Smaller diameter of crater given Taper Calculator

✖Larger diameter is the bigger diameter of hole or other things.ⓘ Larger Diameter [D_sd]			+10% -10%
✖Depth of machined surface is the how deep a surface is machined from the un-machined surface.ⓘ Depth of Machined Surface [H_sd]			+10% -10%
✖Taper produced in EDM is the taper produced due to side sparks during EDM.ⓘ Taper Produced in EDM [T_sd]			+10% -10%

✖The smaller diameter is the smaller of all diameters of a given object.ⓘ Smaller diameter of crater given Taper [d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconventional machining processes Formula PDF PDF Image

Smaller diameter of crater given Taper Solution

STEP 0: Pre-Calculation Summary

Formula Used

Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM
d = D_sd-2*H_sd*T_sd
This formula uses 4 Variables

Variables Used

Smaller Diameter - (Measured in Meter) - The smaller diameter is the smaller of all diameters of a given object.
Larger Diameter - (Measured in Meter) - Larger diameter is the bigger diameter of hole or other things.
Depth of Machined Surface - (Measured in Meter) - Depth of machined surface is the how deep a surface is machined from the un-machined surface.
Taper Produced in EDM - Taper produced in EDM is the taper produced due to side sparks during EDM.

STEP 1: Convert Input(s) to Base Unit

Larger Diameter: 22 Meter --> 22 Meter No Conversion Required
Depth of Machined Surface: 52 Meter --> 52 Meter No Conversion Required
Taper Produced in EDM: 0.2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = D_sd-2*H_sd*T_sd --> 22-2*52*0.2

Evaluating ... ...

d = 1.2

STEP 3: Convert Result to Output's Unit

1.2 Meter --> No Conversion Required

FINAL ANSWER

1.2 Meter <-- Smaller Diameter

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Unconventional machining processes » Electro Discharge Machining (EDM) » Possible surface defects in EDM » Taper Formation » Smaller diameter of crater given Taper

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has verified this Calculator and 200+ more calculators!

< Taper Formation Calculators

Empirical constant for taper

LaTeX Go Empirical Constant = (Larger Diameter-Smaller Diameter)/(2*Depth of Machined Surface*Smaller Diameter^2)

Depth of machined surface

LaTeX Go Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Empirical Constant*Smaller Diameter^2)

Upper diameter of hole

LaTeX Go Larger Diameter = 2*Depth of Machined Surface*Empirical Constant*Smaller Diameter^2+Smaller Diameter

Taper produced due to side sparks

LaTeX Go Taper Produced in EDM = Empirical Constant*Smaller Diameter^2

Smaller diameter of crater given Taper Formula

LaTeX Go

Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM
d = D_sd-2*H_sd*T_sd

What factors affects surface finish during EDM ?

The amount of material removed and the surface finish produced is dependent upon the current in the spark. The material removed by the spark can be assumed to be a crater. The amount removed therefore will depend upon the crater depth, which is directly proportional to the current. Thus as the material removed increases and at the same time, the surface finish also decreases. However, decreasing the current in the spark, but increasing its frequency will improve the surface finish in view of the small crater size, but at the same time, the material removal rate can be maintained by increasing the frequency.

How to Calculate Smaller diameter of crater given Taper?

Smaller diameter of crater given Taper calculator uses Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM to calculate the Smaller Diameter, Smaller diameter of crater given Taper formula is defined as smallest width of hole produced due to side sparks during EDM. Smaller Diameter is denoted by d symbol.

How to calculate Smaller diameter of crater given Taper using this online calculator? To use this online calculator for Smaller diameter of crater given Taper, enter Larger Diameter (D_sd), Depth of Machined Surface (H_sd) & Taper Produced in EDM (T_sd) and hit the calculate button. Here is how the Smaller diameter of crater given Taper calculation can be explained with given input values -> 19.72 = 22-2*52*0.2.

FAQ

What is Smaller diameter of crater given Taper?

Smaller diameter of crater given Taper formula is defined as smallest width of hole produced due to side sparks during EDM and is represented as d = D_sd-2*H_sd*T_sd or Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM. Larger diameter is the bigger diameter of hole or other things, Depth of machined surface is the how deep a surface is machined from the un-machined surface & Taper produced in EDM is the taper produced due to side sparks during EDM.

How to calculate Smaller diameter of crater given Taper?

Smaller diameter of crater given Taper formula is defined as smallest width of hole produced due to side sparks during EDM is calculated using Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM. To calculate Smaller diameter of crater given Taper, you need Larger Diameter (D_sd), Depth of Machined Surface (H_sd) & Taper Produced in EDM (T_sd). With our tool, you need to enter the respective value for Larger Diameter, Depth of Machined Surface & Taper Produced in EDM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Smaller Diameter?

In this formula, Smaller Diameter uses Larger Diameter, Depth of Machined Surface & Taper Produced in EDM. We can use 1 other way(s) to calculate the same, which is/are as follows -

Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant)

Home

FREE PDFs

🔍 Search