Solubility Parameter Given Surface Tension Calculator

✖Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.ⓘ Surface Tension of Fluid [γ]			+10% -10%
✖Molar Volume is the volume occupied by one mole of a real gas at standard temperature and pressure.ⓘ Molar Volume [V_m]			+10% -10%

✖Solubility Parameter is a numerical value that indicates the relative solvency behavior of a specific solvent.ⓘ Solubility Parameter Given Surface Tension [δ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Capillarity and Surface Forces in Liquids (Curved Surfaces) Formula PDF PDF Image

Solubility Parameter Given Surface Tension Solution

STEP 0: Pre-Calculation Summary

Formula Used

Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43)
δ = 4.1*(γ/(V_m)^(1/3))^(0.43)
This formula uses 3 Variables

Variables Used

Solubility Parameter - (Measured in Sqrt(Joule per Cubic Meter)) - Solubility Parameter is a numerical value that indicates the relative solvency behavior of a specific solvent.
Surface Tension of Fluid - (Measured in Newton per Meter) - Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces.
Molar Volume - (Measured in Cubic Meter per Mole) - Molar Volume is the volume occupied by one mole of a real gas at standard temperature and pressure.

STEP 1: Convert Input(s) to Base Unit

Surface Tension of Fluid: 73 Millinewton per Meter --> 0.073 Newton per Meter (Check conversion here)
Molar Volume: 22.4 Cubic Meter per Mole --> 22.4 Cubic Meter per Mole No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

δ = 4.1*(γ/(V_m)^(1/3))^(0.43) --> 4.1*(0.073/(22.4)^(1/3))^(0.43)

Evaluating ... ...

δ = 0.852073654173937

STEP 3: Convert Result to Output's Unit

0.852073654173937 Sqrt(Joule per Cubic Meter) --> No Conversion Required

FINAL ANSWER

0.852073654173937 ≈ 0.852074 Sqrt(Joule per Cubic Meter) <-- Solubility Parameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Capillarity and Surface Forces in Liquids (Curved Surfaces) » Surface Tension » Solubility Parameter Given Surface Tension

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Surface Tension Calculators

Surface Tension of Sea Water

LaTeX Go Surface Tension of Sea Water = Surface Tension of Pure Water*(1+(3.766*10^(-4)*Reference Salinity)+(2.347*10^(-6)*Reference Salinity*Temperature in Degree Celsius))

Surface Tension of Pure Water

LaTeX Go Surface Tension of Pure Water = 235.8*(1-(Temperature/Critical Temperature))^(1.256)*(1-(0.625*(1-(Temperature/Critical Temperature))))

Surface Tension Given Gibbs Free Energy

LaTeX Go Surface Tension of Fluid = Gibbs Free Energy/Area of Surface

Surface Tension of Methane+Hexane System

LaTeX Go Surface Tension of Methane+Hexane System = 0.64+(17.85*Concentration of Hexane)

Solubility Parameter Given Surface Tension Formula

LaTeX Go

Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43)
δ = 4.1*(γ/(V_m)^(1/3))^(0.43)

What do you mean by Surface Tension?

Surface tension is the tendency of liquid surfaces at rest to shrink into the minimum surface area possible. Surface tension is what allows objects with a higher density than water such as razor blades and insects (e.g. water striders) to float on a water surface without becoming even partly submerged. Surface tension has the dimension of force per unit length, or of energy per unit area. The two are equivalent, but when referring to energy per unit of area, it is common to use the term surface energy, which is a more general term in the sense that it applies also to solids.

How to Calculate Solubility Parameter Given Surface Tension?

Solubility Parameter Given Surface Tension calculator uses Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43) to calculate the Solubility Parameter, The Solubility Parameter Given Surface Tension formula is defined as a numerical value that indicates the relative solvency behavior of a specific solvent. It is derived from the cohesive energy density of the solvent, which in turn is derived from the heat of vaporization. Solubility Parameter is denoted by δ symbol.

How to calculate Solubility Parameter Given Surface Tension using this online calculator? To use this online calculator for Solubility Parameter Given Surface Tension, enter Surface Tension of Fluid (γ) & Molar Volume (V_m) and hit the calculate button. Here is how the Solubility Parameter Given Surface Tension calculation can be explained with given input values -> 0.852074 = 4.1*(0.073/(22.4)^(1/3))^(0.43).

FAQ

What is Solubility Parameter Given Surface Tension?

The Solubility Parameter Given Surface Tension formula is defined as a numerical value that indicates the relative solvency behavior of a specific solvent. It is derived from the cohesive energy density of the solvent, which in turn is derived from the heat of vaporization and is represented as δ = 4.1*(γ/(V_m)^(1/3))^(0.43) or Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43). Surface Tension of Fluid is the energy or work required to increase the surface area of a fluid due to intermolecular forces & Molar Volume is the volume occupied by one mole of a real gas at standard temperature and pressure.

How to calculate Solubility Parameter Given Surface Tension?

The Solubility Parameter Given Surface Tension formula is defined as a numerical value that indicates the relative solvency behavior of a specific solvent. It is derived from the cohesive energy density of the solvent, which in turn is derived from the heat of vaporization is calculated using Solubility Parameter = 4.1*(Surface Tension of Fluid/(Molar Volume)^(1/3))^(0.43). To calculate Solubility Parameter Given Surface Tension, you need Surface Tension of Fluid (γ) & Molar Volume (V_m). With our tool, you need to enter the respective value for Surface Tension of Fluid & Molar Volume and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search