Specific Capacity of Open Well given Constant Depending upon Soil at Base Calculator

✖Constant Dependent on Base Soil is the constant depending on the soil at the base of the well.ⓘ Constant Dependent on Base Soil [K_b]			+10% -10%
✖Cross-Sectional Area of Well is the the surface area of the interior opening of the well.ⓘ Cross-Sectional Area of Well [A_csw]			+10% -10%

✖Specific Capacity is capacity of an open well.ⓘ Specific Capacity of Open Well given Constant Depending upon Soil at Base [K_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Constant Level Pumping Test Formulas PDF PDF Image

Specific Capacity of Open Well given Constant Depending upon Soil at Base Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well
K_a = K_b/A_csw
This formula uses 3 Variables

Variables Used

Specific Capacity - (Measured in Meter per Second) - Specific Capacity is capacity of an open well.
Constant Dependent on Base Soil - (Measured in Cubic Meter per Second) - Constant Dependent on Base Soil is the constant depending on the soil at the base of the well.
Cross-Sectional Area of Well - (Measured in Square Meter) - Cross-Sectional Area of Well is the the surface area of the interior opening of the well.

STEP 1: Convert Input(s) to Base Unit

Constant Dependent on Base Soil: 4.99 Cubic Meter per Hour --> 0.00138611111111111 Cubic Meter per Second (Check conversion here)
Cross-Sectional Area of Well: 13 Square Meter --> 13 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_a = K_b/A_csw --> 0.00138611111111111/13

Evaluating ... ...

K_a = 0.000106623931623932

STEP 3: Convert Result to Output's Unit

0.000106623931623932 Meter per Second -->0.383846153846154 Meter per Hour (Check conversion here)

FINAL ANSWER

0.383846153846154 ≈ 0.383846 Meter per Hour <-- Specific Capacity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Constant Level Pumping Test » Specific Capacity » Specific Capacity of Open Well given Constant Depending upon Soil at Base

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specific Capacity Calculators

Specific Capacity of Open Well

LaTeX Go Specific Capacity = (1/Time)*log((Depression Head/Depression Head in Well 2),e)

Specific Capacity of Open Well with Base 10

LaTeX Go Specific Capacity = (2.303/Time)*log((Depression Head/Depression Head in Well 2),10)

Specific Capacity given Discharge from Well

LaTeX Go Specific Capacity in SI unit = Discharge in Well/(Cross-Sectional Area of Well*Constant Depression Head)

Specific Capacity of Open Well given Constant Depending upon Soil at Base

LaTeX Go Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well

Specific Capacity of Open Well given Constant Depending upon Soil at Base Formula

LaTeX Go

Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well
K_a = K_b/A_csw

What is Specific Capacity?

Specific Capacity refers to the efficiency of a well in producing water. It is a measure of how much water (in volume) a well can yield per unit of drawdown (or drop in water level) over a specific period of time. The specific capacity is typically expressed in units such as gallons per minute per foot (gpm/ft) or liters per second per meter (L/s/m).

How to Calculate Specific Capacity of Open Well given Constant Depending upon Soil at Base?

Specific Capacity of Open Well given Constant Depending upon Soil at Base calculator uses Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well to calculate the Specific Capacity, The Specific Capacity of Open Well given Constant Depending upon Soil at Base formula is defined as volume of water released from storage by unconfined aquifer per unit surface area of aquifer per unit decline of water table. Specific Capacity is denoted by K_a symbol.

How to calculate Specific Capacity of Open Well given Constant Depending upon Soil at Base using this online calculator? To use this online calculator for Specific Capacity of Open Well given Constant Depending upon Soil at Base, enter Constant Dependent on Base Soil (K_b) & Cross-Sectional Area of Well (A_csw) and hit the calculate button. Here is how the Specific Capacity of Open Well given Constant Depending upon Soil at Base calculation can be explained with given input values -> 1384.615 = 0.00138611111111111/13.

FAQ

What is Specific Capacity of Open Well given Constant Depending upon Soil at Base?

The Specific Capacity of Open Well given Constant Depending upon Soil at Base formula is defined as volume of water released from storage by unconfined aquifer per unit surface area of aquifer per unit decline of water table and is represented as K_a = K_b/A_csw or Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well. Constant Dependent on Base Soil is the constant depending on the soil at the base of the well & Cross-Sectional Area of Well is the the surface area of the interior opening of the well.

How to calculate Specific Capacity of Open Well given Constant Depending upon Soil at Base?

The Specific Capacity of Open Well given Constant Depending upon Soil at Base formula is defined as volume of water released from storage by unconfined aquifer per unit surface area of aquifer per unit decline of water table is calculated using Specific Capacity = Constant Dependent on Base Soil/Cross-Sectional Area of Well. To calculate Specific Capacity of Open Well given Constant Depending upon Soil at Base, you need Constant Dependent on Base Soil (K_b) & Cross-Sectional Area of Well (A_csw). With our tool, you need to enter the respective value for Constant Dependent on Base Soil & Cross-Sectional Area of Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Specific Capacity?

In this formula, Specific Capacity uses Constant Dependent on Base Soil & Cross-Sectional Area of Well. We can use 2 other way(s) to calculate the same, which is/are as follows -

Specific Capacity = (1/Time)*log((Depression Head/Depression Head in Well 2),e)
Specific Capacity = (2.303/Time)*log((Depression Head/Depression Head in Well 2),10)

Home

FREE PDFs

🔍 Search