Storage Coefficient given time at which Steady Shape conditions develops Calculator

✖The Transmissivity refers to the measure of how much water can be transmitted horizontally through an aquifer is the product of the hydraulic conductivity of the aquifer and its saturated thickness.ⓘ Transmissivity [τ]			+10% -10%
✖Time at which Steady-Shape Conditions develop at the Outermost Observation Well.ⓘ Time at Which Steady-shape Conditions Develop [t_c]			+10% -10%
✖Distance from Pumping Well to the point where drawdown occurs.ⓘ Distance from Pumping Well [r]			+10% -10%

✖Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.ⓘ Storage Coefficient given time at which Steady Shape conditions develops [S]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Groundwater Hydrology Formula PDF PDF Image

Storage Coefficient given time at which Steady Shape conditions develops Solution

STEP 0: Pre-Calculation Summary

Formula Used

Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2
S = τ*t_c/7200*r^2
This formula uses 4 Variables

Variables Used

Storage Coefficient - Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer.
Transmissivity - (Measured in Square Meter per Second) - The Transmissivity refers to the measure of how much water can be transmitted horizontally through an aquifer is the product of the hydraulic conductivity of the aquifer and its saturated thickness.
Time at Which Steady-shape Conditions Develop - (Measured in Second) - Time at which Steady-Shape Conditions develop at the Outermost Observation Well.
Distance from Pumping Well - (Measured in Meter) - Distance from Pumping Well to the point where drawdown occurs.

STEP 1: Convert Input(s) to Base Unit

Transmissivity: 1.4 Square Meter per Second --> 1.4 Square Meter per Second No Conversion Required
Time at Which Steady-shape Conditions Develop: 100 Minute --> 6000 Second (Check conversion here)
Distance from Pumping Well: 3 Meter --> 3 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S = τ*t_c/7200*r^2 --> 1.4*6000/7200*3^2

Evaluating ... ...

S = 10.5

STEP 3: Convert Result to Output's Unit

10.5 --> No Conversion Required

FINAL ANSWER

10.5 <-- Storage Coefficient

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Time Drawdown Analysis » Storage Coefficient given time at which Steady Shape conditions develops

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Time Drawdown Analysis Calculators

Time at which Steady Shape Conditions Develop

LaTeX Go Time at Which Steady-shape Conditions Develop = (7200*Distance from Pumping Well^2*Storage Coefficient)/Transmissivity

Storage Coefficient given time at which Steady Shape conditions develops

LaTeX Go Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2

Transmissivity derived from time drawdown graphs

LaTeX Go Transmissivity = (2.3*Pumping Rate)/(4*pi*Drawdown Across One Log Cycle)

Equation for pumping rate of transmissivity from time drawdown graphs

LaTeX Go Pumping Rate = (Transmissivity*4*pi*Drawdown Across Log Cycle)/2.3

Storage Coefficient given time at which Steady Shape conditions develops Formula

LaTeX Go

Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2
S = τ*t_c/7200*r^2

What is Storage Coefficient?

Storage Coefficient is the volume of water released from storage per unit decline in hydraulic head in the aquifer, per unit area of the aquifer. Storage Coefficient is a dimensionless quantity, and is always greater than 0.

How to Calculate Storage Coefficient given time at which Steady Shape conditions develops?

Storage Coefficient given time at which Steady Shape conditions develops calculator uses Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2 to calculate the Storage Coefficient, Storage coefficient given time at which steady shape conditions develops is the volume of water that can be removed from an aquifer for a given drop in hydraulic head. Storage Coefficient is denoted by S symbol.

How to calculate Storage Coefficient given time at which Steady Shape conditions develops using this online calculator? To use this online calculator for Storage Coefficient given time at which Steady Shape conditions develops, enter Transmissivity (τ), Time at Which Steady-shape Conditions Develop (t_c) & Distance from Pumping Well (r) and hit the calculate button. Here is how the Storage Coefficient given time at which Steady Shape conditions develops calculation can be explained with given input values -> 10.5 = 1.4*6000/7200*3^2.

FAQ

What is Storage Coefficient given time at which Steady Shape conditions develops?

Storage coefficient given time at which steady shape conditions develops is the volume of water that can be removed from an aquifer for a given drop in hydraulic head and is represented as S = τ*t_c/7200*r^2 or Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2. The Transmissivity refers to the measure of how much water can be transmitted horizontally through an aquifer is the product of the hydraulic conductivity of the aquifer and its saturated thickness, Time at which Steady-Shape Conditions develop at the Outermost Observation Well & Distance from Pumping Well to the point where drawdown occurs.

How to calculate Storage Coefficient given time at which Steady Shape conditions develops?

Storage coefficient given time at which steady shape conditions develops is the volume of water that can be removed from an aquifer for a given drop in hydraulic head is calculated using Storage Coefficient = Transmissivity*Time at Which Steady-shape Conditions Develop/7200*Distance from Pumping Well^2. To calculate Storage Coefficient given time at which Steady Shape conditions develops, you need Transmissivity (τ), Time at Which Steady-shape Conditions Develop (t_c) & Distance from Pumping Well (r). With our tool, you need to enter the respective value for Transmissivity, Time at Which Steady-shape Conditions Develop & Distance from Pumping Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Storage Coefficient?

In this formula, Storage Coefficient uses Transmissivity, Time at Which Steady-shape Conditions Develop & Distance from Pumping Well. We can use 1 other way(s) to calculate the same, which is/are as follows -

Storage Coefficient = (Transmissivity*Time at the Point of Intersection)/(640*Distance from Pumping Well^2)

Home

FREE PDFs

🔍 Search