Stop-and-Wait ARQ Technique Calculator

✖Number of Word Message Consist in a message can vary depending on the specific protocol and encoding scheme being used.ⓘ Number of Word Message Consist [N_wd]			+10% -10%
✖Information bits refer to the fundamental units of data that are transmitted and received between devices or systems.ⓘ Information Bits [L]			+10% -10%
✖Header bits refer to the bits of information included at the beginning of a data transmission packet or frame.ⓘ Header Bits [H]			+10% -10%
✖Number of Bits per Word refers to the number of binary bits contained in a single word of data transmitted over the wireless channel.ⓘ Number of Bits per Word [B_wd]			+10% -10%
✖Expected Number of Transmission refers to the average number of times a packet or data transmission needs to be sent from a transmitter to a receiver in order to achieve successful delivery.ⓘ Expected Number of Transmission [E_n]			+10% -10%

✖Stop-and-Wait ARQ Technique used in wireless communication to ensure reliable data transmission between a sender and a receiver.ⓘ Stop-and-Wait ARQ Technique [R]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mobile Radio Propogation Formulas PDF PDF Image

Stop-and-Wait ARQ Technique Solution

STEP 0: Pre-Calculation Summary

Formula Used

Stop-and-Wait ARQ Technique = (Number of Word Message Consist*Information Bits)/((Header Bits+Number of Bits per Word*Number of Word Message Consist)*Expected Number of Transmission)
R = (N_wd*L)/((H+B_wd*N_wd)*E_n)
This formula uses 6 Variables

Variables Used

Stop-and-Wait ARQ Technique - Stop-and-Wait ARQ Technique used in wireless communication to ensure reliable data transmission between a sender and a receiver.
Number of Word Message Consist - Number of Word Message Consist in a message can vary depending on the specific protocol and encoding scheme being used.
Information Bits - Information bits refer to the fundamental units of data that are transmitted and received between devices or systems.
Header Bits - Header bits refer to the bits of information included at the beginning of a data transmission packet or frame.
Number of Bits per Word - Number of Bits per Word refers to the number of binary bits contained in a single word of data transmitted over the wireless channel.
Expected Number of Transmission - Expected Number of Transmission refers to the average number of times a packet or data transmission needs to be sent from a transmitter to a receiver in order to achieve successful delivery.

STEP 1: Convert Input(s) to Base Unit

Number of Word Message Consist: 19 --> No Conversion Required
Information Bits: 3 --> No Conversion Required
Header Bits: 9 --> No Conversion Required
Number of Bits per Word: 12 --> No Conversion Required
Expected Number of Transmission: 4 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R = (N_wd*L)/((H+B_wd*N_wd)*E_n) --> (19*3)/((9+12*19)*4)

Evaluating ... ...

R = 0.060126582278481

STEP 3: Convert Result to Output's Unit

0.060126582278481 --> No Conversion Required

FINAL ANSWER

0.060126582278481 ≈ 0.060127 <-- Stop-and-Wait ARQ Technique

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Wireless Communication » Mobile Radio Propogation » Stop-and-Wait ARQ Technique

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Mobile Radio Propogation Calculators

Level Crossing Rate

LaTeX Go Level Crossing Rate = (sqrt(2*pi))*Maximum Doppler Shift*Normalized RMS Value*e^(-(Normalized RMS Value^2))

Mobile Radio Distance

LaTeX Go Transmitter Reciever Distance = (Path Loss Coefficient/Mobile Reciever Carrier Power)^(1/4)

Mobile Radio Signal

LaTeX Go Mobile Radio Signal = Long Term Fading*Multipath Fading

Multipath Fading

LaTeX Go Multipath Fading = Mobile Radio Signal/Long Term Fading

Stop-and-Wait ARQ Technique Formula

LaTeX Go

How much is a bit of information?

The word "bit" is short for "binary digit." A bit is the smallest piece of computer information. byte: Most computers use combinations of eight bits, called bytes, to represent one character of data. For example, the word "cat" has three characters, and it would be represented by three bytes.

How to Calculate Stop-and-Wait ARQ Technique?

Stop-and-Wait ARQ Technique calculator uses Stop-and-Wait ARQ Technique = (Number of Word Message Consist*Information Bits)/((Header Bits+Number of Bits per Word*Number of Word Message Consist)*Expected Number of Transmission) to calculate the Stop-and-Wait ARQ Technique, The Stop-and-wait ARQ technique formula is defined as Stop-and-wait ARQ, also referred to as alternating bit protocol, is a method in telecommunications to send information between two connected devices. It ensures that information is not lost due to dropped packets and that packets are received in the correct order. Stop-and-Wait ARQ Technique is denoted by R symbol.

How to calculate Stop-and-Wait ARQ Technique using this online calculator? To use this online calculator for Stop-and-Wait ARQ Technique, enter Number of Word Message Consist (N_wd), Information Bits (L), Header Bits (H), Number of Bits per Word (B_wd) & Expected Number of Transmission (E_n) and hit the calculate button. Here is how the Stop-and-Wait ARQ Technique calculation can be explained with given input values -> 0.060127 = (19*3)/((9+12*19)*4).

FAQ

What is Stop-and-Wait ARQ Technique?

The Stop-and-wait ARQ technique formula is defined as Stop-and-wait ARQ, also referred to as alternating bit protocol, is a method in telecommunications to send information between two connected devices. It ensures that information is not lost due to dropped packets and that packets are received in the correct order and is represented as R = (N_wd*L)/((H+B_wd*N_wd)*E_n) or Stop-and-Wait ARQ Technique = (Number of Word Message Consist*Information Bits)/((Header Bits+Number of Bits per Word*Number of Word Message Consist)*Expected Number of Transmission). Number of Word Message Consist in a message can vary depending on the specific protocol and encoding scheme being used, Information bits refer to the fundamental units of data that are transmitted and received between devices or systems, Header bits refer to the bits of information included at the beginning of a data transmission packet or frame, Number of Bits per Word refers to the number of binary bits contained in a single word of data transmitted over the wireless channel & Expected Number of Transmission refers to the average number of times a packet or data transmission needs to be sent from a transmitter to a receiver in order to achieve successful delivery.

How to calculate Stop-and-Wait ARQ Technique?

The Stop-and-wait ARQ technique formula is defined as Stop-and-wait ARQ, also referred to as alternating bit protocol, is a method in telecommunications to send information between two connected devices. It ensures that information is not lost due to dropped packets and that packets are received in the correct order is calculated using Stop-and-Wait ARQ Technique = (Number of Word Message Consist*Information Bits)/((Header Bits+Number of Bits per Word*Number of Word Message Consist)*Expected Number of Transmission). To calculate Stop-and-Wait ARQ Technique, you need Number of Word Message Consist (N_wd), Information Bits (L), Header Bits (H), Number of Bits per Word (B_wd) & Expected Number of Transmission (E_n). With our tool, you need to enter the respective value for Number of Word Message Consist, Information Bits, Header Bits, Number of Bits per Word & Expected Number of Transmission and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search