Solute Underflow Entering Column based on Fractional Solute Discharge Calculator

✖The Amount of Solute in Underflow leaving column is the amount of the solute leaving in the Underflow of the continuous leaching operation.ⓘ Amount of Solute in Underflow Leaving Column [S_N]			+10% -10%
✖The Fractional Solute Discharge is the ratio of the Solute exiting the stage of continuous leaching to that entering the stage.ⓘ Fractional Solute Discharge [f]			+10% -10%

✖The Amount of Solute in Underflow entering column is the amount of the solute entering in the Underflow of the continuous leaching operation.ⓘ Solute Underflow Entering Column based on Fractional Solute Discharge [S₀]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Solid Liquid Extraction Formula PDF PDF Image

Solute Underflow Entering Column based on Fractional Solute Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/Fractional Solute Discharge
S₀ = S_N/f
This formula uses 3 Variables

Variables Used

Amount of Solute in Underflow Entering Column - (Measured in Kilogram per Second) - The Amount of Solute in Underflow entering column is the amount of the solute entering in the Underflow of the continuous leaching operation.
Amount of Solute in Underflow Leaving Column - (Measured in Kilogram per Second) - The Amount of Solute in Underflow leaving column is the amount of the solute leaving in the Underflow of the continuous leaching operation.
Fractional Solute Discharge - The Fractional Solute Discharge is the ratio of the Solute exiting the stage of continuous leaching to that entering the stage.

STEP 1: Convert Input(s) to Base Unit

Amount of Solute in Underflow Leaving Column: 2 Kilogram per Second --> 2 Kilogram per Second No Conversion Required
Fractional Solute Discharge: 0.2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S₀ = S_N/f --> 2/0.2

Evaluating ... ...

S₀ = 10

STEP 3: Convert Result to Output's Unit

10 Kilogram per Second --> No Conversion Required

FINAL ANSWER

10 Kilogram per Second <-- Amount of Solute in Underflow Entering Column

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Solid Liquid Extraction » Counter Current Continuous Leaching for Constant Overflow (Pure Solvent) » Solute Underflow Entering Column based on Fractional Solute Discharge

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Counter Current Continuous Leaching for Constant Overflow (Pure Solvent) Calculators

Ratio of Solvent Discharged in Underflow to Overflow

LaTeX Go Ratio of Discharge in Overflow to Underflow = (Amount of Solution Discharge in Overflow-Amount of Solute Discharge in Overflow)/(Amount of Solution Discharge in Underflow-Amount of Solute Discharge in Underflow)

Ratio of Solution Discharged in Overflow to Underflow

LaTeX Go Ratio of Discharge in Overflow to Underflow = Amount of Solution Discharge in Overflow/Amount of Solution Discharge in Underflow

Solute Discharged in Overflow based on Ratio of Overflow to Underflow

LaTeX Go Amount of Solute Discharge in Overflow = Ratio of Discharge in Overflow to Underflow*Amount of Solute Discharge in Underflow

Ratio of Solute Discharged in Underflow to Overflow

LaTeX Go Ratio of Discharge in Overflow to Underflow = Amount of Solute Discharge in Overflow/Amount of Solute Discharge in Underflow

Solute Underflow Entering Column based on Fractional Solute Discharge Formula

LaTeX Go

Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/Fractional Solute Discharge
S₀ = S_N/f

What is Leaching Operation?

Leaching is a mass transfer operation in which we have a solid material which either contains components which are valuable to us or components which are considered an impurity of the solid, no matter what the case, such components are called solute. We take a liquid which is called a solvent and contact it intimately with the solid in order to extract the solute from the solid and bring it into the liquid thus effecting a separation. Leaching is a solid-liquid extraction process. The process of leaching generally concerns with processes where the solid is inert and contains soluble solute which is extracted from the inert solid with the help of chemical reaction; for example, the leaching of valuable metals from waste materials by using sulphuric acid. The process of leaching is extremely common in metallurgical industries.

What are the Factors affecting Solvent Selection in Leaching Process?

Solubility of the target substance: The solvent should be able to dissolve the target substance to an acceptable extent. Chemical compatibility: The solvent should be chemically compatible with the target substance and not cause any adverse chemical reactions. Toxicity: The solvent should be safe for the environment and not pose any health risks to workers handling it. Cost: The cost of the solvent should be economically viable and not be too expensive. Recovery: The solvent should be recoverable and reusable. Boiling point: The boiling point of the solvent should be appropriate for the temperature range used in the process. Specific gravity: The specific gravity of the solvent should be suitable for the separation process. Viscosity: The viscosity of the solvent should be appropriate for efficient mixing and separation. Regulatory compliance: The solvent should comply with the relevant environmental regulations.

How to Calculate Solute Underflow Entering Column based on Fractional Solute Discharge?

Solute Underflow Entering Column based on Fractional Solute Discharge calculator uses Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/Fractional Solute Discharge to calculate the Amount of Solute in Underflow Entering Column, The Solute Underflow Entering Column based on Fractional Solute Discharge formula is defined as the amount of solute in underflow entering the column calculated from the fraction ratio of solute discharge. Amount of Solute in Underflow Entering Column is denoted by S₀ symbol.

How to calculate Solute Underflow Entering Column based on Fractional Solute Discharge using this online calculator? To use this online calculator for Solute Underflow Entering Column based on Fractional Solute Discharge, enter Amount of Solute in Underflow Leaving Column (S_N) & Fractional Solute Discharge (f) and hit the calculate button. Here is how the Solute Underflow Entering Column based on Fractional Solute Discharge calculation can be explained with given input values -> 10 = 2/0.2.

FAQ

What is Solute Underflow Entering Column based on Fractional Solute Discharge?

The Solute Underflow Entering Column based on Fractional Solute Discharge formula is defined as the amount of solute in underflow entering the column calculated from the fraction ratio of solute discharge and is represented as S₀ = S_N/f or Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/Fractional Solute Discharge. The Amount of Solute in Underflow leaving column is the amount of the solute leaving in the Underflow of the continuous leaching operation & The Fractional Solute Discharge is the ratio of the Solute exiting the stage of continuous leaching to that entering the stage.

How to calculate Solute Underflow Entering Column based on Fractional Solute Discharge?

The Solute Underflow Entering Column based on Fractional Solute Discharge formula is defined as the amount of solute in underflow entering the column calculated from the fraction ratio of solute discharge is calculated using Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/Fractional Solute Discharge. To calculate Solute Underflow Entering Column based on Fractional Solute Discharge, you need Amount of Solute in Underflow Leaving Column (S_N) & Fractional Solute Discharge (f). With our tool, you need to enter the respective value for Amount of Solute in Underflow Leaving Column & Fractional Solute Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Amount of Solute in Underflow Entering Column?

In this formula, Amount of Solute in Underflow Entering Column uses Amount of Solute in Underflow Leaving Column & Fractional Solute Discharge. We can use 2 other way(s) to calculate the same, which is/are as follows -

Amount of Solute in Underflow Entering Column = Amount of Solute in Underflow Leaving Column/(1-Recovery of Solute in Leaching Column)
Amount of Solute in Underflow Entering Column = (Amount of Solute in Underflow Leaving Column*((Ratio of Discharge in Overflow to Underflow^(Number of Equilibrium Stages in Leaching+1))-1))/(Ratio of Discharge in Overflow to Underflow-1)

Home

FREE PDFs

🔍 Search