yield shear stress.ⓘ Safe Shear Stress [T_safe]			+10% -10%

✖Strength of joint is the strength of riveted joint per pitch length.ⓘ Strength of Joint per Pitch Length using Lap Joint with Single Shear [S]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Strength of Joint per Pitch Length using Lap Joint with Single Shear Solution

STEP 0: Pre-Calculation Summary

Formula Used

Strength of Joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
S = n*(1*(pi/4)*(D_rivet^2)*T_safe)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Strength of Joint - (Measured in Newton) - Strength of joint is the strength of riveted joint per pitch length.
Number of Rivets Per Pitch - Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.

STEP 1: Convert Input(s) to Base Unit

Number of Rivets Per Pitch: 2 --> No Conversion Required
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Safe Shear Stress: 0.24 Megapascal --> 240000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S = n*(1*(pi/4)*(D_rivet^2)*T_safe) --> 2*(1*(pi/4)*(0.018^2)*240000)

Evaluating ... ...

S = 122.145122371571

STEP 3: Convert Result to Output's Unit

122.145122371571 Newton -->0.122145122371571 Kilonewton (Check conversion here)

FINAL ANSWER

0.122145122371571 ≈ 0.122145 Kilonewton <-- Strength of Joint

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Shearing of Rivet » Strength of Joint per Pitch Length using Lap Joint with Single Shear

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))

Diameter of rivet given safe load per pitch length in double rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))

Safe Load per Pitch Length using Single Rivet Lap Joint

LaTeX Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Lap Joint

LaTeX Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Strength of Joint per Pitch Length using Lap Joint with Single Shear Formula

LaTeX Go

Strength of Joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
S = n*(1*(pi/4)*(D_rivet^2)*T_safe)

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Strength of Joint per Pitch Length using Lap Joint with Single Shear?

Strength of Joint per Pitch Length using Lap Joint with Single Shear calculator uses Strength of Joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress) to calculate the Strength of Joint, The Strength of Joint per Pitch Length using Lap Joint with Single Shear formula is defined as the strength of riveted joint per pitch length of the rivet. Strength of Joint is denoted by S symbol.

How to calculate Strength of Joint per Pitch Length using Lap Joint with Single Shear using this online calculator? To use this online calculator for Strength of Joint per Pitch Length using Lap Joint with Single Shear, enter Number of Rivets Per Pitch (n), Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe) and hit the calculate button. Here is how the Strength of Joint per Pitch Length using Lap Joint with Single Shear calculation can be explained with given input values -> 0.000217 = 2*(1*(pi/4)*(0.018^2)*240000).

FAQ

What is Strength of Joint per Pitch Length using Lap Joint with Single Shear?

The Strength of Joint per Pitch Length using Lap Joint with Single Shear formula is defined as the strength of riveted joint per pitch length of the rivet and is represented as S = n*(1*(pi/4)*(D_rivet^2)*T_safe) or Strength of Joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). Number of Rivets Per Pitch is defined as total number of rivets that are present on the pitch of the rivet, Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & Safe shear stress is always less than the yield shear stress.

How to calculate Strength of Joint per Pitch Length using Lap Joint with Single Shear?

The Strength of Joint per Pitch Length using Lap Joint with Single Shear formula is defined as the strength of riveted joint per pitch length of the rivet is calculated using Strength of Joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). To calculate Strength of Joint per Pitch Length using Lap Joint with Single Shear, you need Number of Rivets Per Pitch (n), Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe). With our tool, you need to enter the respective value for Number of Rivets Per Pitch, Rivet Diameter & Safe Shear Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Strength of Joint?

In this formula, Strength of Joint uses Number of Rivets Per Pitch, Rivet Diameter & Safe Shear Stress. We can use 1 other way(s) to calculate the same, which is/are as follows -

Strength of Joint = Number of Rivets Per Pitch*(2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Home

FREE PDFs

🔍 Search