Speed at Haul and Return in Miles per Hour given Variable Time Calculator

✖Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.ⓘ Haul Distance in Feet [H_ft]			+10% -10%
✖Return Distance in Foot in Scraper Production is the journey back from a destination.ⓘ Return Distance in Foot in Scraper Production [R_ft]			+10% -10%
✖Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.ⓘ Variable Time in Scraper Production [T_v]			+10% -10%

✖Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .ⓘ Speed at Haul and Return in Miles per Hour given Variable Time [S_mph]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Speed at Haul and Return in Miles per Hour given Variable Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production)
S_mph = (H_ft+R_ft)/(88*T_v)
This formula uses 4 Variables

Variables Used

Speed in Miles per Hour in Scraper Production - (Measured in Meter per Second) - Speed in Miles per Hour in Scraper Production is defined as distance covered in a particular time .
Haul Distance in Feet - (Measured in Meter) - Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation.
Return Distance in Foot in Scraper Production - (Measured in Meter) - Return Distance in Foot in Scraper Production is the journey back from a destination.
Variable Time in Scraper Production - (Measured in Second) - Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.

STEP 1: Convert Input(s) to Base Unit

Haul Distance in Feet: 66.92 Foot --> 20.3972160000816 Meter (Check conversion here)
Return Distance in Foot in Scraper Production: 3.3 Foot --> 1.00584000000402 Meter (Check conversion here)
Variable Time in Scraper Production: 0.2 Minute --> 12 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_mph = (H_ft+R_ft)/(88*T_v) --> (20.3972160000816+1.00584000000402)/(88*12)

Evaluating ... ...

S_mph = 0.0202680454546265

STEP 3: Convert Result to Output's Unit

0.0202680454546265 Meter per Second -->0.0453383264464623 Mile per Hour (Check conversion here)

FINAL ANSWER

0.0453383264464623 ≈ 0.045338 Mile per Hour <-- Speed in Miles per Hour in Scraper Production

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Speed at Haul and Return in Miles per Hour given Variable Time

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Speed at Haul and Return in Miles per Hour given Variable Time Formula

LaTeX Go

Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production)
S_mph = (H_ft+R_ft)/(88*T_v)

What is Haul Distance?

The distance measured along the center line or most direct practical route between the center of the mass of excavation and the center of mass of the fill as finally placed. It is the distance material is moved.

How to Calculate Speed at Haul and Return in Miles per Hour given Variable Time?

Speed at Haul and Return in Miles per Hour given Variable Time calculator uses Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production) to calculate the Speed in Miles per Hour in Scraper Production, The Speed at Haul and Return in Miles per Hour given Variable Time formula is defined as distance covered per unit time. Speed in Miles per Hour in Scraper Production is denoted by S_mph symbol.

How to calculate Speed at Haul and Return in Miles per Hour given Variable Time using this online calculator? To use this online calculator for Speed at Haul and Return in Miles per Hour given Variable Time, enter Haul Distance in Feet (H_ft), Return Distance in Foot in Scraper Production (R_ft) & Variable Time in Scraper Production (T_v) and hit the calculate button. Here is how the Speed at Haul and Return in Miles per Hour given Variable Time calculation can be explained with given input values -> 0.101419 = (20.3972160000816+1.00584000000402)/(88*12).

FAQ

What is Speed at Haul and Return in Miles per Hour given Variable Time?

The Speed at Haul and Return in Miles per Hour given Variable Time formula is defined as distance covered per unit time and is represented as S_mph = (H_ft+R_ft)/(88*T_v) or Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production). Haul Distance in Feet is the specified distance the excavated material is hauled without additional compensation, Return Distance in Foot in Scraper Production is the journey back from a destination & Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.

How to calculate Speed at Haul and Return in Miles per Hour given Variable Time?

The Speed at Haul and Return in Miles per Hour given Variable Time formula is defined as distance covered per unit time is calculated using Speed in Miles per Hour in Scraper Production = (Haul Distance in Feet+Return Distance in Foot in Scraper Production)/(88*Variable Time in Scraper Production). To calculate Speed at Haul and Return in Miles per Hour given Variable Time, you need Haul Distance in Feet (H_ft), Return Distance in Foot in Scraper Production (R_ft) & Variable Time in Scraper Production (T_v). With our tool, you need to enter the respective value for Haul Distance in Feet, Return Distance in Foot in Scraper Production & Variable Time in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search