Specific or Intrinsic Permeability when Coefficient of Permeability is Considered Calculator

✖The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.ⓘ Coefficient of Permeability at 20° C [K]			+10% -10%
✖The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity of the Fluid [μ]			+10% -10%
✖The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid.ⓘ Unit Weight of Fluid [γ]			+10% -10%

✖The Intrinsic Permeability or specific permeability is referred as measure of relative ease with which porous medium can transmit fluid under potential gradient and is property of medium alone.ⓘ Specific or Intrinsic Permeability when Coefficient of Permeability is Considered [K_o]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Coefficient of Permeability Formulas PDF PDF Image

Specific or Intrinsic Permeability when Coefficient of Permeability is Considered Solution

STEP 0: Pre-Calculation Summary

Formula Used

Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000)
K_o = (K*μ)/(γ/1000)
This formula uses 4 Variables

Variables Used

Intrinsic Permeability - (Measured in Square Meter) - The Intrinsic Permeability or specific permeability is referred as measure of relative ease with which porous medium can transmit fluid under potential gradient and is property of medium alone.
Coefficient of Permeability at 20° C - (Measured in Meter per Second) - The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids.
Dynamic Viscosity of the Fluid - (Measured in Pascal Second) - The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied.
Unit Weight of Fluid - (Measured in Newton per Cubic Meter) - The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Permeability at 20° C: 6 Centimeter per Second --> 0.06 Meter per Second (Check conversion here)
Dynamic Viscosity of the Fluid: 1.6 Pascal Second --> 1.6 Pascal Second No Conversion Required
Unit Weight of Fluid: 9.807 Kilonewton per Cubic Meter --> 9807 Newton per Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_o = (K*μ)/(γ/1000) --> (0.06*1.6)/(9807/1000)

Evaluating ... ...

K_o = 0.00978892627714898

STEP 3: Convert Result to Output's Unit

0.00978892627714898 Square Meter --> No Conversion Required

FINAL ANSWER

0.00978892627714898 ≈ 0.009789 Square Meter <-- Intrinsic Permeability

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Coefficient of Permeability » Specific or Intrinsic Permeability when Coefficient of Permeability is Considered

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Coefficient of Permeability Calculators

Hagen Poiseuille Flow or Mean Particle Size of Porous Medium Laminar Flow through Conduit

LaTeX Go Mean Particle Size of the Porous Medium = sqrt((Coefficient of Permeability (Hagen-Poiseuille)*Dynamic Viscosity of the Fluid)/(Shape Factor*(Unit Weight of Fluid/1000)))

Dynamic Viscosity of Fluid of Laminar Flow through Conduit or Hagen Poiseuille Flow

LaTeX Go Dynamic Viscosity of the Fluid = (Shape Factor*Mean Particle Size of the Porous Medium^2)*((Unit Weight of Fluid/1000)/Coefficient of Permeability (Hagen-Poiseuille))

Coefficient of Permeability from Analogy of Laminar Flow (Hagen Poiseuille flow)

LaTeX Go Coefficient of Permeability (Hagen-Poiseuille) = Shape Factor*(Mean Particle Size of the Porous Medium^2)*(Unit Weight of Fluid/1000)/Dynamic Viscosity of the Fluid

Unit weight of fluid

LaTeX Go Unit Weight of Fluid = Density of Fluid*Acceleration due to Gravity

Specific or Intrinsic Permeability when Coefficient of Permeability is Considered Formula

LaTeX Go

Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000)
K_o = (K*μ)/(γ/1000)

What is Coefficient of Permeability?

The Coefficient of Permeability describes how easily a liquid will move through a soil. It is also commonly referred to as the hydraulic conductivity of a soil. This factor can be affected by the viscosity, or thickness(fluidity) of a liquid and its density. of a soil describes how easily a liquid will move through a soil. It is also commonly referred to as the hydraulic conductivity of a soil. This factor can be affected by the viscosity, or thickness(fluidity) of a liquid and its density.

How to Calculate Specific or Intrinsic Permeability when Coefficient of Permeability is Considered?

Specific or Intrinsic Permeability when Coefficient of Permeability is Considered calculator uses Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000) to calculate the Intrinsic Permeability, The Specific or Intrinsic Permeability when Coefficient of Permeability is Considered is defined as the permeability in a porous medium that is 100% saturated with a single-phase fluid. Intrinsic Permeability is denoted by K_o symbol.

How to calculate Specific or Intrinsic Permeability when Coefficient of Permeability is Considered using this online calculator? To use this online calculator for Specific or Intrinsic Permeability when Coefficient of Permeability is Considered, enter Coefficient of Permeability at 20° C (K), Dynamic Viscosity of the Fluid (μ) & Unit Weight of Fluid (γ) and hit the calculate button. Here is how the Specific or Intrinsic Permeability when Coefficient of Permeability is Considered calculation can be explained with given input values -> 0.009789 = (0.06*1.6)/(9807/1000).

FAQ

What is Specific or Intrinsic Permeability when Coefficient of Permeability is Considered?

The Specific or Intrinsic Permeability when Coefficient of Permeability is Considered is defined as the permeability in a porous medium that is 100% saturated with a single-phase fluid and is represented as K_o = (K*μ)/(γ/1000) or Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000). The Coefficient of Permeability at 20° C refers to the measure of a porous medium’s ability to allow fluid flow through its voids, The Dynamic Viscosity of the Fluid is referred as measure of its resistance to flow when an external force is applied & The Unit Weight of Fluid is referred as weight per unit volume of a material/fluid.

How to calculate Specific or Intrinsic Permeability when Coefficient of Permeability is Considered?

The Specific or Intrinsic Permeability when Coefficient of Permeability is Considered is defined as the permeability in a porous medium that is 100% saturated with a single-phase fluid is calculated using Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000). To calculate Specific or Intrinsic Permeability when Coefficient of Permeability is Considered, you need Coefficient of Permeability at 20° C (K), Dynamic Viscosity of the Fluid (μ) & Unit Weight of Fluid (γ). With our tool, you need to enter the respective value for Coefficient of Permeability at 20° C, Dynamic Viscosity of the Fluid & Unit Weight of Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Intrinsic Permeability?

In this formula, Intrinsic Permeability uses Coefficient of Permeability at 20° C, Dynamic Viscosity of the Fluid & Unit Weight of Fluid. We can use 2 other way(s) to calculate the same, which is/are as follows -

Intrinsic Permeability = Shape Factor*Mean Particle Size of the Porous Medium^2
Intrinsic Permeability = (Coefficient of Permeability at 20° C*Dynamic Viscosity of the Fluid)/(Unit Weight of Fluid/1000)

Home

FREE PDFs

🔍 Search