Specific Gravity of Sludge using Weight Flow Rate Calculator

✖Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.ⓘ Weight Flow Rate of Sludge Feed [W_s]			+10% -10%
✖Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.ⓘ Volume Flow Rate of Sludge Feed [V]			+10% -10%
✖Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.ⓘ Water Density [ρ_water]			+10% -10%
✖Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.ⓘ Percent Solids [%S]			+10% -10%

✖Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.ⓘ Specific Gravity of Sludge using Weight Flow Rate [G_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of a Solid Bowl Centrifuge for Sludge Dewatering Formulas PDF PDF Image

Specific Gravity of Sludge using Weight Flow Rate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60)
G_s = (7.48*W_s)/(V*ρ_water*%S*60)
This formula uses 5 Variables

Variables Used

Specific Gravity of Sludge - Specific Gravity of Sludge is the ratio of the density of sludge to the density of standard compound.
Weight Flow Rate of Sludge Feed - (Measured in Pound per Hour) - Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time.
Volume Flow Rate of Sludge Feed - (Measured in Gallon (US) per Min) - Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time.
Water Density - (Measured in Pound per Cubic Foot) - Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet.
Percent Solids - Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.

STEP 1: Convert Input(s) to Base Unit

Weight Flow Rate of Sludge Feed: 3153.36 Pound per Hour --> 3153.36 Pound per Hour No Conversion Required
Volume Flow Rate of Sludge Feed: 7 Gallon (US) per Min --> 7 Gallon (US) per Min No Conversion Required
Water Density: 62.4 Pound per Cubic Foot --> 62.4 Pound per Cubic Foot No Conversion Required
Percent Solids: 0.45 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

G_s = (7.48*W_s)/(V*ρ_water*%S*60) --> (7.48*3153.36)/(7*62.4*0.45*60)

Evaluating ... ...

G_s = 1.9999943019943

STEP 3: Convert Result to Output's Unit

1.9999943019943 --> No Conversion Required

FINAL ANSWER

1.9999943019943 ≈ 1.999994 <-- Specific Gravity of Sludge

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Solid Bowl Centrifuge for Sludge Dewatering » Weight Flow Rate of Sludge Feed » Specific Gravity of Sludge using Weight Flow Rate

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Weight Flow Rate of Sludge Feed Calculators

Volume Flow Rate of Sludge Feed using Weight Flow Rate

LaTeX Go Volume Flow Rate of Sludge Feed = (7.48*Weight Flow Rate of Sludge Feed)/(Water Density*Specific Gravity of Sludge*Percent Solids*60)

Percent Solids given Weight Flow Rate of Sludge Feed

LaTeX Go Percent Solids = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Specific Gravity of Sludge*60)

Specific Gravity of Sludge using Weight Flow Rate

LaTeX Go Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60)

Weight Flow Rate of Sludge Feed

LaTeX Go Weight Flow Rate of Sludge Feed = (Volume Flow Rate of Sludge Feed*Specific Gravity of Sludge*Water Density*Percent Solids*60)/7.48

Specific Gravity of Sludge using Weight Flow Rate Formula

LaTeX Go

Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60)
G_s = (7.48*W_s)/(V*ρ_water*%S*60)

What is Specific Gravity of Sludge?

The specific gravity of the dry volatile solids is about 1.0 and dry fixed solids about 2.5. The specific gravity of a particular mixture of sludges depends upon the relative fraction of volatile solids. Most wet raw sludges have a specific gravity ranging from about 1.01 to 1.03.

How to Calculate Specific Gravity of Sludge using Weight Flow Rate?

Specific Gravity of Sludge using Weight Flow Rate calculator uses Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60) to calculate the Specific Gravity of Sludge, The Specific Gravity of Sludge using Weight Flow Rate is defined as the ratio of density of sludge to density of reference compound . Specific Gravity of Sludge is denoted by G_s symbol.

How to calculate Specific Gravity of Sludge using Weight Flow Rate using this online calculator? To use this online calculator for Specific Gravity of Sludge using Weight Flow Rate, enter Weight Flow Rate of Sludge Feed (W_s), Volume Flow Rate of Sludge Feed (V), Water Density (ρ_water) & Percent Solids (%S) and hit the calculate button. Here is how the Specific Gravity of Sludge using Weight Flow Rate calculation can be explained with given input values -> 0.149946 = (7.48*0.397316676637457)/(0.000441631374796905*999.552114545232*0.45*60).

FAQ

What is Specific Gravity of Sludge using Weight Flow Rate?

The Specific Gravity of Sludge using Weight Flow Rate is defined as the ratio of density of sludge to density of reference compound and is represented as G_s = (7.48*W_s)/(V*ρ_water*%S*60) or Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60). Weight Flow Rate of Sludge Feed means the weight of sludge flowing in a given time, Volume Flow Rate of Sludge Feed is defined as the volume of sludge flowing in a given time, Water Density is mass per unit of water. The density of water is expressed in pound per cubic feet & Percent Solids refer to the ratio of the solid mass of a material present in a liquid (or semi-liquid) sample. It is expressed in decimal.

How to calculate Specific Gravity of Sludge using Weight Flow Rate?

The Specific Gravity of Sludge using Weight Flow Rate is defined as the ratio of density of sludge to density of reference compound is calculated using Specific Gravity of Sludge = (7.48*Weight Flow Rate of Sludge Feed)/(Volume Flow Rate of Sludge Feed*Water Density*Percent Solids*60). To calculate Specific Gravity of Sludge using Weight Flow Rate, you need Weight Flow Rate of Sludge Feed (W_s), Volume Flow Rate of Sludge Feed (V), Water Density (ρ_water) & Percent Solids (%S). With our tool, you need to enter the respective value for Weight Flow Rate of Sludge Feed, Volume Flow Rate of Sludge Feed, Water Density & Percent Solids and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search