Slant Height of Cone given Total Surface Area and Base Area Calculator

✖Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.ⓘ Total Surface Area of Cone [TSA]			+10% -10%
✖Base Area of Cone is the total quantity of plane enclosed on the base circular surface of the Cone.ⓘ Base Area of Cone [A_Base]			+10% -10%

✖Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.ⓘ Slant Height of Cone given Total Surface Area and Base Area [h_Slant]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cone Formula PDF PDF Image

Slant Height of Cone given Total Surface Area and Base Area Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi)
h_Slant = TSA/sqrt(pi*A_Base)-sqrt(A_Base/pi)
This formula uses 1 Constants, 1 Functions, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Slant Height of Cone - (Measured in Meter) - Slant Height of Cone is the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone.
Total Surface Area of Cone - (Measured in Square Meter) - Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone.
Base Area of Cone - (Measured in Square Meter) - Base Area of Cone is the total quantity of plane enclosed on the base circular surface of the Cone.

STEP 1: Convert Input(s) to Base Unit

Total Surface Area of Cone: 665 Square Meter --> 665 Square Meter No Conversion Required
Base Area of Cone: 315 Square Meter --> 315 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_Slant = TSA/sqrt(pi*A_Base)-sqrt(A_Base/pi) --> 665/sqrt(pi*315)-sqrt(315/pi)

Evaluating ... ...

h_Slant = 11.1259686302076

STEP 3: Convert Result to Output's Unit

11.1259686302076 Meter --> No Conversion Required

FINAL ANSWER

11.1259686302076 ≈ 11.12597 Meter <-- Slant Height of Cone

(Calculation completed in 00.004 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Cone » Cone » Slant Height of Cone » Slant Height of Cone given Total Surface Area and Base Area

Credits

Created by Dhruv Walia

Indian Institute of Technology, Indian School of Mines, DHANBAD (IIT ISM), Dhanbad, Jharkhand

Dhruv Walia has created this Calculator and 1100+ more calculators!

Verified by Nayana Phulphagar

Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI

Nayana Phulphagar has verified this Calculator and 1500+ more calculators!

< Slant Height of Cone Calculators

Slant Height of Cone given Volume

LaTeX Go Slant Height of Cone = sqrt(((3*Volume of Cone)/(pi*Base Radius of Cone^2))^2+Base Radius of Cone^2)

Slant Height of Cone given Total Surface Area

LaTeX Go Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone

Slant Height of Cone given Lateral Surface Area

LaTeX Go Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)

Slant Height of Cone

LaTeX Go Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)

Slant Height of Cone given Total Surface Area and Base Area Formula

LaTeX Go

Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi)
h_Slant = TSA/sqrt(pi*A_Base)-sqrt(A_Base/pi)

What is a Cone?

A Cone is obtained by rotating a line inclined at a fixed acute angle from a fixed axis of rotation. The sharp tip is called the apex of the Cone. If the rotating line is crossing the axis of rotation, then the resulting shape is a double-napped Cone - two oppositely placed Cones joined on the apex. Cutting a Cone by a plane will result in some important two-dimensional shapes like circles, ellipses, parabolas, and hyperbolas, depending on the angle of cutting.

How to Calculate Slant Height of Cone given Total Surface Area and Base Area?

Slant Height of Cone given Total Surface Area and Base Area calculator uses Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi) to calculate the Slant Height of Cone, The Slant Height of Cone given Total Surface Area and Base Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base area of the Cone. Slant Height of Cone is denoted by h_Slant symbol.

How to calculate Slant Height of Cone given Total Surface Area and Base Area using this online calculator? To use this online calculator for Slant Height of Cone given Total Surface Area and Base Area, enter Total Surface Area of Cone (TSA) & Base Area of Cone (A_Base) and hit the calculate button. Here is how the Slant Height of Cone given Total Surface Area and Base Area calculation can be explained with given input values -> 11.12597 = 665/sqrt(pi*315)-sqrt(315/pi).

FAQ

What is Slant Height of Cone given Total Surface Area and Base Area?

The Slant Height of Cone given Total Surface Area and Base Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base area of the Cone and is represented as h_Slant = TSA/sqrt(pi*A_Base)-sqrt(A_Base/pi) or Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi). Total Surface Area of Cone is defined as the total quantity of plane enclosed on the entire surface of the Cone & Base Area of Cone is the total quantity of plane enclosed on the base circular surface of the Cone.

How to calculate Slant Height of Cone given Total Surface Area and Base Area?

The Slant Height of Cone given Total Surface Area and Base Area formula is defined as the length of the line segment joining the apex of the Cone to any point on the circumference of the circular base of the Cone, and calculated using the total surface area and base area of the Cone is calculated using Slant Height of Cone = Total Surface Area of Cone/sqrt(pi*Base Area of Cone)-sqrt(Base Area of Cone/pi). To calculate Slant Height of Cone given Total Surface Area and Base Area, you need Total Surface Area of Cone (TSA) & Base Area of Cone (A_Base). With our tool, you need to enter the respective value for Total Surface Area of Cone & Base Area of Cone and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Slant Height of Cone?

In this formula, Slant Height of Cone uses Total Surface Area of Cone & Base Area of Cone. We can use 3 other way(s) to calculate the same, which is/are as follows -

Slant Height of Cone = Lateral Surface Area of Cone/(pi*Base Radius of Cone)
Slant Height of Cone = Total Surface Area of Cone/(pi*Base Radius of Cone)-Base Radius of Cone
Slant Height of Cone = sqrt(Height of Cone^2+Base Radius of Cone^2)

Home

FREE PDFs

🔍 Search