Stirrup Area given Support Angle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Stirrup Area = (Strength of Shear Reinforcement)/(Yield Strength of Reinforcement)*sin(Angle at which Stirrup is inclined)
Av = (Vs)/(fy)*sin(α)
This formula uses 1 Functions, 4 Variables
Functions Used
sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
Variables Used
Stirrup Area - (Measured in Square Meter) - Stirrup Area is the total cross-sectional area of the stirrup bars used.
Strength of Shear Reinforcement - (Measured in Newton) - Strength of Shear reinforcements are designed to withstand shear or diagonal stresses acting on the structure.
Yield Strength of Reinforcement - (Measured in Pascal) - Yield Strength of Reinforcement is stress at which a predetermined amount of permanent deformation occurs.
Angle at which Stirrup is inclined - (Measured in Radian) - Angle at which Stirrup is inclined series constitutes bars that are bent up at different distances from the support or when the stirrup is inclined.
STEP 1: Convert Input(s) to Base Unit
Strength of Shear Reinforcement: 200 Kilonewton --> 200000 Newton (Check conversion ​here)
Yield Strength of Reinforcement: 9.99 Megapascal --> 9990000 Pascal (Check conversion ​here)
Angle at which Stirrup is inclined: 30 Degree --> 0.5235987755982 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Av = (Vs)/(fy)*sin(α) --> (200000)/(9990000)*sin(0.5235987755982)
Evaluating ... ...
Av = 0.01001001001001
STEP 3: Convert Result to Output's Unit
0.01001001001001 Square Meter -->10010.01001001 Square Millimeter (Check conversion ​here)
FINAL ANSWER
10010.01001001 10010.01 Square Millimeter <-- Stirrup Area
(Calculation completed in 00.007 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

Shear Reinforcement Calculators

Nominal Shear Strength of Concrete
​ LaTeX ​ Go Nominal Shear Strength of Concrete = (1.9*sqrt(28 Day Compressive Strength of Concrete)+((2500*Reinforcement Ratio of Web Section)*((Shear Force in considered Section*Centroidal Distance of Tension Reinforcement)/Bending Moment of Considered Section)))*(Width of Beam Web*Centroidal Distance of Tension Reinforcement)
Area of Steel Required in Vertical Stirrups
​ LaTeX ​ Go Area of Steel required = (Nominal Shear Strength by Reinforcement*Stirrup Spacing)/(Yield Strength of Steel*Centroidal Distance of Tension Reinforcement)
Ultimate Shear Capacity of Beam Section
​ LaTeX ​ Go Ultimate Shear Capacity = (Nominal Shear Strength of Concrete+Nominal Shear Strength by Reinforcement)
Nominal Shear Strength Provided by Reinforcement
​ LaTeX ​ Go Nominal Shear Strength by Reinforcement = Ultimate Shear Capacity-Nominal Shear Strength of Concrete

Stirrup Area given Support Angle Formula

​LaTeX ​Go
Stirrup Area = (Strength of Shear Reinforcement)/(Yield Strength of Reinforcement)*sin(Angle at which Stirrup is inclined)
Av = (Vs)/(fy)*sin(α)

What is a Stirrup?

A stirrup is a steel bar bent into a "U" or box shape and installed perpendicular to, or at an angle to the longitudinal reinforcement. and properly anchored in RCC members.

Why do we give Stirrups?

Stirrups are placed at proper intervals to beams to prevent them from deformation/shear failure of beam. This is done to prevent shear failure which is usually diagonal in case of cracks in beams.

How to Calculate Stirrup Area given Support Angle?

Stirrup Area given Support Angle calculator uses Stirrup Area = (Strength of Shear Reinforcement)/(Yield Strength of Reinforcement)*sin(Angle at which Stirrup is inclined) to calculate the Stirrup Area, The Stirrup Area given Support Angle is defined as the area required when a single bar or a group of parallel bars are all bent up at the same distance from the support at an angle with the longitudinal axis of the member. Stirrup Area is denoted by Av symbol.

How to calculate Stirrup Area given Support Angle using this online calculator? To use this online calculator for Stirrup Area given Support Angle, enter Strength of Shear Reinforcement (Vs), Yield Strength of Reinforcement (fy) & Angle at which Stirrup is inclined (α) and hit the calculate button. Here is how the Stirrup Area given Support Angle calculation can be explained with given input values -> 1E+10 = (200000)/(9990000)*sin(0.5235987755982).

FAQ

What is Stirrup Area given Support Angle?
The Stirrup Area given Support Angle is defined as the area required when a single bar or a group of parallel bars are all bent up at the same distance from the support at an angle with the longitudinal axis of the member and is represented as Av = (Vs)/(fy)*sin(α) or Stirrup Area = (Strength of Shear Reinforcement)/(Yield Strength of Reinforcement)*sin(Angle at which Stirrup is inclined). Strength of Shear reinforcements are designed to withstand shear or diagonal stresses acting on the structure, Yield Strength of Reinforcement is stress at which a predetermined amount of permanent deformation occurs & Angle at which Stirrup is inclined series constitutes bars that are bent up at different distances from the support or when the stirrup is inclined.
How to calculate Stirrup Area given Support Angle?
The Stirrup Area given Support Angle is defined as the area required when a single bar or a group of parallel bars are all bent up at the same distance from the support at an angle with the longitudinal axis of the member is calculated using Stirrup Area = (Strength of Shear Reinforcement)/(Yield Strength of Reinforcement)*sin(Angle at which Stirrup is inclined). To calculate Stirrup Area given Support Angle, you need Strength of Shear Reinforcement (Vs), Yield Strength of Reinforcement (fy) & Angle at which Stirrup is inclined (α). With our tool, you need to enter the respective value for Strength of Shear Reinforcement, Yield Strength of Reinforcement & Angle at which Stirrup is inclined and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Stirrup Area?
In this formula, Stirrup Area uses Strength of Shear Reinforcement, Yield Strength of Reinforcement & Angle at which Stirrup is inclined. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Stirrup Area = (Stirrup Spacing)*(Design of Shear Stress-(2*Capacity Reduction Factor*sqrt(28 Day Compressive Strength of Concrete)*Effective Depth of Beam*Breadth of Web))/(Capacity Reduction Factor*Yield Strength of Reinforcement*Effective Depth of Beam)
  • Stirrup Area = (Strength of Shear Reinforcement*Stirrup Spacing)/((sin(Angle at which Stirrup is inclined)+cos(Angle at which Stirrup is inclined))*Yield Strength of Reinforcement*Effective Depth of Beam)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!