STP Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volume at STP = Volume*(Temperature at STP/Temperature)*(Pressure/Pressure at STP)
VSTP = V*(TSTP/T)*(p/PSTP)
This formula uses 6 Variables
Variables Used
Volume at STP - (Measured in Cubic Meter) - Volume at STP is the volume of the system at standard temperature and pressure.
Volume - (Measured in Cubic Meter) - Volume is the amount of space that a substance or object occupies or that is enclosed within a container.
Temperature at STP - (Measured in Kelvin) - Temperature at STP refers to nominal measure of hotness or coldness in the atmosphere at sea level.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Pressure at STP - (Measured in Pascal) - Pressure at STP is the pressure which refers to nominal conditions in the atmosphere at sea level.
STEP 1: Convert Input(s) to Base Unit
Volume: 0.5 Liter --> 0.0005 Cubic Meter (Check conversion ​here)
Temperature at STP: 273 Kelvin --> 273 Kelvin No Conversion Required
Temperature: 85 Kelvin --> 85 Kelvin No Conversion Required
Pressure: 800 Pascal --> 800 Pascal No Conversion Required
Pressure at STP: 101325 Pascal --> 101325 Pascal No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
VSTP = V*(TSTP/T)*(p/PSTP) --> 0.0005*(273/85)*(800/101325)
Evaluating ... ...
VSTP = 1.26790612618104E-05
STEP 3: Convert Result to Output's Unit
1.26790612618104E-05 Cubic Meter -->0.0126790612618104 Liter (Check conversion ​here)
FINAL ANSWER
0.0126790612618104 0.012679 Liter <-- Volume at STP
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

Pressure of Gas Calculators

Pressure of Gas given Average Velocity and Volume in 2D
​ LaTeX ​ Go Pressure of Gas given AV and V = (Molar Mass*2*((Average Velocity of Gas)^2))/(pi*Volume of Gas for 1D and 2D)
Pressure of Gas given Average Velocity and Volume
​ LaTeX ​ Go Pressure of Gas given AV and V = (Molar Mass*pi*((Average Velocity of Gas)^2))/(8*Volume of Gas for 1D and 2D)
Pressure of Gas given Average Velocity and Density in 2D
​ LaTeX ​ Go Pressure of Gas given AV and D = (Density of Gas*2*((Average Velocity of Gas)^2))/pi
Pressure of Gas given Average Velocity and Density
​ LaTeX ​ Go Pressure of Gas given AV and D = (Density of Gas*pi*((Average Velocity of Gas)^2))/8

STP Formula

​LaTeX ​Go
Volume at STP = Volume*(Temperature at STP/Temperature)*(Pressure/Pressure at STP)
VSTP = V*(TSTP/T)*(p/PSTP)

What is STP?

Standard Temperature and Pressure (STP) is defined as 0 degrees Celsius and 1 atmosphere of pressure. STP is used in many thermodynamic calculations and tabulations. Certain properties of matter such as density, viscosity, boiling point etc. will vary with changes in temperature or pressure. Having one common set of conditions ("state") for tabulating these values makes comparisons possible and eases calculations. STP values are most often cited for gases because their characteristics change dramatically with temperature and pressure.

How to Calculate STP?

STP calculator uses Volume at STP = Volume*(Temperature at STP/Temperature)*(Pressure/Pressure at STP) to calculate the Volume at STP, STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP is most commonly used when performing gas calculations, such as gas density. Volume at STP is denoted by VSTP symbol.

How to calculate STP using this online calculator? To use this online calculator for STP, enter Volume (V), Temperature at STP (TSTP), Temperature (T), Pressure (p) & Pressure at STP (PSTP) and hit the calculate button. Here is how the STP calculation can be explained with given input values -> 12.67906 = 0.0005*(273/85)*(800/101325).

FAQ

What is STP?
STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP is most commonly used when performing gas calculations, such as gas density and is represented as VSTP = V*(TSTP/T)*(p/PSTP) or Volume at STP = Volume*(Temperature at STP/Temperature)*(Pressure/Pressure at STP). Volume is the amount of space that a substance or object occupies or that is enclosed within a container, Temperature at STP refers to nominal measure of hotness or coldness in the atmosphere at sea level, Temperature is the degree or intensity of heat present in a substance or object, Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed & Pressure at STP is the pressure which refers to nominal conditions in the atmosphere at sea level.
How to calculate STP?
STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP is most commonly used when performing gas calculations, such as gas density is calculated using Volume at STP = Volume*(Temperature at STP/Temperature)*(Pressure/Pressure at STP). To calculate STP, you need Volume (V), Temperature at STP (TSTP), Temperature (T), Pressure (p) & Pressure at STP (PSTP). With our tool, you need to enter the respective value for Volume, Temperature at STP, Temperature, Pressure & Pressure at STP and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!