Slant Height of Cone given Total Surface Area Calculator

✖Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.ⓘ Total Surface Area of Cone [TSA]			+10% -10%
✖Base Radius of Cone is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone.ⓘ Base Radius of Cone [r_Base]			+10% -10%

✖Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.ⓘ Slant Height of Cone given Total Surface Area [h_Slant]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cone Formula PDF PDF Image

Slant Height of Cone given Total Surface Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone
h_Slant = TSA/(pi*r_Base)-r_Base
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Slant Height of Cone - (Measured in Meter) - Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.
Total Surface Area of Cone - (Measured in Square Meter) - Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.
Base Radius of Cone - (Measured in Meter) - Base Radius of Cone is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Cone: 665 Square Meter --> 665 Square Meter No Conversion Required
Base Radius of Cone: 10 Meter --> 10 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_Slant = TSA/(pi*r_Base)-r_Base --> 665/(pi*10)-10

Evaluating ... ...

h_Slant = 11.1676074312221

STEP 3: Convert Result to Output's Unit

11.1676074312221 Meter --> No Conversion Required

FINAL ANSWER

11.1676074312221 ≈ 11.16761 Meter <-- Slant Height of Cone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Cone » Cone » Slant Height of Cone » Slant Height of Cone given Total Surface Area

Credits

Created by Aagam Bakliwal

College of Engineering, Pune (COEP), India

Aagam Bakliwal has created this Calculator and 4 more calculators!

Verified by Nayana Phulphagar

Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI

Nayana Phulphagar has verified this Calculator and 1500+ more calculators!

< Slant Height of Cone Calculators

Slant Height of Cone given Volume

LaTeX Go Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)

Slant Height of Cone given Total Surface Area

LaTeX Go Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone

Slant Height of Cone given Lateral Surface Area

LaTeX Go Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)

Slant Height of Cone

LaTeX Go Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)

< Slant Height of Cone Calculators

Slant Height of Cone given Volume

LaTeX Go Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)

Slant Height of Cone given Total Surface Area

LaTeX Go Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone

Slant Height of Cone given Lateral Surface Area

LaTeX Go Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)

Slant Height of Cone

LaTeX Go Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)

Slant Height of Cone given Total Surface Area Formula

LaTeX Go

Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone
h_Slant = TSA/(pi*r_Base)-r_Base

What is a Cone?

A Cone is obtained by rotating a line inclined at a fixed acute angle from a fixed axis of rotation. The sharp tip is called the apex of the Cone. If the rotating line is crossing the axis of rotation, then the resulting shape is a double-napped Cone - two oppositely placed Cones joined on the apex. Cutting a Cone by a plane will result in some important two-dimensional shapes like circles, ellipses, parabolas, and hyperbolas, depending on the angle of cutting.

How to Calculate Slant Height of Cone given Total Surface Area?

Slant Height of Cone given Total Surface Area calculator uses Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone to calculate the Slant Height of Cone, Slant Height of Cone given Total Surface Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area of the Cone. Slant Height of Cone is denoted by h_Slant symbol.

How to calculate Slant Height of Cone given Total Surface Area using this online calculator? To use this online calculator for Slant Height of Cone given Total Surface Area, enter Total Surface Area of Cone (TSA) & Base Radius of Cone (r_Base) and hit the calculate button. Here is how the Slant Height of Cone given Total Surface Area calculation can be explained with given input values -> 11.16761 = 665/(pi*10)-10.

FAQ

What is Slant Height of Cone given Total Surface Area?

Slant Height of Cone given Total Surface Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area of the Cone and is represented as h_Slant = TSA/(pi*r_Base)-r_Base or Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone. Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone & Base Radius of Cone is defined as the distance between the center and any point on the circumference of the base circular surface of the Cone.

How to calculate Slant Height of Cone given Total Surface Area?

Slant Height of Cone given Total Surface Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area of the Cone is calculated using Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone. To calculate Slant Height of Cone given Total Surface Area, you need Total Surface Area of Cone (TSA) & Base Radius of Cone (r_Base). With our tool, you need to enter the respective value for Total Surface Area of Cone & Base Radius of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Slant Height of Cone?

In this formula, Slant Height of Cone uses Total Surface Area of Cone & Base Radius of Cone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)
Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)
Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)

Home

FREE PDFs

🔍 Search