Splitting Tensile Strength of Concrete Calculator

✖Maximum Load Applied is the highest force or weight exerted on a structure or object before it fails or becomes compromised.ⓘ Maximum Load Applied [W_load]			+10% -10%
✖Diameter of Cylinder 1 is the diameter of the first cylinder.ⓘ Diameter of Cylinder 1 [D₁]			+10% -10%
✖Length of Cylinder is the vertical height of the cylinder.ⓘ Length of Cylinder [L_c]			+10% -10%

✖Splitting Tensile Strength of Concrete consists of applying a diametric compressive load along the entire length until failure occurs.ⓘ Splitting Tensile Strength of Concrete [σsp]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mix Design, Modulus of Elasticity and Tensile Strength of Concrete Formulas PDF PDF Image

Splitting Tensile Strength of Concrete Solution

STEP 0: Pre-Calculation Summary

Formula Used

Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder)
σsp = (2*W_load)/(pi*D₁*L_c)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Splitting Tensile Strength of Concrete - (Measured in Pascal) - Splitting Tensile Strength of Concrete consists of applying a diametric compressive load along the entire length until failure occurs.
Maximum Load Applied - (Measured in Newton) - Maximum Load Applied is the highest force or weight exerted on a structure or object before it fails or becomes compromised.
Diameter of Cylinder 1 - (Measured in Meter) - Diameter of Cylinder 1 is the diameter of the first cylinder.
Length of Cylinder - (Measured in Meter) - Length of Cylinder is the vertical height of the cylinder.

STEP 1: Convert Input(s) to Base Unit

Maximum Load Applied: 3.6 Kilonewton --> 3600 Newton (Check conversion here)
Diameter of Cylinder 1: 5 Meter --> 5 Meter No Conversion Required
Length of Cylinder: 12 Meter --> 12 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σsp = (2*W_load)/(pi*D₁*L_c) --> (2*3600)/(pi*5*12)

Evaluating ... ...

σsp = 38.1971863420549

STEP 3: Convert Result to Output's Unit

38.1971863420549 Pascal -->38.1971863420549 Newton per Square Meter (Check conversion here)

FINAL ANSWER

38.1971863420549 ≈ 38.19719 Newton per Square Meter <-- Splitting Tensile Strength of Concrete

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Concrete Formulas » Mix Design, Modulus of Elasticity and Tensile Strength of Concrete » Tensile Strength of Concrete » Splitting Tensile Strength of Concrete

Credits

Created by Swarnima Singh

NIT Jaipur (mnitj), jaipur

Swarnima Singh has created this Calculator and 10+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Tensile Strength of Concrete Calculators

Splitting Tensile Strength of Concrete

LaTeX Go Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder)

Maximum Load Applied during Splitting Tensile Strength of Concrete

LaTeX Go Maximum Load Applied = (Splitting Tensile Strength of Concrete*pi*Diameter of Cylinder 1*Length of Cylinder)/2

Tensile Strength of Normal Weight and Density Concrete in SI Units

LaTeX Go Tensile Strength of Concrete = 0.7*sqrt(Specified 28-Day Compressive Strength of Concrete)

Tensile Strength of Concrete in Combined Stress Design

LaTeX Go Tensile Strength of Concrete = 7.5*sqrt(Specified 28-Day Compressive Strength of Concrete)

Splitting Tensile Strength of Concrete Formula

LaTeX Go

Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder)
σsp = (2*W_load)/(pi*D₁*L_c)

What is Splitting Tensile Strength of Concrete?

Concrete develops cracks when tensile forces exceed its tensile strength. Therefore, it is necessary to determine the tensile strength of concrete to determine the load at which the concrete members may crack. Furthermore, splitting tensile strength test on concrete cylinder is a method to determine the tensile strength of concrete.

How to Calculate Splitting Tensile Strength of Concrete?

Splitting Tensile Strength of Concrete calculator uses Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder) to calculate the Splitting Tensile Strength of Concrete, The Splitting Tensile Strength of Concrete formula is defined as a measure of the maximum stress on the tension face of an unreinforced concrete beam or slab at the point of failure in bending. Splitting Tensile Strength of Concrete is denoted by σsp symbol.

How to calculate Splitting Tensile Strength of Concrete using this online calculator? To use this online calculator for Splitting Tensile Strength of Concrete, enter Maximum Load Applied (W_load), Diameter of Cylinder 1 (D₁) & Length of Cylinder (L_c) and hit the calculate button. Here is how the Splitting Tensile Strength of Concrete calculation can be explained with given input values -> 38.19719 = (2*3600)/(pi*5*12).

FAQ

What is Splitting Tensile Strength of Concrete?

The Splitting Tensile Strength of Concrete formula is defined as a measure of the maximum stress on the tension face of an unreinforced concrete beam or slab at the point of failure in bending and is represented as σsp = (2*W_load)/(pi*D₁*L_c) or Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder). Maximum Load Applied is the highest force or weight exerted on a structure or object before it fails or becomes compromised, Diameter of Cylinder 1 is the diameter of the first cylinder & Length of Cylinder is the vertical height of the cylinder.

How to calculate Splitting Tensile Strength of Concrete?

The Splitting Tensile Strength of Concrete formula is defined as a measure of the maximum stress on the tension face of an unreinforced concrete beam or slab at the point of failure in bending is calculated using Splitting Tensile Strength of Concrete = (2*Maximum Load Applied)/(pi*Diameter of Cylinder 1*Length of Cylinder). To calculate Splitting Tensile Strength of Concrete, you need Maximum Load Applied (W_load), Diameter of Cylinder 1 (D₁) & Length of Cylinder (L_c). With our tool, you need to enter the respective value for Maximum Load Applied, Diameter of Cylinder 1 & Length of Cylinder and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search