Specific Consumption Solution

STEP 0: Pre-Calculation Summary
Formula Used
Specific Consumption = (2*Input Power)/Candle Power
S.C. = (2*Pin)/CP
This formula uses 3 Variables
Variables Used
Specific Consumption - Specific Consumption is defined as the ratio of electric power input to its average candle power.
Input Power - (Measured in Watt) - Input power refers to the amount of electrical power consumed by a device or system. It represents the energy input required to operate the equipment and is typically measured in watts or kilowatts.
Candle Power - (Measured in Candela) - Candle power is an older term used to describe the intensity of light emitted by a source, but it has largely been superseded by the SI unit candela for modern illumination measurements.
STEP 1: Convert Input(s) to Base Unit
Input Power: 290 Watt --> 290 Watt No Conversion Required
Candle Power: 1.55 Candela --> 1.55 Candela No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
S.C. = (2*Pin)/CP --> (2*290)/1.55
Evaluating ... ...
S.C. = 374.193548387097
STEP 3: Convert Result to Output's Unit
374.193548387097 --> No Conversion Required
FINAL ANSWER
374.193548387097 374.1935 <-- Specific Consumption
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Prahalad Singh
Jaipur Engineering College and Research Centre (JECRC), Jaipur
Prahalad Singh has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Advanced Illumination Calculators

Beer-Lambert Law
​ LaTeX ​ Go Intensity of Transmitted Light = Intensity of Light Entering the Material*exp(-Absorption per Concentration Coefficient*Concentration of Absorption Material*Path Length)
Utilization Factor of Electrical Energy
​ LaTeX ​ Go Utilization Factor = Lumen Reaching Working Plane/Lumen Emitting from Source
Specific Consumption
​ LaTeX ​ Go Specific Consumption = (2*Input Power)/Candle Power
Luminous Intensity
​ LaTeX ​ Go Luminous Intensity = Lumen/Solid Angle

Specific Consumption Formula

​LaTeX ​Go
Specific Consumption = (2*Input Power)/Candle Power
S.C. = (2*Pin)/CP

What is Glare?

Glare means the brightness within the field of vision of such a character
as to cause annoyance, discomfort, interference with vision or eye fatigue.

How to Calculate Specific Consumption?

Specific Consumption calculator uses Specific Consumption = (2*Input Power)/Candle Power to calculate the Specific Consumption, The Specific Consumption formula is defined as the ratio of electric power input to its average candle power. Specific Consumption is denoted by S.C. symbol.

How to calculate Specific Consumption using this online calculator? To use this online calculator for Specific Consumption, enter Input Power (Pin) & Candle Power (CP) and hit the calculate button. Here is how the Specific Consumption calculation can be explained with given input values -> 374.1935 = (2*290)/1.55.

FAQ

What is Specific Consumption?
The Specific Consumption formula is defined as the ratio of electric power input to its average candle power and is represented as S.C. = (2*Pin)/CP or Specific Consumption = (2*Input Power)/Candle Power. Input power refers to the amount of electrical power consumed by a device or system. It represents the energy input required to operate the equipment and is typically measured in watts or kilowatts & Candle power is an older term used to describe the intensity of light emitted by a source, but it has largely been superseded by the SI unit candela for modern illumination measurements.
How to calculate Specific Consumption?
The Specific Consumption formula is defined as the ratio of electric power input to its average candle power is calculated using Specific Consumption = (2*Input Power)/Candle Power. To calculate Specific Consumption, you need Input Power (Pin) & Candle Power (CP). With our tool, you need to enter the respective value for Input Power & Candle Power and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!