Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity Calculator

✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%
✖The Kinematic Viscosity refers to the ratio of dynamic viscosity to the density of the fluid.ⓘ Kinematic Viscosity [ν]			+10% -10%
✖The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter D [d]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G_f]			+10% -10%

✖Specific Gravity of Particle is the ratio of density of particle to density of standard material.ⓘ Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity [G]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Gravity and Density Formulas PDF PDF Image

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid
G = (18*V_s*ν/[g]*d^2)+G_f
This formula uses 1 Constants, 5 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Specific Gravity of Particle - Specific Gravity of Particle is the ratio of density of particle to density of standard material.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
Kinematic Viscosity - (Measured in Square Meter per Second) - The Kinematic Viscosity refers to the ratio of dynamic viscosity to the density of the fluid.
Diameter D - (Measured in Meter) - The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.

STEP 1: Convert Input(s) to Base Unit

Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required
Kinematic Viscosity: 7.25 Stokes --> 0.000725 Square Meter per Second (Check conversion here)
Diameter D: 0.06 Meter --> 0.06 Meter No Conversion Required
Specific Gravity of Fluid: 14 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

G = (18*V_s*ν/[g]*d^2)+G_f --> (18*1.5*0.000725/[g]*0.06^2)+14

Evaluating ... ...

G = 14.0000071859402

STEP 3: Convert Result to Output's Unit

14.0000071859402 --> No Conversion Required

FINAL ANSWER

14.0000071859402 ≈ 14.00001 <-- Specific Gravity of Particle

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Specific Gravity and Density » Specific Gravity of Particle » Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Specific Gravity of Particle Calculators

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity

LaTeX Go Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid

Specific Gravity of Particle given Settling Velocity calculated in Fahrenheit

LaTeX Go Specific Gravity of Particle = Specific Gravity of Fluid+(Settling Velocity/418*Diameter D^2*((Outside Temperature+10)/60))

Specific Gravity of Particle given Settling Velocity with respect to Specific Gravity

LaTeX Go Specific Gravity of Material = ((3*Drag Coefficient*Settling Velocity^2)/(4*[g]*Diameter D))+1

Specific Gravity of Particle given Settling Velocity at 10 degree Celsius

LaTeX Go Specific Gravity of Particle = Specific Gravity of Fluid+(Settling Velocity/418*Diameter D^2)

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity Formula

LaTeX Go

Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid
G = (18*V_s*ν/[g]*d^2)+G_f

What is Kinematic Viscosity?

Kinematic Viscosity is a measure of a fluid's internal resistance to flow under gravitational forces. It is determined by measuring the time in seconds, required for a fixed volume of fluid to flow a known distance by gravity through a capillary within a calibrated viscometer at a closely controlled temperature.

How to Calculate Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity?

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity calculator uses Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid to calculate the Specific Gravity of Particle, Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity formula is defined as the mass of the particle divided by the solids volume including the volume occupied by internal pores. The particle density is normally less than its material density. Specific Gravity of Particle is denoted by G symbol.

How to calculate Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity using this online calculator? To use this online calculator for Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity, enter Settling Velocity (V_s), Kinematic Viscosity (ν), Diameter D (d) & Specific Gravity of Fluid (G_f) and hit the calculate button. Here is how the Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity calculation can be explained with given input values -> 14.00001 = (18*1.5*0.000725/[g]*0.06^2)+14.

FAQ

What is Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity?

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity formula is defined as the mass of the particle divided by the solids volume including the volume occupied by internal pores. The particle density is normally less than its material density and is represented as G = (18*V_s*ν/[g]*d^2)+G_f or Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid. The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed, The Kinematic Viscosity refers to the ratio of dynamic viscosity to the density of the fluid, The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere & Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.

How to calculate Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity?

Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity formula is defined as the mass of the particle divided by the solids volume including the volume occupied by internal pores. The particle density is normally less than its material density is calculated using Specific Gravity of Particle = (18*Settling Velocity*Kinematic Viscosity/[g]*Diameter D^2)+Specific Gravity of Fluid. To calculate Specific Gravity of Particle given Settling Velocity with respect to Kinematic Viscosity, you need Settling Velocity (V_s), Kinematic Viscosity (ν), Diameter D (d) & Specific Gravity of Fluid (G_f). With our tool, you need to enter the respective value for Settling Velocity, Kinematic Viscosity, Diameter D & Specific Gravity of Fluid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Specific Gravity of Particle?

In this formula, Specific Gravity of Particle uses Settling Velocity, Kinematic Viscosity, Diameter D & Specific Gravity of Fluid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Specific Gravity of Particle = Specific Gravity of Fluid+(Settling Velocity/418*Diameter D^2)
Specific Gravity of Particle = Specific Gravity of Fluid+(Settling Velocity/418*Diameter D^2*((Outside Temperature+10)/60))
Specific Gravity of Particle = Specific Gravity of Fluid+(Settling Velocity*100/418*Diameter of particle^2*(3*Temperature+70))

Home

FREE PDFs

🔍 Search