Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress Calculator

✖Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.ⓘ Load on Flat Plate [P]			+10% -10%
✖Nominal Stress is the value of the stress at the minimum cross-section.ⓘ Nominal Stress [σ_o]			+10% -10%
✖Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.ⓘ Thickness of Plate [t]			+10% -10%

✖Smaller Width of Plate is the smaller width of a plate which has two different widths or cross-sections or side to side distance.ⓘ Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress [d_o]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Smaller Width of Plate = Load on Flat Plate/(Nominal Stress*Thickness of Plate)
d_o = P/(σ_o*t)
This formula uses 4 Variables

Variables Used

Smaller Width of Plate - (Measured in Meter) - Smaller Width of Plate is the smaller width of a plate which has two different widths or cross-sections or side to side distance.
Load on Flat Plate - (Measured in Newton) - Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.
Nominal Stress - (Measured in Pascal) - Nominal Stress is the value of the stress at the minimum cross-section.
Thickness of Plate - (Measured in Meter) - Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

STEP 1: Convert Input(s) to Base Unit

Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Nominal Stress: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_o = P/(σ_o*t) --> 8750/(25000000*0.01)

Evaluating ... ...

d_o = 0.035

STEP 3: Convert Result to Output's Unit

0.035 Meter -->35 Millimeter (Check conversion here)

FINAL ANSWER

35 Millimeter <-- Smaller Width of Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Flat Plate against Fluctuating Loads » Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Flat Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Flat Plate with Shoulder Fillet

LaTeX Go Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate)

Theoretical Stress Concentration Factor

LaTeX Go Theoretical Stress Concentration Factor = Highest Value of Actual Stress near Discontinuity/Nominal Stress

Theoretical Stress Concentration Factor for Elliptical Crack

LaTeX Go Theoretical Stress Concentration Factor = 1+Major Axis of Elliptical Crack/Minor Axis of Elliptical Crack

Mean Stress for Fluctuating Load

LaTeX Go Mean Stress for Fluctuating Load = (Maximum Stress at Crack Tip+Minimum Stress at Crack Tip)/2

Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress Formula

LaTeX Go

Smaller Width of Plate = Load on Flat Plate/(Nominal Stress*Thickness of Plate)
d_o = P/(σ_o*t)

What could be the factors for Variation in Properties of Materials?

In the design of machine components, it is assumed that the material is homogeneous throughout the component. In practice, there is variation in material properties from one end to another due to the following factors:
(a) Internal cracks and flaws like blowholes.
(b) Cavities in welds.
(c) Air holes in steel components.
(d) Nonmetallic or foreign inclusions.

How to Calculate Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress?

Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress calculator uses Smaller Width of Plate = Load on Flat Plate/(Nominal Stress*Thickness of Plate) to calculate the Smaller Width of Plate, The Smaller Width of Flat Plate with Shoulder fillet given Nominal stress is the smaller width of the flat plate with shoulder fillet. Smaller Width of Plate is denoted by d_o symbol.

How to calculate Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress using this online calculator? To use this online calculator for Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress, enter Load on Flat Plate (P), Nominal Stress (σ_o) & Thickness of Plate (t) and hit the calculate button. Here is how the Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress calculation can be explained with given input values -> 35000 = 8750/(25000000*0.01).

FAQ

What is Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress?

The Smaller Width of Flat Plate with Shoulder fillet given Nominal stress is the smaller width of the flat plate with shoulder fillet and is represented as d_o = P/(σ_o*t) or Smaller Width of Plate = Load on Flat Plate/(Nominal Stress*Thickness of Plate). Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate, Nominal Stress is the value of the stress at the minimum cross-section & Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

How to calculate Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress?

The Smaller Width of Flat Plate with Shoulder fillet given Nominal stress is the smaller width of the flat plate with shoulder fillet is calculated using Smaller Width of Plate = Load on Flat Plate/(Nominal Stress*Thickness of Plate). To calculate Smaller Width of Flat Plate with Shoulder Fillet given Nominal stress, you need Load on Flat Plate (P), Nominal Stress (σ_o) & Thickness of Plate (t). With our tool, you need to enter the respective value for Load on Flat Plate, Nominal Stress & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search