Soderberg Line Mean stress Calculator

✖Tensile Yield Strength for Fluctuating load is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Tensile Yield Strength for Fluctuating load [σ_yt]			+10% -10%
✖Stress amplitude for fluctuating load is defined as the amount of stress deviation from the mean stress and is also called the alternating component of stress in fluctuating loads.ⓘ Stress Amplitude for Fluctuating Load [σ_a]			+10% -10%
✖The Endurance Limit of a material is defined as the stress below which a material can endure an infinite number of repeated load cycles without exhibiting failure.ⓘ Endurance Limit [S_e]			+10% -10%

✖Mean Stress for Fluctuating Load is defined as the amount of mean stress acting when a material or component is subjected to fluctuating stress.ⓘ Soderberg Line Mean stress [σ_m]

⎘ Copy

👎

Formula

Reset

👍

Download Soderberg and Goodman Lines Formulas PDF PDF Image

Soderberg Line Mean stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit)
σ_m = σ_yt*(1-σ_a/S_e)
This formula uses 4 Variables

Variables Used

Mean Stress for Fluctuating Load - (Measured in Pascal) - Mean Stress for Fluctuating Load is defined as the amount of mean stress acting when a material or component is subjected to fluctuating stress.
Tensile Yield Strength for Fluctuating load - (Measured in Pascal) - Tensile Yield Strength for Fluctuating load is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Stress Amplitude for Fluctuating Load - (Measured in Pascal) - Stress amplitude for fluctuating load is defined as the amount of stress deviation from the mean stress and is also called the alternating component of stress in fluctuating loads.
Endurance Limit - (Measured in Pascal) - The Endurance Limit of a material is defined as the stress below which a material can endure an infinite number of repeated load cycles without exhibiting failure.

STEP 1: Convert Input(s) to Base Unit

Tensile Yield Strength for Fluctuating load: 440.0004 Newton per Square Millimeter --> 440000400 Pascal (Check conversion here)
Stress Amplitude for Fluctuating Load: 30 Newton per Square Millimeter --> 30000000 Pascal (Check conversion here)
Endurance Limit: 33.84615 Newton per Square Millimeter --> 33846150 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_m = σ_yt*(1-σ_a/S_e) --> 440000400*(1-30000000/33846150)

Evaluating ... ...

σ_m = 50000001.1363183

STEP 3: Convert Result to Output's Unit

50000001.1363183 Pascal -->50.0000011363183 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

50.0000011363183 ≈ 50 Newton per Square Millimeter <-- Mean Stress for Fluctuating Load

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Soderberg and Goodman Lines » Soderberg Line Mean stress

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Chilvera Bhanu Teja

Institute of Aeronautical Engineering (IARE), Hyderabad

Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

< Soderberg and Goodman Lines Calculators

Soderberg Line Tensile Yield Strength

Go Tensile Yield Strength for Fluctuating load = Mean Stress for Fluctuating Load/(1-Stress Amplitude for Fluctuating Load/Endurance Limit)

Soderberg Line Amplitude Stress

Go Stress Amplitude for Fluctuating Load = Endurance Limit*(1-Mean Stress for Fluctuating Load/Tensile Yield Strength for Fluctuating load)

Soderberg Line Endurance Limit

Go Endurance Limit = Stress Amplitude for Fluctuating Load/(1-Mean Stress for Fluctuating Load/Tensile Yield Strength for Fluctuating load)

Soderberg Line Mean stress

Go Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit)

Soderberg Line Mean stress Formula

Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit)
σ_m = σ_yt*(1-σ_a/S_e)

What is Soderberg Line ?

The Soderberg line is a graphical representation used in fatigue analysis to predict the failure of materials under fluctuating loads. It defines the boundary between safe and unsafe operating conditions, combining both the material's yield strength and its fatigue strength. In this line, the mean stress and alternating stress are plotted, and the line represents the condition where a material will fail. The Soderberg line is considered a conservative approach to ensure safety in designs subjected to cyclic loading.

How to Calculate Soderberg Line Mean stress?

Soderberg Line Mean stress calculator uses Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit) to calculate the Mean Stress for Fluctuating Load, Soderberg Line Mean stress is defined as the amount of mean stress acting on a material when the material is subjected to fluctuating stress or under fatigue loading and this value is obtained using the Soderberg line diagram. Mean Stress for Fluctuating Load is denoted by σ_m symbol.

How to calculate Soderberg Line Mean stress using this online calculator? To use this online calculator for Soderberg Line Mean stress, enter Tensile Yield Strength for Fluctuating load (σ_yt), Stress Amplitude for Fluctuating Load (σ_a) & Endurance Limit (S_e) and hit the calculate button. Here is how the Soderberg Line Mean stress calculation can be explained with given input values -> 9.7E-6 = 440000400*(1-30000000/33846150).

FAQ

What is Soderberg Line Mean stress?

Soderberg Line Mean stress is defined as the amount of mean stress acting on a material when the material is subjected to fluctuating stress or under fatigue loading and this value is obtained using the Soderberg line diagram and is represented as σ_m = σ_yt*(1-σ_a/S_e) or Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit). Tensile Yield Strength for Fluctuating load is the stress a material can withstand without permanent deformation or a point at which it will no longer return to its original dimensions, Stress amplitude for fluctuating load is defined as the amount of stress deviation from the mean stress and is also called the alternating component of stress in fluctuating loads & The Endurance Limit of a material is defined as the stress below which a material can endure an infinite number of repeated load cycles without exhibiting failure.

How to calculate Soderberg Line Mean stress?

Soderberg Line Mean stress is defined as the amount of mean stress acting on a material when the material is subjected to fluctuating stress or under fatigue loading and this value is obtained using the Soderberg line diagram is calculated using Mean Stress for Fluctuating Load = Tensile Yield Strength for Fluctuating load*(1-Stress Amplitude for Fluctuating Load/Endurance Limit). To calculate Soderberg Line Mean stress, you need Tensile Yield Strength for Fluctuating load (σ_yt), Stress Amplitude for Fluctuating Load (σ_a) & Endurance Limit (S_e). With our tool, you need to enter the respective value for Tensile Yield Strength for Fluctuating load, Stress Amplitude for Fluctuating Load & Endurance Limit and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Mean Stress for Fluctuating Load?

In this formula, Mean Stress for Fluctuating Load uses Tensile Yield Strength for Fluctuating load, Stress Amplitude for Fluctuating Load & Endurance Limit. We can use 2 other way(s) to calculate the same, which is/are as follows -

Mean Stress for Fluctuating Load = Ultimate Tensile strength*(1-Stress Amplitude for Fluctuating Load/Endurance Limit)
Mean Stress for Fluctuating Load = Limiting Value of Mean Stress/Design Factor of Safety

Home

FREE PDFs

🔍 Search