Slant Height at Rectangular Widths of Ingot Calculator

✖Height of Ingot is the vertical distance between the top and bottom rectangular faces of the Ingot.ⓘ Height of Ingot [h]			+10% -10%
✖Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot.ⓘ Larger Rectangular Length of Ingot [l_{Large Rectangle}]			+10% -10%
✖Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.ⓘ Smaller Rectangular Length of Ingot [l_{Small Rectangle}]			+10% -10%

✖Slant Height at Rectangular Widths of Ingot is the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot.ⓘ Slant Height at Rectangular Widths of Ingot [h_Slant(Width)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Ingot Formulas PDF PDF Image

Slant Height at Rectangular Widths of Ingot Solution

STEP 0: Pre-Calculation Summary

Formula Used

Slant Height at Rectangular Widths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4)
h_Slant(Width) = sqrt(h^2+((l_{Large Rectangle}-l_{Small Rectangle})^2)/4)
This formula uses 1 Functions, 4 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Slant Height at Rectangular Widths of Ingot - (Measured in Meter) - Slant Height at Rectangular Widths of Ingot is the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot.
Height of Ingot - (Measured in Meter) - Height of Ingot is the vertical distance between the top and bottom rectangular faces of the Ingot.
Larger Rectangular Length of Ingot - (Measured in Meter) - Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot.
Smaller Rectangular Length of Ingot - (Measured in Meter) - Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.

STEP 1: Convert Input(s) to Base Unit

Height of Ingot: 40 Meter --> 40 Meter No Conversion Required
Larger Rectangular Length of Ingot: 50 Meter --> 50 Meter No Conversion Required
Smaller Rectangular Length of Ingot: 20 Meter --> 20 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_Slant(Width) = sqrt(h^2+((l_{Large Rectangle}-l_{Small Rectangle})^2)/4) --> sqrt(40^2+((50-20)^2)/4)

Evaluating ... ...

h_Slant(Width) = 42.7200187265877

STEP 3: Convert Result to Output's Unit

42.7200187265877 Meter --> No Conversion Required

FINAL ANSWER

42.7200187265877 ≈ 42.72002 Meter <-- Slant Height at Rectangular Widths of Ingot

(Calculation completed in 00.008 seconds)

You are here -

Home » Math » Geometry » 3D Geometry » Ingot » Slant Height of Ingot » Slant Height at Rectangular Widths of Ingot

Credits

Created by Shweta Patil

Walchand College of Engineering (WCE), Sangli

Shweta Patil has created this Calculator and 2500+ more calculators!

Verified by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has verified this Calculator and 1800+ more calculators!

< Slant Height of Ingot Calculators

Slant Height at Rectangular Widths of Ingot

LaTeX Go Slant Height at Rectangular Widths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4)

Slant Height at Rectangular Lengths of Ingot

LaTeX Go Slant Height at Rectangular Lengths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4)

Slant Height at Rectangular Widths of Ingot Formula

LaTeX Go

What is Ingot?

A polyhedron shaped like an Ingot is made of two regularly opposite, parallel rectangles. These have the same ratio of length and width and are connected at their corners. It has 6 faces (2 rectangles, 4 isosceles trapezoids), 12 edges and 8 vertices.

How to Calculate Slant Height at Rectangular Widths of Ingot?

Slant Height at Rectangular Widths of Ingot calculator uses Slant Height at Rectangular Widths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4) to calculate the Slant Height at Rectangular Widths of Ingot, Slant Height at Rectangular Widths of Ingot formula is defined as the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot. Slant Height at Rectangular Widths of Ingot is denoted by h_Slant(Width) symbol.

How to calculate Slant Height at Rectangular Widths of Ingot using this online calculator? To use this online calculator for Slant Height at Rectangular Widths of Ingot, enter Height of Ingot (h), Larger Rectangular Length of Ingot (l_{Large Rectangle}) & Smaller Rectangular Length of Ingot (l_{Small Rectangle}) and hit the calculate button. Here is how the Slant Height at Rectangular Widths of Ingot calculation can be explained with given input values -> 42.72002 = sqrt(40^2+((50-20)^2)/4).

FAQ

What is Slant Height at Rectangular Widths of Ingot?

Slant Height at Rectangular Widths of Ingot formula is defined as the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot and is represented as h_Slant(Width) = sqrt(h^2+((l_{Large Rectangle}-l_{Small Rectangle})^2)/4) or Slant Height at Rectangular Widths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4). Height of Ingot is the vertical distance between the top and bottom rectangular faces of the Ingot, Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot & Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.

How to calculate Slant Height at Rectangular Widths of Ingot?

Slant Height at Rectangular Widths of Ingot formula is defined as the height of slanted trapezoidal faces which connects the widths of top and bottom rectangular faces of the Ingot is calculated using Slant Height at Rectangular Widths of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4). To calculate Slant Height at Rectangular Widths of Ingot, you need Height of Ingot (h), Larger Rectangular Length of Ingot (l_{Large Rectangle}) & Smaller Rectangular Length of Ingot (l_{Small Rectangle}). With our tool, you need to enter the respective value for Height of Ingot, Larger Rectangular Length of Ingot & Smaller Rectangular Length of Ingot and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search