Slenderness of Web and Flange given Stiffeners and Concentrated Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Slenderness of Web and Flange = ((((Concentrated Load of Reaction*Clear Distance between Flanges)/(6800*Web Thickness^3))-1)/0.4)^(1/3)
rwf = ((((R*h)/(6800*tw^3))-1)/0.4)^(1/3)
This formula uses 4 Variables
Variables Used
Slenderness of Web and Flange - Slenderness of Web and Flange of a structural element is a measure of its susceptibility to buckling under compressive stress.
Concentrated Load of Reaction - (Measured in Kilonewton) - Concentrated Load of Reaction is the reaction force that is assumed to act at a single point on the structure.
Clear Distance between Flanges - (Measured in Meter) - Clear Distance between Flanges refers to the distance between the two endpoints of the flange. That is the height of the web including fillets.
Web Thickness - (Measured in Meter) - Web Thickness is the thickness of the web section in the member of I section.
STEP 1: Convert Input(s) to Base Unit
Concentrated Load of Reaction: 235 Kilonewton --> 235 Kilonewton No Conversion Required
Clear Distance between Flanges: 122 Millimeter --> 0.122 Meter (Check conversion ​here)
Web Thickness: 100 Millimeter --> 0.1 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
rwf = ((((R*h)/(6800*tw^3))-1)/0.4)^(1/3) --> ((((235*0.122)/(6800*0.1^3))-1)/0.4)^(1/3)
Evaluating ... ...
rwf = 2.00336443515364
STEP 3: Convert Result to Output's Unit
2.00336443515364 --> No Conversion Required
FINAL ANSWER
2.00336443515364 2.003364 <-- Slenderness of Web and Flange
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Webs under Concentrated Loads Calculators

Stress when Concentrated Load is Applied Close to Beam End
​ LaTeX ​ Go Compressive Stress = Concentrated Load of Reaction/(Web Thickness*(Bearing or Plate Length+2.5*Distance from Flange to Web Fillet))
Stress for Concentrated Load Applied at Distance Larger than Depth of Beam
​ LaTeX ​ Go Compressive Stress = Concentrated Load of Reaction/(Web Thickness*(Bearing or Plate Length+5*Distance from Flange to Web Fillet))
Length of Bearing when Load applied at Distance Larger than Depth of Beam
​ LaTeX ​ Go Bearing or Plate Length = (Concentrated Load of Reaction/(Compressive Stress*Web Thickness))-5*Distance from Flange to Web Fillet
Web Thickness for Given Stress
​ LaTeX ​ Go Web Thickness = Concentrated Load of Reaction/(Compressive Stress*(Bearing or Plate Length+5*Distance from Flange to Web Fillet))

Slenderness of Web and Flange given Stiffeners and Concentrated Load Formula

​LaTeX ​Go
Slenderness of Web and Flange = ((((Concentrated Load of Reaction*Clear Distance between Flanges)/(6800*Web Thickness^3))-1)/0.4)^(1/3)
rwf = ((((R*h)/(6800*tw^3))-1)/0.4)^(1/3)

What are Flange and Web Slenderness?

The Web slenderness and flange slenderness varied from a fairly compact range to highly slender values. The optimized values for flange and web slenderness were determined for each unbraced length ratio and a relationship between unbraced length and optimum flange slenderness values was established.

What is Web Crippling?

Web Crippling is similar to web buckling, but it happens in the web of the beam when it's subjected to compressive stress. The reaction at support developed due to high concentrated point load on the beam leads to the development of high compressive stresses in the thin web close to the upper flange or lower flange. As a result of this, the thin web may develop a fold at a place close to the flange and this is called web crippling.

How to Calculate Slenderness of Web and Flange given Stiffeners and Concentrated Load?

Slenderness of Web and Flange given Stiffeners and Concentrated Load calculator uses Slenderness of Web and Flange = ((((Concentrated Load of Reaction*Clear Distance between Flanges)/(6800*Web Thickness^3))-1)/0.4)^(1/3) to calculate the Slenderness of Web and Flange, The Slenderness of Web and Flange given Stiffeners and Concentrated Load formula is defined as the slenderness ratios of web and flange, web thickness, column load and clear distance between flanges used for finding slenderness. Slenderness of Web and Flange is denoted by rwf symbol.

How to calculate Slenderness of Web and Flange given Stiffeners and Concentrated Load using this online calculator? To use this online calculator for Slenderness of Web and Flange given Stiffeners and Concentrated Load, enter Concentrated Load of Reaction (R), Clear Distance between Flanges (h) & Web Thickness (tw) and hit the calculate button. Here is how the Slenderness of Web and Flange given Stiffeners and Concentrated Load calculation can be explained with given input values -> 21.92394 = ((((235000*0.122)/(6800*0.1^3))-1)/0.4)^(1/3).

FAQ

What is Slenderness of Web and Flange given Stiffeners and Concentrated Load?
The Slenderness of Web and Flange given Stiffeners and Concentrated Load formula is defined as the slenderness ratios of web and flange, web thickness, column load and clear distance between flanges used for finding slenderness and is represented as rwf = ((((R*h)/(6800*tw^3))-1)/0.4)^(1/3) or Slenderness of Web and Flange = ((((Concentrated Load of Reaction*Clear Distance between Flanges)/(6800*Web Thickness^3))-1)/0.4)^(1/3). Concentrated Load of Reaction is the reaction force that is assumed to act at a single point on the structure, Clear Distance between Flanges refers to the distance between the two endpoints of the flange. That is the height of the web including fillets & Web Thickness is the thickness of the web section in the member of I section.
How to calculate Slenderness of Web and Flange given Stiffeners and Concentrated Load?
The Slenderness of Web and Flange given Stiffeners and Concentrated Load formula is defined as the slenderness ratios of web and flange, web thickness, column load and clear distance between flanges used for finding slenderness is calculated using Slenderness of Web and Flange = ((((Concentrated Load of Reaction*Clear Distance between Flanges)/(6800*Web Thickness^3))-1)/0.4)^(1/3). To calculate Slenderness of Web and Flange given Stiffeners and Concentrated Load, you need Concentrated Load of Reaction (R), Clear Distance between Flanges (h) & Web Thickness (tw). With our tool, you need to enter the respective value for Concentrated Load of Reaction, Clear Distance between Flanges & Web Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Slenderness of Web and Flange?
In this formula, Slenderness of Web and Flange uses Concentrated Load of Reaction, Clear Distance between Flanges & Web Thickness. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Slenderness of Web and Flange = (Web Depth/Web Thickness)/(Maximum Unbraced Length/Width of Compression Flange)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!