Small-Signal Input Resistance between Base and Emitter using Transconductance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Signal Resistance = Common Emitter Current Gain/Transconductance
Rs = β/Gm
This formula uses 3 Variables
Variables Used
Signal Resistance - (Measured in Ohm) - Signal Resistance is the resistance which is fed with the signal voltage source vs to an Amplifier.
Common Emitter Current Gain - Common emitter current gain is influenced by 2 factors: width of base region W, and relative dopings of base region and emitter region. Its range varies from 50-200.
Transconductance - (Measured in Siemens) - Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.
STEP 1: Convert Input(s) to Base Unit
Common Emitter Current Gain: 65 --> No Conversion Required
Transconductance: 1.72 Millisiemens --> 0.00172 Siemens (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Rs = β/Gm --> 65/0.00172
Evaluating ... ...
Rs = 37790.6976744186
STEP 3: Convert Result to Output's Unit
37790.6976744186 Ohm -->37.7906976744186 Kilohm (Check conversion ​here)
FINAL ANSWER
37.7906976744186 37.7907 Kilohm <-- Signal Resistance
(Calculation completed in 00.005 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Resistance Calculators

Small-Signal Input Resistance between Base and Emitter using Transconductance
​ LaTeX ​ Go Signal Resistance = Common Emitter Current Gain/Transconductance
Emitter Resistance given Threshold Voltage
​ LaTeX ​ Go Emitter Resistance = Threshold Voltage/Emitter Current
Small-Signal Input Resistance between Base and Emitter using Base Current
​ LaTeX ​ Go Signal Resistance = Threshold Voltage/Base Current
Small-Signal Input Resistance between Base and Emitter
​ LaTeX ​ Go Signal Resistance = Input Voltage/Base Current

Small-Signal Input Resistance between Base and Emitter using Transconductance Formula

​LaTeX ​Go
Signal Resistance = Common Emitter Current Gain/Transconductance
Rs = β/Gm

Why input resistance of a transistor is low?

While using a transistor, the emitter-base junction is always forward biased and the collector-base junction is always reverse-biased. Due to it, a small change in emitter current. This means that a small signal voltage variation at the input of the transistor produces a large emitter current variation. This showed that the input resistance of a transistor is low. Since the collector is reverse-biased, it collects all the charge carriers which diffuse into it, through the base. Due to it, a very large change in collector voltage shows only a small change in the collector current. This shows that the output resistance of the transistor is high.

How to Calculate Small-Signal Input Resistance between Base and Emitter using Transconductance?

Small-Signal Input Resistance between Base and Emitter using Transconductance calculator uses Signal Resistance = Common Emitter Current Gain/Transconductance to calculate the Signal Resistance, The Small-Signal Input Resistance between Base and Emitter using Transconductance suggests that for a small signal, the transistor behaves as a voltage-controlled current source. The input port of the controlled current source is between base and emitter and the output port is in between collector and emitter. Signal Resistance is denoted by Rs symbol.

How to calculate Small-Signal Input Resistance between Base and Emitter using Transconductance using this online calculator? To use this online calculator for Small-Signal Input Resistance between Base and Emitter using Transconductance, enter Common Emitter Current Gain (β) & Transconductance (Gm) and hit the calculate button. Here is how the Small-Signal Input Resistance between Base and Emitter using Transconductance calculation can be explained with given input values -> 0.037791 = 65/0.00172.

FAQ

What is Small-Signal Input Resistance between Base and Emitter using Transconductance?
The Small-Signal Input Resistance between Base and Emitter using Transconductance suggests that for a small signal, the transistor behaves as a voltage-controlled current source. The input port of the controlled current source is between base and emitter and the output port is in between collector and emitter and is represented as Rs = β/Gm or Signal Resistance = Common Emitter Current Gain/Transconductance. Common emitter current gain is influenced by 2 factors: width of base region W, and relative dopings of base region and emitter region. Its range varies from 50-200 & Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.
How to calculate Small-Signal Input Resistance between Base and Emitter using Transconductance?
The Small-Signal Input Resistance between Base and Emitter using Transconductance suggests that for a small signal, the transistor behaves as a voltage-controlled current source. The input port of the controlled current source is between base and emitter and the output port is in between collector and emitter is calculated using Signal Resistance = Common Emitter Current Gain/Transconductance. To calculate Small-Signal Input Resistance between Base and Emitter using Transconductance, you need Common Emitter Current Gain (β) & Transconductance (Gm). With our tool, you need to enter the respective value for Common Emitter Current Gain & Transconductance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Signal Resistance?
In this formula, Signal Resistance uses Common Emitter Current Gain & Transconductance. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Signal Resistance = Input Voltage/Base Current
  • Signal Resistance = Threshold Voltage/Base Current
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!