Still Water Depth given Total Water Depth Calculator

✖Coastal Water Depth is the depth measured from the water level to the bottom of the considered water body.ⓘ Coastal Water Depth [H_c]			+10% -10%
✖Mean Water Surface Elevation is the average height of a body of water’s surface.ⓘ Mean Water Surface Elevation [η']			+10% -10%

✖Still-Water Depth refers to the depth of the water at a particular location, excluding the effects of waves and other short-term fluctuations.ⓘ Still Water Depth given Total Water Depth [h]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Wave Setup Formulas PDF PDF Image

Still Water Depth given Total Water Depth Solution

STEP 0: Pre-Calculation Summary

Formula Used

Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation
h = H_c-η'
This formula uses 3 Variables

Variables Used

Still-Water Depth - (Measured in Meter) - Still-Water Depth refers to the depth of the water at a particular location, excluding the effects of waves and other short-term fluctuations.
Coastal Water Depth - (Measured in Meter) - Coastal Water Depth is the depth measured from the water level to the bottom of the considered water body.
Mean Water Surface Elevation - (Measured in Meter) - Mean Water Surface Elevation is the average height of a body of water’s surface.

STEP 1: Convert Input(s) to Base Unit

Coastal Water Depth: 49 Meter --> 49 Meter No Conversion Required
Mean Water Surface Elevation: 29 Meter --> 29 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h = H_c-η' --> 49-29

Evaluating ... ...

h = 20

STEP 3: Convert Result to Output's Unit

20 Meter --> No Conversion Required

FINAL ANSWER

20 Meter <-- Still-Water Depth

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Wave Setup » Still Water Depth given Total Water Depth

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Wave Setup Calculators

Set down for Regular Waves

LaTeX Go Mean Water Surface Elevation of Coast = (-1/8)*((Wave Height^2*(2*pi/Wavelength of Coast))/(sinh(4*pi*Water Depth/Wavelength of Coast)))

Mean Water Surface Elevation given Total Water Depth

LaTeX Go Mean Water Surface Elevation = Coastal Water Depth-Still-Water Depth

Still Water Depth given Total Water Depth

LaTeX Go Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation

Total Water Depth

LaTeX Go Coastal Water Depth = Still-Water Depth+Mean Water Surface Elevation

Still Water Depth given Total Water Depth Formula

LaTeX Go

Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation
h = H_c-η'

What is Wave Runup & Wave Setup and Setdown?

Wave runup is the maximum vertical extent of wave uprush on a beach or structure above the still water level (SWL). It is the sum of wave set-up and swash uprush (see Swash Zone Dynamics) and must be added to the water level reached as a result of tides and wind set-up.
The wave setup is the increase in mean water level due to the presence of breaking waves. Similarly, wave set down is a wave-induced decrease of the mean water level before the waves break.
The wave setdown is a wave-induced decrease of the mean water level before the waves break (during the shoaling process). For short, the whole phenomenon is often denoted as wave setup, including both increase and decrease of mean elevation.

Define Breaking Wave & cause of Regular Waves.

In fluid dynamics, a breaking wave or breaker is a wave whose amplitude reaches a critical level at which some process can suddenly start to occur causing large amounts of wave energy to be transformed into turbulent kinetic energy.
Waves are most commonly caused by wind. Wind-driven waves, or surface waves, are created by the friction between wind and surface water. As the wind blows across the surface of the ocean or a lake, the continual disturbance creates a wave crest. The gravitational pull of the Sun and Moon on the Earth causes waves.

How to Calculate Still Water Depth given Total Water Depth?

Still Water Depth given Total Water Depth calculator uses Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation to calculate the Still-Water Depth, The Still Water Depth given Total Water Depth formula is defined as the depth of the level that the sea surface (at a given point and time) would assume in the absence of wind waves which are influenced by astronomical and meteorological effects. Still-Water Depth is denoted by h symbol.

How to calculate Still Water Depth given Total Water Depth using this online calculator? To use this online calculator for Still Water Depth given Total Water Depth, enter Coastal Water Depth (H_c) & Mean Water Surface Elevation (η') and hit the calculate button. Here is how the Still Water Depth given Total Water Depth calculation can be explained with given input values -> 20.05 = 49-29.

FAQ

What is Still Water Depth given Total Water Depth?

The Still Water Depth given Total Water Depth formula is defined as the depth of the level that the sea surface (at a given point and time) would assume in the absence of wind waves which are influenced by astronomical and meteorological effects and is represented as h = H_c-η' or Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation. Coastal Water Depth is the depth measured from the water level to the bottom of the considered water body & Mean Water Surface Elevation is the average height of a body of water’s surface.

How to calculate Still Water Depth given Total Water Depth?

The Still Water Depth given Total Water Depth formula is defined as the depth of the level that the sea surface (at a given point and time) would assume in the absence of wind waves which are influenced by astronomical and meteorological effects is calculated using Still-Water Depth = Coastal Water Depth-Mean Water Surface Elevation. To calculate Still Water Depth given Total Water Depth, you need Coastal Water Depth (H_c) & Mean Water Surface Elevation (η'). With our tool, you need to enter the respective value for Coastal Water Depth & Mean Water Surface Elevation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search