Slope Correction for Slopes Greater than 10 Percent Calculator

✖The Elevation Difference is the vertical distance between two points. This measurement is crucial for determining the relative heights of different locations on a site.ⓘ Elevation Difference [h]			+10% -10%
✖Unsupported Length is the span or distance between supports or points of restraint for a structural member, such as a beam or a column.ⓘ Unsupported Length [U_l]			+10% -10%

✖The Slope Correction is the adjustments made to measured or calculated values to account for the inclination of the land or the slope of the ground surface.ⓘ Slope Correction for Slopes Greater than 10 Percent [Cs]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Measurement of Distance with Tapes Formulas PDF PDF Image

Slope Correction for Slopes Greater than 10 Percent Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3))
Cs = ((h^2)/(2*U_l))+(h^4/(8*U_l^3))
This formula uses 3 Variables

Variables Used

Slope Correction - (Measured in Meter) - The Slope Correction is the adjustments made to measured or calculated values to account for the inclination of the land or the slope of the ground surface.
Elevation Difference - (Measured in Meter) - The Elevation Difference is the vertical distance between two points. This measurement is crucial for determining the relative heights of different locations on a site.
Unsupported Length - (Measured in Meter) - Unsupported Length is the span or distance between supports or points of restraint for a structural member, such as a beam or a column.

STEP 1: Convert Input(s) to Base Unit

Elevation Difference: 13 Meter --> 13 Meter No Conversion Required
Unsupported Length: 9 Meter --> 9 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Cs = ((h^2)/(2*U_l))+(h^4/(8*U_l^3)) --> ((13^2)/(2*9))+(13^4/(8*9^3))

Evaluating ... ...

Cs = 14.2861796982167

STEP 3: Convert Result to Output's Unit

14.2861796982167 Meter --> No Conversion Required

FINAL ANSWER

14.2861796982167 ≈ 14.28618 Meter <-- Slope Correction

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Measurement of Distance with Tapes » Slope Corrections » Slope Correction for Slopes Greater than 10 Percent

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Slope Corrections Calculators

Slope Correction for Slopes Greater than 10 Percent

LaTeX Go Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3))

Horizontal Distance in Slope Measurements

LaTeX Go Horizontal Distance = Slope Distance*cos(Vertical Angle)

Horizontal offset given Slope Correction for Slopes of 10 Percent or Less

LaTeX Go Difference in Elevation = (2*Unsupported Length*Slope Correction)^(1/2)

Slope Correction for Slopes of 10 Percent or Less

LaTeX Go Slope Correction = Difference in Elevation^2/(2*Unsupported Length)

Slope Correction for Slopes Greater than 10 Percent Formula

LaTeX Go

Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3))
Cs = ((h^2)/(2*U_l))+(h^4/(8*U_l^3))

Can Slope Corrections be Negative in Surveying?

Yes, slope corrections can be negative in surveying. This happens when the slope is downhill and the measured distance is shorter than the horizontal distance.

What is Slope and Slope Corrections?

The slope or gradient of a line is a number that describes both the direction and the steepness of the line.
Slope corrections in surveying refer to adjustments made to measured horizontal distances to account for the slope of the ground.

How to Calculate Slope Correction for Slopes Greater than 10 Percent?

Slope Correction for Slopes Greater than 10 Percent calculator uses Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3)) to calculate the Slope Correction, The Slope Correction for Slopes Greater than 10 Percent formula is defined as the method used to correct the distances measured on a slope to their equivalent horizontal distances. This correction is necessary because the length of a slope measurement is longer than the horizontal distance due to the slope's inclination. For slopes greater than 10 percent (which corresponds to a gradient of 1:10 or more), this correction becomes significant. Slope Correction is denoted by Cs symbol.

How to calculate Slope Correction for Slopes Greater than 10 Percent using this online calculator? To use this online calculator for Slope Correction for Slopes Greater than 10 Percent, enter Elevation Difference (h) & Unsupported Length (U_l) and hit the calculate button. Here is how the Slope Correction for Slopes Greater than 10 Percent calculation can be explained with given input values -> 14.28618 = ((13^2)/(2*9))+(13^4/(8*9^3)).

FAQ

What is Slope Correction for Slopes Greater than 10 Percent?

The Slope Correction for Slopes Greater than 10 Percent formula is defined as the method used to correct the distances measured on a slope to their equivalent horizontal distances. This correction is necessary because the length of a slope measurement is longer than the horizontal distance due to the slope's inclination. For slopes greater than 10 percent (which corresponds to a gradient of 1:10 or more), this correction becomes significant and is represented as Cs = ((h^2)/(2*U_l))+(h^4/(8*U_l^3)) or Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3)). The Elevation Difference is the vertical distance between two points. This measurement is crucial for determining the relative heights of different locations on a site & Unsupported Length is the span or distance between supports or points of restraint for a structural member, such as a beam or a column.

How to calculate Slope Correction for Slopes Greater than 10 Percent?

The Slope Correction for Slopes Greater than 10 Percent formula is defined as the method used to correct the distances measured on a slope to their equivalent horizontal distances. This correction is necessary because the length of a slope measurement is longer than the horizontal distance due to the slope's inclination. For slopes greater than 10 percent (which corresponds to a gradient of 1:10 or more), this correction becomes significant is calculated using Slope Correction = ((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3)). To calculate Slope Correction for Slopes Greater than 10 Percent, you need Elevation Difference (h) & Unsupported Length (U_l). With our tool, you need to enter the respective value for Elevation Difference & Unsupported Length and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Slope Correction?

In this formula, Slope Correction uses Elevation Difference & Unsupported Length. We can use 1 other way(s) to calculate the same, which is/are as follows -

Slope Correction = Difference in Elevation^2/(2*Unsupported Length)

Home

FREE PDFs

🔍 Search