Slant Height of considered Point given Unit Pressure Calculator

✖Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Superimposed Load [P]			+10% -10%
✖The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.ⓘ Distance between Pipe and Fill [H]			+10% -10%
✖The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.ⓘ Unit Pressure [P_t]			+10% -10%

✖The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.ⓘ Slant Height of considered Point given Unit Pressure [h_Slant]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sewers their Construction , Maintenance and Required Appurtenances Formulas PDF PDF Image

Slant Height of considered Point given Unit Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slant Height = ((3*Superimposed Load*(Distance between Pipe and Fill)^3)/(2*pi*Unit Pressure))^(1/5)
h_Slant = ((3*P*(H)^3)/(2*pi*P_t))^(1/5)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Slant Height - (Measured in Meter) - The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.
Superimposed Load - (Measured in Newton) - Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.
Distance between Pipe and Fill - (Measured in Meter) - The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.
Unit Pressure - (Measured in Pascal) - The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.

STEP 1: Convert Input(s) to Base Unit

Superimposed Load: 10 Newton --> 10 Newton No Conversion Required
Distance between Pipe and Fill: 3 Meter --> 3 Meter No Conversion Required
Unit Pressure: 16 Pascal --> 16 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_Slant = ((3*P*(H)^3)/(2*pi*P_t))^(1/5) --> ((3*10*(3)^3)/(2*pi*16))^(1/5)

Evaluating ... ...

h_Slant = 1.5178785843319

STEP 3: Convert Result to Output's Unit

1.5178785843319 Meter --> No Conversion Required

FINAL ANSWER

1.5178785843319 ≈ 1.517879 Meter <-- Slant Height

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sewers their Construction , Maintenance and Required Appurtenances » Pressure Due to External Loads » Slant Height of considered Point given Unit Pressure

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Pressure Due to External Loads Calculators

External Diameter of Pipe given Load Per Unit Length for Pipes

LaTeX Go External Diameter = sqrt(Load per unit Length/(Pipe Coefficient*Specific Weight of Fill))

Pipe Coefficient given Load Per Unit Length for Pipes

LaTeX Go Pipe Coefficient = (Load per unit Length/(Specific Weight of Fill*(External Diameter)^2))

Specific Weight of Fill Material given Load Per Unit Length for Pipes

LaTeX Go Specific Weight of Fill = Load per unit Length/(Pipe Coefficient*(External Diameter)^2)

Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

LaTeX Go Load per unit Length = Pipe Coefficient*Specific Weight of Fill*(External Diameter)^2

Slant Height of considered Point given Unit Pressure Formula

LaTeX Go

Slant Height = ((3*Superimposed Load*(Distance between Pipe and Fill)^3)/(2*pi*Unit Pressure))^(1/5)
h_Slant = ((3*P*(H)^3)/(2*pi*P_t))^(1/5)

What is slant height ?

The slant height of an object (such as a frustum, or pyramid) is the distance measured along a lateral face from the base to the apex along the "center" of the face.

How to Calculate Slant Height of considered Point given Unit Pressure?

Slant Height of considered Point given Unit Pressure calculator uses Slant Height = ((3*Superimposed Load*(Distance between Pipe and Fill)^3)/(2*pi*Unit Pressure))^(1/5) to calculate the Slant Height, The Slant Height of Considered Point given Unit Pressure calculates the slant height of considered point when ee have prior information of other parameters. Slant Height is denoted by h_Slant symbol.

How to calculate Slant Height of considered Point given Unit Pressure using this online calculator? To use this online calculator for Slant Height of considered Point given Unit Pressure, enter Superimposed Load (P), Distance between Pipe and Fill (H) & Unit Pressure (P_t) and hit the calculate button. Here is how the Slant Height of considered Point given Unit Pressure calculation can be explained with given input values -> 1.517879 = ((3*10*(3)^3)/(2*pi*16))^(1/5).

FAQ

What is Slant Height of considered Point given Unit Pressure?

The Slant Height of Considered Point given Unit Pressure calculates the slant height of considered point when ee have prior information of other parameters and is represented as h_Slant = ((3*P*(H)^3)/(2*pi*P_t))^(1/5) or Slant Height = ((3*Superimposed Load*(Distance between Pipe and Fill)^3)/(2*pi*Unit Pressure))^(1/5). Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating, The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill & The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.

How to calculate Slant Height of considered Point given Unit Pressure?

The Slant Height of Considered Point given Unit Pressure calculates the slant height of considered point when ee have prior information of other parameters is calculated using Slant Height = ((3*Superimposed Load*(Distance between Pipe and Fill)^3)/(2*pi*Unit Pressure))^(1/5). To calculate Slant Height of considered Point given Unit Pressure, you need Superimposed Load (P), Distance between Pipe and Fill (H) & Unit Pressure (P_t). With our tool, you need to enter the respective value for Superimposed Load, Distance between Pipe and Fill & Unit Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search