Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis Calculator

✖Specific Weight of the Mixture refers to the weight per unit volume of a mixture, such as water and suspended sediments or other materials, found in coastal environments.ⓘ Specific Weight of the Mixture [γ_m]			+10% -10%
✖Specific Weight of Water is the weight per unit volume of water.ⓘ Specific Weight of Water [y_w]			+10% -10%
✖Concentration of Soil in the Mixture refers to the proportion of sediment or soil particles within a water-sediment mixture.ⓘ Concentration of Soil in the Mixture [C_v]			+10% -10%

✖Specific Weight of Dry Sand Grains refers to the weight per unit volume of the sand particles when they are dry and compacted, excluding any void spaces or water content.ⓘ Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis [γ_g]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Dredging Equipment Formulas PDF PDF Image

Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Weight of Dry Sand Grains = ((Specific Weight of the Mixture-Specific Weight of Water)/Concentration of Soil in the Mixture)+Specific Weight of Water
γ_g = ((γ_m-y_w)/C_v)+y_w
This formula uses 4 Variables

Variables Used

Specific Weight of Dry Sand Grains - (Measured in Newton per Cubic Meter) - Specific Weight of Dry Sand Grains refers to the weight per unit volume of the sand particles when they are dry and compacted, excluding any void spaces or water content.
Specific Weight of the Mixture - (Measured in Newton per Cubic Meter) - Specific Weight of the Mixture refers to the weight per unit volume of a mixture, such as water and suspended sediments or other materials, found in coastal environments.
Specific Weight of Water - (Measured in Newton per Cubic Meter) - Specific Weight of Water is the weight per unit volume of water.
Concentration of Soil in the Mixture - (Measured in Cubic Meter) - Concentration of Soil in the Mixture refers to the proportion of sediment or soil particles within a water-sediment mixture.

STEP 1: Convert Input(s) to Base Unit

Specific Weight of the Mixture: 10 Kilonewton per Cubic Meter --> 10000 Newton per Cubic Meter (Check conversion here)
Specific Weight of Water: 9.807 Kilonewton per Cubic Meter --> 9807 Newton per Cubic Meter (Check conversion here)
Concentration of Soil in the Mixture: 0.03 Cubic Meter --> 0.03 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_g = ((γ_m-y_w)/C_v)+y_w --> ((10000-9807)/0.03)+9807

Evaluating ... ...

γ_g = 16240.3333333333

STEP 3: Convert Result to Output's Unit

16240.3333333333 Newton per Cubic Meter -->16.2403333333333 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

16.2403333333333 ≈ 16.24033 Kilonewton per Cubic Meter <-- Specific Weight of Dry Sand Grains

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Dredging Equipment » Plain Suction Dredge » Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Plain Suction Dredge Calculators

Flow Velocity in Suction Pipe

LaTeX Go Flow Velocity in the Suction Pipe = sqrt((((Vacuum at the Pump Entrance+Depth of the Suction Pipe Entrance)*Specific Weight of Water/Specific Weight of the Mixture)-Depth of the Suction Pipe Entrance+Depth of Submergence of the Pump)*(2*[g])/Fetch Length)

Hydraulic Loss Coefficient from Suction Pipe Entrance to Pump

LaTeX Go Hydraulic Loss Coefficient = (((Vacuum at the Pump Entrance+Depth of the Suction Pipe Entrance)*Specific Weight of Water/Specific Weight of the Mixture)-Depth of the Suction Pipe Entrance+Depth of Submergence of the Pump)/(Flow Velocity in the Suction Pipe^2/2*[g])

Vacuum at Pump Entrance Expressed as Head of Water

LaTeX Go Vacuum at the Pump Entrance = ((Depth of the Suction Pipe Entrance-Depth of Submergence of the Pump+(Hydraulic Loss Coefficient*Flow Velocity in the Suction Pipe^2/2*[g])*Specific Weight of the Mixture)/Specific Weight of Water)-Depth of the Suction Pipe Entrance

Specific Weight of Mixture in Suction Pipe

LaTeX Go Specific Weight of the Mixture = (Vacuum at the Pump Entrance+Depth of the Suction Pipe Entrance)*Specific Weight of Water/(Depth of the Suction Pipe Entrance-Depth of Submergence of the Pump+(Hydraulic Loss Coefficient*Flow Velocity in the Suction Pipe^2/2*[g]))

Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis Formula

LaTeX Go

Specific Weight of Dry Sand Grains = ((Specific Weight of the Mixture-Specific Weight of Water)/Concentration of Soil in the Mixture)+Specific Weight of Water
γ_g = ((γ_m-y_w)/C_v)+y_w

What is Suction Dredger?

A Suction Dredger is a stationary dredger normally used for mining sand. The suction pipe of this dredger is inserted into the sand deposit and water jets are used to bring the sand up from the excavation site.

What is the difference between Volumetric and Gravimetric Water Content?

Gravimetric water content is the weight of soil water contained in a unit weight of soil (kg water/kg dry soil).
Likewise, volumetric water content is a volume fraction (m3 water/m3 soil).

How to Calculate Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis?

Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis calculator uses Specific Weight of Dry Sand Grains = ((Specific Weight of the Mixture-Specific Weight of Water)/Concentration of Soil in the Mixture)+Specific Weight of Water to calculate the Specific Weight of Dry Sand Grains, The Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis is defined as the weight per unit volume of a material. Specific Weight of Dry Sand Grains is denoted by γ_g symbol.

How to calculate Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis using this online calculator? To use this online calculator for Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis, enter Specific Weight of the Mixture (γ_m), Specific Weight of Water (y_w) & Concentration of Soil in the Mixture (C_v) and hit the calculate button. Here is how the Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis calculation can be explained with given input values -> 0.01624 = ((10000-9807)/0.03)+9807.

FAQ

What is Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis?

The Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis is defined as the weight per unit volume of a material and is represented as γ_g = ((γ_m-y_w)/C_v)+y_w or Specific Weight of Dry Sand Grains = ((Specific Weight of the Mixture-Specific Weight of Water)/Concentration of Soil in the Mixture)+Specific Weight of Water. Specific Weight of the Mixture refers to the weight per unit volume of a mixture, such as water and suspended sediments or other materials, found in coastal environments, Specific Weight of Water is the weight per unit volume of water & Concentration of Soil in the Mixture refers to the proportion of sediment or soil particles within a water-sediment mixture.

How to calculate Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis?

The Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis is defined as the weight per unit volume of a material is calculated using Specific Weight of Dry Sand Grains = ((Specific Weight of the Mixture-Specific Weight of Water)/Concentration of Soil in the Mixture)+Specific Weight of Water. To calculate Specific Weight of Dry Sand Grains for Concentration of Soil in Volumetric Basis, you need Specific Weight of the Mixture (γ_m), Specific Weight of Water (y_w) & Concentration of Soil in the Mixture (C_v). With our tool, you need to enter the respective value for Specific Weight of the Mixture, Specific Weight of Water & Concentration of Soil in the Mixture and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search