Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation Calculator

✖Cumulative Infiltration Capacity is calculated by subtracting the cumulative runoff from the cumulative rainfall.ⓘ Cumulative Infiltration Capacity [F_p]			+10% -10%
✖Hydraulic Conductivity depends on the size and arrangement of the water-transmitting openings and on the dynamic characteristics of the fluid.ⓘ Hydraulic Conductivity [k]			+10% -10%
✖Time is an ongoing and continuous sequence of events that occur in succession, from the past through the present, and to the future. Here it is for rainfall.ⓘ Time [t]			+10% -10%

✖Sorptivity is a function of soil suction potential and measures the capacity of the medium to absorb or desorb liquid by capillarity.ⓘ Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Abstractions from Precipitation Formulas PDF PDF Image

Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2))
s = (F_p-k*t)/(t^(1/2))
This formula uses 4 Variables

Variables Used

Sorptivity - Sorptivity is a function of soil suction potential and measures the capacity of the medium to absorb or desorb liquid by capillarity.
Cumulative Infiltration Capacity - (Measured in Centimeter per Hour) - Cumulative Infiltration Capacity is calculated by subtracting the cumulative runoff from the cumulative rainfall.
Hydraulic Conductivity - (Measured in Centimeter per Hour) - Hydraulic Conductivity depends on the size and arrangement of the water-transmitting openings and on the dynamic characteristics of the fluid.
Time - (Measured in Hour) - Time is an ongoing and continuous sequence of events that occur in succession, from the past through the present, and to the future. Here it is for rainfall.

STEP 1: Convert Input(s) to Base Unit

Cumulative Infiltration Capacity: 20 Centimeter per Hour --> 20 Centimeter per Hour No Conversion Required
Hydraulic Conductivity: 2.93 Centimeter per Hour --> 2.93 Centimeter per Hour No Conversion Required
Time: 2 Hour --> 2 Hour No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = (F_p-k*t)/(t^(1/2)) --> (20-2.93*2)/(2^(1/2))

Evaluating ... ...

s = 9.99848988597778

STEP 3: Convert Result to Output's Unit

9.99848988597778 --> No Conversion Required

FINAL ANSWER

9.99848988597778 ≈ 9.99849 <-- Sorptivity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Abstractions from Precipitation » Modelling Infiltration Capacity » Infiltration Capacity Equation » Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Infiltration Capacity Equation Calculators

Infiltration rate by Horton's equation

LaTeX Go Infiltration Capacity at Any Time t = Final Steady State Infiltration Capacity+(Initial Infiltration Capacity-Final Steady State Infiltration Capacity)*exp(-(Decay Coefficient*Time))

Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation

LaTeX Go Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2))

Philip's Equation

LaTeX Go Cumulative Infiltration Capacity = Sorptivity*Time^(1/2)+Hydraulic Conductivity*Time

Kostiakov Equation

LaTeX Go Cumulative Infiltration Capacity = Local Parameter a*Time^Local Parameter b

Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation Formula

LaTeX Go

Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2))
s = (F_p-k*t)/(t^(1/2))

What is Infiltration Capacity?

The Infiltration Capacity is defined as the maximum rate of infiltration. It is most often measured in meters per day but can also be measured in other units of distance over time if necessary. The infiltration capacity decreases as the soil moisture content of soils surface layers increases

How to Calculate Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation?

Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation calculator uses Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2)) to calculate the Sorptivity, The Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation formula is defined as a measure of the capacity of the medium to absorb or desorb liquid by capillarity. Sorptivity is denoted by s symbol.

How to calculate Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation using this online calculator? To use this online calculator for Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation, enter Cumulative Infiltration Capacity (F_p), Hydraulic Conductivity (k) & Time (t) and hit the calculate button. Here is how the Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation calculation can be explained with given input values -> 9.99849 = (5.55555555555556E-05-8.13888888888889E-06*7200)/(7200^(1/2)).

FAQ

What is Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation?

The Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation formula is defined as a measure of the capacity of the medium to absorb or desorb liquid by capillarity and is represented as s = (F_p-k*t)/(t^(1/2)) or Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2)). Cumulative Infiltration Capacity is calculated by subtracting the cumulative runoff from the cumulative rainfall, Hydraulic Conductivity depends on the size and arrangement of the water-transmitting openings and on the dynamic characteristics of the fluid & Time is an ongoing and continuous sequence of events that occur in succession, from the past through the present, and to the future. Here it is for rainfall.

How to calculate Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation?

The Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation formula is defined as a measure of the capacity of the medium to absorb or desorb liquid by capillarity is calculated using Sorptivity = (Cumulative Infiltration Capacity-Hydraulic Conductivity*Time)/(Time^(1/2)). To calculate Sorptivity for Cumulative Infiltration Capacity is from Philip's Equation, you need Cumulative Infiltration Capacity (F_p), Hydraulic Conductivity (k) & Time (t). With our tool, you need to enter the respective value for Cumulative Infiltration Capacity, Hydraulic Conductivity & Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Sorptivity?

In this formula, Sorptivity uses Cumulative Infiltration Capacity, Hydraulic Conductivity & Time. We can use 1 other way(s) to calculate the same, which is/are as follows -

Sorptivity = ((Infiltration Capacity at Any Time t-Hydraulic Conductivity)*2)/(Time^(-1/2))

Home

FREE PDFs

🔍 Search