Speed at Haul and Return in Kilometer per Hour given Variable Time Calculator

✖Haul Distance is the specified distance the excavated material is hauled without additional compensation.ⓘ Haul Distance [h_m]			+10% -10%
✖Return Distance in Meter is the journey back from a destination in meter.ⓘ Return Distance in Meter [R_meter]			+10% -10%
✖Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.ⓘ Variable Time in Scraper Production [T_v]			+10% -10%

✖Speed in Kmph in Scraper Production is defined as distance in km covered per unit hour.ⓘ Speed at Haul and Return in Kilometer per Hour given Variable Time [S_kmph]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Scraper Production Formulas PDF PDF Image

Speed at Haul and Return in Kilometer per Hour given Variable Time Solution

STEP 0: Pre-Calculation Summary

Formula Used

Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production)
S_kmph = (h_m+R_meter)/(16.7*T_v)
This formula uses 4 Variables

Variables Used

Speed in Kmph in Scraper Production - (Measured in Meter per Second) - Speed in Kmph in Scraper Production is defined as distance in km covered per unit hour.
Haul Distance - (Measured in Meter) - Haul Distance is the specified distance the excavated material is hauled without additional compensation.
Return Distance in Meter - (Measured in Meter) - Return Distance in Meter is the journey back from a destination in meter.
Variable Time in Scraper Production - (Measured in Second) - Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.

STEP 1: Convert Input(s) to Base Unit

Haul Distance: 6.4 Meter --> 6.4 Meter No Conversion Required
Return Distance in Meter: 1.49 Meter --> 1.49 Meter No Conversion Required
Variable Time in Scraper Production: 0.2 Minute --> 12 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_kmph = (h_m+R_meter)/(16.7*T_v) --> (6.4+1.49)/(16.7*12)

Evaluating ... ...

S_kmph = 0.0393712574850299

STEP 3: Convert Result to Output's Unit

0.0393712574850299 Meter per Second -->0.141736526946108 Kilometer per Hour (Check conversion here)

FINAL ANSWER

0.141736526946108 ≈ 0.141737 Kilometer per Hour <-- Speed in Kmph in Scraper Production

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Scraper Production » Speed at Haul and Return in Kilometer per Hour given Variable Time

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Scraper Production Calculators

Trips per Hour given Production of Scrap by Machines

LaTeX Go Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production)

Load Given Production of Scrap by Machines

LaTeX Go Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour)

Production of Scrap by Machines

LaTeX Go Production Required in Scraper Production = (Load in Scraper Production*Trips per Hour)

Trips per Hour for Excavating Scrap

LaTeX Go Trips per Hour = (Working Time in Scraper Production/Cycle Time)

Speed at Haul and Return in Kilometer per Hour given Variable Time Formula

LaTeX Go

Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production)
S_kmph = (h_m+R_meter)/(16.7*T_v)

What is Speed?

Speed can be thought of as the rate at which an object covers distance. A fast-moving object has a high speed and covers a relatively large distance in a given amount of time, while a slow-moving object covers a relatively small amount of distance in the same amount of time.

How to Calculate Speed at Haul and Return in Kilometer per Hour given Variable Time?

Speed at Haul and Return in Kilometer per Hour given Variable Time calculator uses Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production) to calculate the Speed in Kmph in Scraper Production, The Speed at Haul and Return in Kilometer per Hour given Variable Time is defined as the speed when we have prior information of return distance and haul distance. Speed in Kmph in Scraper Production is denoted by S_kmph symbol.

How to calculate Speed at Haul and Return in Kilometer per Hour given Variable Time using this online calculator? To use this online calculator for Speed at Haul and Return in Kilometer per Hour given Variable Time, enter Haul Distance (h_m), Return Distance in Meter (R_meter) & Variable Time in Scraper Production (T_v) and hit the calculate button. Here is how the Speed at Haul and Return in Kilometer per Hour given Variable Time calculation can be explained with given input values -> 0.510251 = (6.4+1.49)/(16.7*12).

FAQ

What is Speed at Haul and Return in Kilometer per Hour given Variable Time?

The Speed at Haul and Return in Kilometer per Hour given Variable Time is defined as the speed when we have prior information of return distance and haul distance and is represented as S_kmph = (h_m+R_meter)/(16.7*T_v) or Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production). Haul Distance is the specified distance the excavated material is hauled without additional compensation, Return Distance in Meter is the journey back from a destination in meter & Variable Time in Scraper Production is a schedule of stimulus presentation in which stimuli are presented, independently of any behavior.

How to calculate Speed at Haul and Return in Kilometer per Hour given Variable Time?

The Speed at Haul and Return in Kilometer per Hour given Variable Time is defined as the speed when we have prior information of return distance and haul distance is calculated using Speed in Kmph in Scraper Production = (Haul Distance+Return Distance in Meter)/(16.7*Variable Time in Scraper Production). To calculate Speed at Haul and Return in Kilometer per Hour given Variable Time, you need Haul Distance (h_m), Return Distance in Meter (R_meter) & Variable Time in Scraper Production (T_v). With our tool, you need to enter the respective value for Haul Distance, Return Distance in Meter & Variable Time in Scraper Production and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search