Specific Capacity given Aquifer Loss Calculator

✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%
✖The Head Loss in Well refers to the difference between the head of the aquifer immediately outside and in the well a head inside because of all these losses.ⓘ Head Loss in Well [CQⁿ]			+10% -10%
✖The Aquifer Loss refers to the reduction in the volume of water stored in an aquifer.ⓘ Aquifer Loss [BQ]			+10% -10%

✖The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.ⓘ Specific Capacity given Aquifer Loss [S_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Characteristic Well Losses Formulas PDF PDF Image

Specific Capacity given Aquifer Loss Solution

STEP 0: Pre-Calculation Summary

Formula Used

Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss))
S_c = (Q/(CQⁿ+BQ))
This formula uses 4 Variables

Variables Used

Specific Capacity - (Measured in Square Meter per Second) - The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Head Loss in Well - (Measured in Meter) - The Head Loss in Well refers to the difference between the head of the aquifer immediately outside and in the well a head inside because of all these losses.
Aquifer Loss - (Measured in Meter) - The Aquifer Loss refers to the reduction in the volume of water stored in an aquifer.

STEP 1: Convert Input(s) to Base Unit

Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Head Loss in Well: 0.52 Meter --> 0.52 Meter No Conversion Required
Aquifer Loss: 27.6 Meter --> 27.6 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_c = (Q/(CQⁿ+BQ)) --> (1.01/(0.52+27.6))

Evaluating ... ...

S_c = 0.0359174964438122

STEP 3: Convert Result to Output's Unit

0.0359174964438122 Square Meter per Second --> No Conversion Required

FINAL ANSWER

0.0359174964438122 ≈ 0.035917 Square Meter per Second <-- Specific Capacity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Characteristic Well Losses » Specific Capacity of Well » Specific Capacity given Aquifer Loss

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specific Capacity of Well Calculators

Specific Capacity given Aquifer Loss

LaTeX Go Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss))

Drawdown given Specific Capacity of Well

LaTeX Go Total Drawdown = Discharge/Specific Capacity

Discharge given Specific Capacity

LaTeX Go Discharge = Specific Capacity*Total Drawdown

Specific Capacity given Drawdown

LaTeX Go Specific Capacity = Discharge/Total Drawdown

Specific Capacity given Aquifer Loss Formula

LaTeX Go

Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss))
S_c = (Q/(CQⁿ+BQ))

What is Specific Capacity?

Specific capacity is a quantity that which a water well can produce per unit of drawdown. It is normally obtained from a step drawdown test.

How to Calculate Specific Capacity given Aquifer Loss?

Specific Capacity given Aquifer Loss calculator uses Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss)) to calculate the Specific Capacity, The Specific Capacity given Aquifer Loss formula is defined as the measure of the ability of an aquifer to transmit water under certain conditions, taking into account the well loss and aquifer loss components, which are critical in understanding groundwater flow and managing water resources effectively. Specific Capacity is denoted by S_c symbol.

How to calculate Specific Capacity given Aquifer Loss using this online calculator? To use this online calculator for Specific Capacity given Aquifer Loss, enter Discharge (Q), Head Loss in Well (CQⁿ) & Aquifer Loss (BQ) and hit the calculate button. Here is how the Specific Capacity given Aquifer Loss calculation can be explained with given input values -> 0.036528 = (1.01/(0.52+27.6)).

FAQ

What is Specific Capacity given Aquifer Loss?

The Specific Capacity given Aquifer Loss formula is defined as the measure of the ability of an aquifer to transmit water under certain conditions, taking into account the well loss and aquifer loss components, which are critical in understanding groundwater flow and managing water resources effectively and is represented as S_c = (Q/(CQⁿ+BQ)) or Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss)). Discharge is the rate of flow of a liquid, The Head Loss in Well refers to the difference between the head of the aquifer immediately outside and in the well a head inside because of all these losses & The Aquifer Loss refers to the reduction in the volume of water stored in an aquifer.

How to calculate Specific Capacity given Aquifer Loss?

The Specific Capacity given Aquifer Loss formula is defined as the measure of the ability of an aquifer to transmit water under certain conditions, taking into account the well loss and aquifer loss components, which are critical in understanding groundwater flow and managing water resources effectively is calculated using Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss)). To calculate Specific Capacity given Aquifer Loss, you need Discharge (Q), Head Loss in Well (CQⁿ) & Aquifer Loss (BQ). With our tool, you need to enter the respective value for Discharge, Head Loss in Well & Aquifer Loss and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Specific Capacity?

In this formula, Specific Capacity uses Discharge, Head Loss in Well & Aquifer Loss. We can use 1 other way(s) to calculate the same, which is/are as follows -

Specific Capacity = Discharge/Total Drawdown

Home

FREE PDFs

🔍 Search