Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations Calculator

✖Neutral Stress in a soil mass is a force per effective area.stress taken up by the pore water and stress taken up by solid particles.ⓘ Neutral Stress [σ_{Neutralstress}]			+10% -10%
✖Depth of Dam is the distance from the top or surface to the bottom of something.ⓘ Depth of Dam [D]			+10% -10%
✖Height of Dam is the distance between the lowest and highest points of a person/ shape/ object standing upright.ⓘ Height of Dam [h]			+10% -10%
✖Minimum Safe Length of Travel path is the measurement or extent of something from end to end.ⓘ Minimum Safe Length of Travel path [L_n]			+10% -10%

✖Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.ⓘ Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations [W]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Buttress Dams Formulas PDF PDF Image

Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Weight of Water in KN per cubic meter = Neutral Stress/(Depth of Dam*(1+Height of Dam/Minimum Safe Length of Travel path))
W = σ_{Neutralstress}/(D*(1+h/L_n))
This formula uses 5 Variables

Variables Used

Specific Weight of Water in KN per cubic meter - (Measured in Newton per Cubic Meter) - Specific Weight of Water in KN per cubic meter is the weight per unit volume of water.
Neutral Stress - (Measured in Pascal) - Neutral Stress in a soil mass is a force per effective area.stress taken up by the pore water and stress taken up by solid particles.
Depth of Dam - (Measured in Meter) - Depth of Dam is the distance from the top or surface to the bottom of something.
Height of Dam - (Measured in Meter) - Height of Dam is the distance between the lowest and highest points of a person/ shape/ object standing upright.
Minimum Safe Length of Travel path - (Measured in Meter) - Minimum Safe Length of Travel path is the measurement or extent of something from end to end.

STEP 1: Convert Input(s) to Base Unit

Neutral Stress: 187.7 Kilonewton per Square Meter --> 187700 Pascal (Check conversion here)
Depth of Dam: 3 Meter --> 3 Meter No Conversion Required
Height of Dam: 15.6 Meter --> 15.6 Meter No Conversion Required
Minimum Safe Length of Travel path: 2.9 Meter --> 2.9 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W = σ_{Neutralstress}/(D*(1+h/L_n)) --> 187700/(3*(1+15.6/2.9))

Evaluating ... ...

W = 9807.74774774775

STEP 3: Convert Result to Output's Unit

9807.74774774775 Newton per Cubic Meter -->9.80774774774775 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

9.80774774774775 ≈ 9.807748 Kilonewton per Cubic Meter <-- Specific Weight of Water in KN per cubic meter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Buttress Dams » Dams on Soft or Porous Foundations » Dams on Soft or Porous Foundations by Darcy’s law » Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Dams on Soft or Porous Foundations by Darcy’s law Calculators

Velocity given Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Maximum Velocity = Material Coefficient*Head under Flow/Length of Pipe

Length of Conduit after using Area of Pipe in Discharge

LaTeX Go Length of Pipe = Material Coefficient*Head under Flow/Maximum Velocity

Minimum Safe Length of Travel path under Dams on Soft or Porous Foundations

LaTeX Go Minimum Safe Length of Travel path = New Material Coefficient C2*Head under Flow

New Material Coefficient C2 for Dams on Soft or Porous Foundations

LaTeX Go New Material Coefficient C2 = Material Coefficient/Maximum Velocity

Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations Formula

LaTeX Go

Specific Weight of Water in KN per cubic meter = Neutral Stress/(Depth of Dam*(1+Height of Dam/Minimum Safe Length of Travel path))
W = σ_{Neutralstress}/(D*(1+h/L_n))

What is a buttress dam ?

A buttress dam or hollow dam is a dam with a solid, water-tight upstream side that is supported at intervals on the downstream side by a series of buttresses or supports

How to Calculate Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations?

Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations calculator uses Specific Weight of Water in KN per cubic meter = Neutral Stress/(Depth of Dam*(1+Height of Dam/Minimum Safe Length of Travel path)) to calculate the Specific Weight of Water in KN per cubic meter, Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations formula is defined as weight of water divided by volume of water. Specific Weight of Water in KN per cubic meter is denoted by W symbol.

How to calculate Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations using this online calculator? To use this online calculator for Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations, enter Neutral Stress (σ_{Neutralstress}), Depth of Dam (D), Height of Dam (h) & Minimum Safe Length of Travel path (L_n) and hit the calculate button. Here is how the Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations calculation can be explained with given input values -> 0.007843 = 187700/(3*(1+15.6/2.9)).

FAQ

What is Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations?

Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations formula is defined as weight of water divided by volume of water and is represented as W = σ_{Neutralstress}/(D*(1+h/L_n)) or Specific Weight of Water in KN per cubic meter = Neutral Stress/(Depth of Dam*(1+Height of Dam/Minimum Safe Length of Travel path)). Neutral Stress in a soil mass is a force per effective area.stress taken up by the pore water and stress taken up by solid particles, Depth of Dam is the distance from the top or surface to the bottom of something, Height of Dam is the distance between the lowest and highest points of a person/ shape/ object standing upright & Minimum Safe Length of Travel path is the measurement or extent of something from end to end.

How to calculate Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations?

Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations formula is defined as weight of water divided by volume of water is calculated using Specific Weight of Water in KN per cubic meter = Neutral Stress/(Depth of Dam*(1+Height of Dam/Minimum Safe Length of Travel path)). To calculate Specific Gravity of Water given Neutral stress per unit area for Dams on Soft Foundations, you need Neutral Stress (σ_{Neutralstress}), Depth of Dam (D), Height of Dam (h) & Minimum Safe Length of Travel path (L_n). With our tool, you need to enter the respective value for Neutral Stress, Depth of Dam, Height of Dam & Minimum Safe Length of Travel path and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search