Specific heat given convective heat and mass transfer Calculator

✖The heat transfer coefficient is a measure of the heat transfer rate between a solid surface and a fluid per unit area and temperature difference.ⓘ Heat Transfer Coefficient [h_t]			+10% -10%
✖Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid, influenced by convection and diffusion processes.ⓘ Convective Mass Transfer Coefficient [k_L]			+10% -10%
✖Density is the mass of a fluid divided by its volume, it affects how the fluid flows and its ability to transport mass.ⓘ Density [ρ]			+10% -10%
✖Lewis Number is a dimensionless parameter used to characterize the ratio of thermal diffusivity to mass diffusivity in convective mass transfer processes.ⓘ Lewis Number [L_e]			+10% -10%

✖Specific Heat is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius.ⓘ Specific heat given convective heat and mass transfer [Q_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat and Mass Transfer Formula PDF PDF Image

Specific heat given convective heat and mass transfer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Heat = Heat Transfer Coefficient/(Convective Mass Transfer Coefficient*Density*(Lewis Number^0.67))
Q_s = h_t/(k_L*ρ*(L_e^0.67))
This formula uses 5 Variables

Variables Used

Specific Heat - (Measured in Joule per Kilogram per K) - Specific Heat is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius.
Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - The heat transfer coefficient is a measure of the heat transfer rate between a solid surface and a fluid per unit area and temperature difference.
Convective Mass Transfer Coefficient - (Measured in Meter per Second) - Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid, influenced by convection and diffusion processes.
Density - (Measured in Kilogram per Cubic Meter) - Density is the mass of a fluid divided by its volume, it affects how the fluid flows and its ability to transport mass.
Lewis Number - Lewis Number is a dimensionless parameter used to characterize the ratio of thermal diffusivity to mass diffusivity in convective mass transfer processes.

STEP 1: Convert Input(s) to Base Unit

Heat Transfer Coefficient: 13.18859 Watt per Square Meter per Kelvin --> 13.18859 Watt per Square Meter per Kelvin No Conversion Required
Convective Mass Transfer Coefficient: 4E-05 Meter per Second --> 4E-05 Meter per Second No Conversion Required
Density: 999.9 Kilogram per Cubic Meter --> 999.9 Kilogram per Cubic Meter No Conversion Required
Lewis Number: 4.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_s = h_t/(k_L*ρ*(L_e^0.67)) --> 13.18859/(4E-05*999.9*(4.5^0.67))

Evaluating ... ...

Q_s = 120.373093968355

STEP 3: Convert Result to Output's Unit

120.373093968355 Joule per Kilogram per K --> No Conversion Required

FINAL ANSWER

120.373093968355 ≈ 120.3731 Joule per Kilogram per K <-- Specific Heat

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Convective Mass Transfer » Mechanical » Convective Mass Transfer Coefficient » Specific heat given convective heat and mass transfer

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Convective Mass Transfer Coefficient Calculators

Convective Mass Transfer Coefficient through Liquid Gas Interface

LaTeX Go Convective Mass Transfer Coefficient = (Mass Transfer Coefficient of Medium 1*Mass Transfer Coefficient of Medium 2*Henry's Constant)/((Mass Transfer Coefficient of Medium 1*Henry's Constant)+(Mass Transfer Coefficient of Medium 2))

Convective Mass Transfer Coefficient for Simultaneous Heat and Mass Transfer

LaTeX Go Convective Mass Transfer Coefficient = Heat Transfer Coefficient/(Specific Heat*Density of Liquid*(Lewis Number^0.67))

Heat Transfer Coefficient for Simultaneous Heat and Mass Transfer

LaTeX Go Heat Transfer Coefficient = Convective Mass Transfer Coefficient*Density of Liquid*Specific Heat*(Lewis Number^0.67)

Mass Transfer Stanton Number

LaTeX Go Mass Transfer Stanton Number = Convective Mass Transfer Coefficient/Free Stream Velocity

Specific heat given convective heat and mass transfer Formula

LaTeX Go

Specific Heat = Heat Transfer Coefficient/(Convective Mass Transfer Coefficient*Density*(Lewis Number^0.67))
Q_s = h_t/(k_L*ρ*(L_e^0.67))

What is Specific Heat?

Specific heat is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius (or one Kelvin) without a change in phase. It is a physical property that varies among different materials, indicating how much thermal energy a substance can store. A higher specific heat means the substance can absorb more heat without a significant temperature change, while a lower specific heat indicates that less heat is needed to achieve the same temperature increase. Specific heat plays a crucial role in various applications, including thermal management, climate studies, and understanding energy transfer in heating and cooling processes.

How to Calculate Specific heat given convective heat and mass transfer?

Specific heat given convective heat and mass transfer calculator uses Specific Heat = Heat Transfer Coefficient/(Convective Mass Transfer Coefficient*Density*(Lewis Number^0.67)) to calculate the Specific Heat, Specific heat given convective heat and mass transfer formula is defined as a measure of the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius, taking into account the convective heat and mass transfer processes that occur during the heat transfer process. Specific Heat is denoted by Q_s symbol.

How to calculate Specific heat given convective heat and mass transfer using this online calculator? To use this online calculator for Specific heat given convective heat and mass transfer, enter Heat Transfer Coefficient (h_t), Convective Mass Transfer Coefficient (k_L), Density (ρ) & Lewis Number (L_e) and hit the calculate button. Here is how the Specific heat given convective heat and mass transfer calculation can be explained with given input values -> 120.6143 = 13.18859/(4E-05*999.9*(4.5^0.67)).

FAQ

What is Specific heat given convective heat and mass transfer?

Specific heat given convective heat and mass transfer formula is defined as a measure of the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius, taking into account the convective heat and mass transfer processes that occur during the heat transfer process and is represented as Q_s = h_t/(k_L*ρ*(L_e^0.67)) or Specific Heat = Heat Transfer Coefficient/(Convective Mass Transfer Coefficient*Density*(Lewis Number^0.67)). The heat transfer coefficient is a measure of the heat transfer rate between a solid surface and a fluid per unit area and temperature difference, Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid, influenced by convection and diffusion processes, Density is the mass of a fluid divided by its volume, it affects how the fluid flows and its ability to transport mass & Lewis Number is a dimensionless parameter used to characterize the ratio of thermal diffusivity to mass diffusivity in convective mass transfer processes.

How to calculate Specific heat given convective heat and mass transfer?

Specific heat given convective heat and mass transfer formula is defined as a measure of the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius, taking into account the convective heat and mass transfer processes that occur during the heat transfer process is calculated using Specific Heat = Heat Transfer Coefficient/(Convective Mass Transfer Coefficient*Density*(Lewis Number^0.67)). To calculate Specific heat given convective heat and mass transfer, you need Heat Transfer Coefficient (h_t), Convective Mass Transfer Coefficient (k_L), Density (ρ) & Lewis Number (L_e). With our tool, you need to enter the respective value for Heat Transfer Coefficient, Convective Mass Transfer Coefficient, Density & Lewis Number and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search