Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm Calculator

✖Specific Gravity of Particle is the ratio of density of particle to density of standard material.ⓘ Specific Gravity of Particle [G]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%
✖The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter D [d]			+10% -10%
✖Temperature in Fahrenheit is the temperature scale based on one proposed in 1724 by the physicist Daniel Gabriel Fahrenheit. It uses the degree Fahrenheit as the unit.ⓘ Temperature in Fahrenheit [T_F]			+10% -10%

✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm [G_f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Gravity and Density Formulas PDF PDF Image

Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*60/418*Diameter D*(Temperature in Fahrenheit+10))
G_f = G-(V_s*60/418*d*(T_F+10))
This formula uses 5 Variables

Variables Used

Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Specific Gravity of Particle - Specific Gravity of Particle is the ratio of density of particle to density of standard material.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
Diameter D - (Measured in Meter) - The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Temperature in Fahrenheit - (Measured in Kelvin) - Temperature in Fahrenheit is the temperature scale based on one proposed in 1724 by the physicist Daniel Gabriel Fahrenheit. It uses the degree Fahrenheit as the unit.

STEP 1: Convert Input(s) to Base Unit

Specific Gravity of Particle: 16 --> No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required
Diameter D: 0.06 Meter --> 0.06 Meter No Conversion Required
Temperature in Fahrenheit: 11 Fahrenheit --> 261.483326673508 Kelvin (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

G_f = G-(V_s*60/418*d*(T_F+10)) --> 16-(1.5*60/418*0.06*(261.483326673508+10))

Evaluating ... ...

G_f = 12.4927991290982

STEP 3: Convert Result to Output's Unit

12.4927991290982 --> No Conversion Required

FINAL ANSWER

12.4927991290982 ≈ 12.4928 <-- Specific Gravity of Fluid

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Specific Gravity and Density » Specific Gravity of Fluid » Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Specific Gravity of Fluid Calculators

Specific Gravity of Fluid given Settling Velocity with respect to Kinematic Viscosity

LaTeX Go Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*18*Kinematic Viscosity/[g]*Diameter D^2)

Specific Gravity of Fluid given Settling Velocity calculated in Fahrenheit

LaTeX Go Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity/418*Diameter D^2*((Outside Temperature+10)/60))

Specific Gravity of Fluid given Settling Velocity given Celsius

LaTeX Go Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*100/418*Diameter D^2*(3*Temperature+70))

Specific Gravity of Fluid given Settling Velocity at 10 Degree Celsius

LaTeX Go Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity/418*Diameter D^2)

Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm Formula

LaTeX Go

Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*60/418*Diameter D*(Temperature in Fahrenheit+10))
G_f = G-(V_s*60/418*d*(T_F+10))

What is Stokes Law ?

Stokes Law is the basis of the falling-sphere viscometer, in which the fluid is stationary in a vertical glass tube. A sphere of known size and density is allowed to descend through the liquid.

How to Calculate Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm?

Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm calculator uses Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*60/418*Diameter D*(Temperature in Fahrenheit+10)) to calculate the Specific Gravity of Fluid, The Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm formula is defined as the ratio of the density of a substance to the density of the water at a specified temperature. Specific Gravity of Fluid is denoted by G_f symbol.

How to calculate Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm using this online calculator? To use this online calculator for Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm, enter Specific Gravity of Particle (G), Settling Velocity (V_s), Diameter D (d) & Temperature in Fahrenheit (T_F) and hit the calculate button. Here is how the Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm calculation can be explained with given input values -> 12.4928 = 16-(1.5*60/418*0.06*(261.483326673508+10)).

FAQ

What is Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm?

The Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm formula is defined as the ratio of the density of a substance to the density of the water at a specified temperature and is represented as G_f = G-(V_s*60/418*d*(T_F+10)) or Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*60/418*Diameter D*(Temperature in Fahrenheit+10)). Specific Gravity of Particle is the ratio of density of particle to density of standard material, The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed, The Diameter D refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere & Temperature in Fahrenheit is the temperature scale based on one proposed in 1724 by the physicist Daniel Gabriel Fahrenheit. It uses the degree Fahrenheit as the unit.

How to calculate Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm?

The Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm formula is defined as the ratio of the density of a substance to the density of the water at a specified temperature is calculated using Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*60/418*Diameter D*(Temperature in Fahrenheit+10)). To calculate Specific Gravity of Fluid for Temperature given Fahrenheit and Diameter greater than 0.1mm, you need Specific Gravity of Particle (G), Settling Velocity (V_s), Diameter D (d) & Temperature in Fahrenheit (T_F). With our tool, you need to enter the respective value for Specific Gravity of Particle, Settling Velocity, Diameter D & Temperature in Fahrenheit and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Specific Gravity of Fluid?

In this formula, Specific Gravity of Fluid uses Specific Gravity of Particle, Settling Velocity, Diameter D & Temperature in Fahrenheit. We can use 3 other way(s) to calculate the same, which is/are as follows -

Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity*18*Kinematic Viscosity/[g]*Diameter D^2)
Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity/418*Diameter D^2)
Specific Gravity of Fluid = Specific Gravity of Particle-(Settling Velocity/418*Diameter D^2*((Outside Temperature+10)/60))

Home

FREE PDFs

🔍 Search