Storage at End of Time Interval in Modified Pul's Method Solution

STEP 0: Pre-Calculation Summary
Formula Used
Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2)
S2 = ((I1+I2)/2)*Δt+(S1-(Q1*Δt/2))-(Q2*Δt/2)
This formula uses 7 Variables
Variables Used
Storage at the End of Time Interval - Storage at the End of Time Interval is the amount of water stored in reservoirs within the system of hydrological cycle at the end of the time.
Inflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Inflow at the Beginning of Time Interval is the amount of water entering a body of water at the start of the time.
Inflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Inflow at the End of Time Interval is the amount of water entering a body of water at the end of the time.
Time Interval - (Measured in Second) - Time Interval is the amount of time required for the change from the initial to the final state.
Storage at the Beginning of Time Interval - Storage at the Beginning of Time Interval is the amount of water stored in reservoirs within the system of the hydrological cycle at the start of the time. Make Validation type greater than zero.
Outflow at the Beginning of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time.
Outflow at the End of Time Interval - (Measured in Cubic Meter per Second) - Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.
STEP 1: Convert Input(s) to Base Unit
Inflow at the Beginning of Time Interval: 55 Cubic Meter per Second --> 55 Cubic Meter per Second No Conversion Required
Inflow at the End of Time Interval: 65 Cubic Meter per Second --> 65 Cubic Meter per Second No Conversion Required
Time Interval: 5 Second --> 5 Second No Conversion Required
Storage at the Beginning of Time Interval: 15 --> No Conversion Required
Outflow at the Beginning of Time Interval: 48 Cubic Meter per Second --> 48 Cubic Meter per Second No Conversion Required
Outflow at the End of Time Interval: 64 Cubic Meter per Second --> 64 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
S2 = ((I1+I2)/2)*Δt+(S1-(Q1*Δt/2))-(Q2*Δt/2) --> ((55+65)/2)*5+(15-(48*5/2))-(64*5/2)
Evaluating ... ...
S2 = 35
STEP 3: Convert Result to Output's Unit
35 --> No Conversion Required
FINAL ANSWER
35 <-- Storage at the End of Time Interval
(Calculation completed in 00.007 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

Modified Pul's Method Calculators

Storage at Beginning of Time Interval in Modified Pul's Method
​ LaTeX ​ Go Storage at the Beginning of Time Interval = (Storage at the End of Time Interval+(Outflow at the End of Time Interval*Time Interval/2))-((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Outflow at the Beginning of Time Interval*Time Interval/2)
Storage at End of Time Interval in Modified Pul's Method
​ LaTeX ​ Go Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2)

Storage at End of Time Interval in Modified Pul's Method Formula

​LaTeX ​Go
Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2)
S2 = ((I1+I2)/2)*Δt+(S1-(Q1*Δt/2))-(Q2*Δt/2)

What is Spillway?

A Spillway is a structure used to provide the controlled release of flows from a dam or levee into a downstream area, typically the riverbed of the dammed river itself.

How to Calculate Storage at End of Time Interval in Modified Pul's Method?

Storage at End of Time Interval in Modified Pul's Method calculator uses Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2) to calculate the Storage at the End of Time Interval, The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another. Storage at the End of Time Interval is denoted by S2 symbol.

How to calculate Storage at End of Time Interval in Modified Pul's Method using this online calculator? To use this online calculator for Storage at End of Time Interval in Modified Pul's Method, enter Inflow at the Beginning of Time Interval (I1), Inflow at the End of Time Interval (I2), Time Interval (Δt), Storage at the Beginning of Time Interval (S1), Outflow at the Beginning of Time Interval (Q1) & Outflow at the End of Time Interval (Q2) and hit the calculate button. Here is how the Storage at End of Time Interval in Modified Pul's Method calculation can be explained with given input values -> 35 = ((55+65)/2)*5+(15-(48*5/2))-(64*5/2).

FAQ

What is Storage at End of Time Interval in Modified Pul's Method?
The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another and is represented as S2 = ((I1+I2)/2)*Δt+(S1-(Q1*Δt/2))-(Q2*Δt/2) or Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2). Inflow at the Beginning of Time Interval is the amount of water entering a body of water at the start of the time, Inflow at the End of Time Interval is the amount of water entering a body of water at the end of the time, Time Interval is the amount of time required for the change from the initial to the final state, Storage at the Beginning of Time Interval is the amount of water stored in reservoirs within the system of the hydrological cycle at the start of the time. Make Validation type greater than zero, Outflow at the Beginning of Time Interval is the removal of water from the hydrological cycle at the start of the time & Outflow at the End of Time Interval is the removal of water from the hydrological cycle at the end of the time.
How to calculate Storage at End of Time Interval in Modified Pul's Method?
The Storage at End of Time Interval in Modified Pul's Method formula is defined as the water in the system resides or "rests" as it moves from one water reservoir to another is calculated using Storage at the End of Time Interval = ((Inflow at the Beginning of Time Interval+Inflow at the End of Time Interval)/2)*Time Interval+(Storage at the Beginning of Time Interval-(Outflow at the Beginning of Time Interval*Time Interval/2))-(Outflow at the End of Time Interval*Time Interval/2). To calculate Storage at End of Time Interval in Modified Pul's Method, you need Inflow at the Beginning of Time Interval (I1), Inflow at the End of Time Interval (I2), Time Interval (Δt), Storage at the Beginning of Time Interval (S1), Outflow at the Beginning of Time Interval (Q1) & Outflow at the End of Time Interval (Q2). With our tool, you need to enter the respective value for Inflow at the Beginning of Time Interval, Inflow at the End of Time Interval, Time Interval, Storage at the Beginning of Time Interval, Outflow at the Beginning of Time Interval & Outflow at the End of Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!