Slope at Right End of Simply Supported Beam carrying Couple at Right End Calculator

✖Moment of couple is equal to the product of either of forces and the perpendicular distance between the forces.ⓘ Moment of Couple [M_c]			+10% -10%
✖Length of Beam is defined as the distance between the supports.ⓘ Length of Beam [l]			+10% -10%
✖Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.ⓘ Elasticity Modulus of Concrete [E]			+10% -10%
✖Area Moment of Inertia is a moment about the centroidal axis without considering mass.ⓘ Area Moment of Inertia [I]			+10% -10%

✖The Slope of Beam is the angle between deflected beam to the actual beam at the same point.ⓘ Slope at Right End of Simply Supported Beam carrying Couple at Right End [θ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Slope and Deflection Formulas PDF PDF Image

Slope at Right End of Simply Supported Beam carrying Couple at Right End Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia))
θ = ((M_c*l)/(3*E*I))
This formula uses 5 Variables

Variables Used

Slope of Beam - (Measured in Radian) - The Slope of Beam is the angle between deflected beam to the actual beam at the same point.
Moment of Couple - (Measured in Newton Meter) - Moment of couple is equal to the product of either of forces and the perpendicular distance between the forces.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
Elasticity Modulus of Concrete - (Measured in Pascal) - Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.
Area Moment of Inertia - (Measured in Meter⁴) - Area Moment of Inertia is a moment about the centroidal axis without considering mass.

STEP 1: Convert Input(s) to Base Unit

Moment of Couple: 85 Kilonewton Meter --> 85000 Newton Meter (Check conversion here)
Length of Beam: 5000 Millimeter --> 5 Meter (Check conversion here)
Elasticity Modulus of Concrete: 30000 Megapascal --> 30000000000 Pascal (Check conversion here)
Area Moment of Inertia: 0.0016 Meter⁴ --> 0.0016 Meter⁴ No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

θ = ((M_c*l)/(3*E*I)) --> ((85000*5)/(3*30000000000*0.0016))

Evaluating ... ...

θ = 0.00295138888888889

STEP 3: Convert Result to Output's Unit

0.00295138888888889 Radian --> No Conversion Required

FINAL ANSWER

0.00295138888888889 ≈ 0.002951 Radian <-- Slope of Beam

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Slope and Deflection » Simply Supported Beam » Slope at Right End of Simply Supported Beam carrying Couple at Right End

Credits

Created by krupa sheela pattapu

Acharya Nagarjuna University College of Engg & Technology (ANU), Guntur

krupa sheela pattapu has created this Calculator and 25+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Simply Supported Beam Calculators

Deflection at Any Point on Simply Supported Beam carrying UDL

LaTeX Go Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))

Deflection at Any Point on Simply Supported carrying Couple Moment at Right End

LaTeX Go Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))

Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support

LaTeX Go Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))

Center Deflection of Simply Supported Beam carrying Couple Moment at Right End

LaTeX Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))

Slope at Right End of Simply Supported Beam carrying Couple at Right End Formula

LaTeX Go

Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia))
θ = ((M_c*l)/(3*E*I))

What is Slope of a Beam?

The Slope at any section in a deflected beam is defined as the angle in radians which the tangent at the section makes with the original axis of the beam.

What is Moment of couple?

The tendency of a Force is to rotate a body. It is measured by the moment of the force. The product of one of the two forces of a Couple and the perpendicular distance between their lines of action (called the arm of the Couple) is called the Moment of Couple.

How to Calculate Slope at Right End of Simply Supported Beam carrying Couple at Right End?

Slope at Right End of Simply Supported Beam carrying Couple at Right End calculator uses Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia)) to calculate the Slope of Beam, The Slope at Right End of Simply Supported Beam carrying Couple at Right End is defined as angle between deflected beam to the actual beam at the same point due to couple moment at right end in SSB. Slope of Beam is denoted by θ symbol.

How to calculate Slope at Right End of Simply Supported Beam carrying Couple at Right End using this online calculator? To use this online calculator for Slope at Right End of Simply Supported Beam carrying Couple at Right End, enter Moment of Couple (M_c), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I) and hit the calculate button. Here is how the Slope at Right End of Simply Supported Beam carrying Couple at Right End calculation can be explained with given input values -> 0.002951 = ((85000*5)/(3*30000000000*0.0016)).

FAQ

What is Slope at Right End of Simply Supported Beam carrying Couple at Right End?

The Slope at Right End of Simply Supported Beam carrying Couple at Right End is defined as angle between deflected beam to the actual beam at the same point due to couple moment at right end in SSB and is represented as θ = ((M_c*l)/(3*E*I)) or Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia)). Moment of couple is equal to the product of either of forces and the perpendicular distance between the forces, Length of Beam is defined as the distance between the supports, Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain & Area Moment of Inertia is a moment about the centroidal axis without considering mass.

How to calculate Slope at Right End of Simply Supported Beam carrying Couple at Right End?

The Slope at Right End of Simply Supported Beam carrying Couple at Right End is defined as angle between deflected beam to the actual beam at the same point due to couple moment at right end in SSB is calculated using Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia)). To calculate Slope at Right End of Simply Supported Beam carrying Couple at Right End, you need Moment of Couple (M_c), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I). With our tool, you need to enter the respective value for Moment of Couple, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Slope of Beam?

In this formula, Slope of Beam uses Moment of Couple, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia. We can use 3 other way(s) to calculate the same, which is/are as follows -

Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope of Beam = ((Point Load*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope of Beam = ((Moment of Couple*Length of Beam)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))

Home

FREE PDFs

🔍 Search