LCM of two numbers

Size of Output Signal Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics and Instrumentation Chemical Engineering Civil Electrical More >>

⤿

Transducers Electrical Instrumentation Instrument Analysis Measurement of Magnetic Parameters More >>

✖Signal to Noise Ratio of Output Signal is defined as a measure that compares the level of the desired signal to the level of background noise.ⓘ Signal to Noise Ratio of Output Signal [snr]			+10% -10%
✖Transducer Detectivity is the detectivity normalized to a unit detector area and detection bandwidth.ⓘ Transducer Detectivity [D_t]			+10% -10%

✖Output Signal Size is an amplified replica of the input signal which is accepted by a linear amplifier.ⓘ Size of Output Signal [V]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transducers Formulas PDF PDF Image

Size of Output Signal Solution

STEP 0: Pre-Calculation Summary

Formula Used

Output Signal Size = Signal to Noise Ratio of Output Signal/Transducer Detectivity
V = snr/D_t
This formula uses 3 Variables

Variables Used

Output Signal Size - (Measured in Volt) - Output Signal Size is an amplified replica of the input signal which is accepted by a linear amplifier.
Signal to Noise Ratio of Output Signal - Signal to Noise Ratio of Output Signal is defined as a measure that compares the level of the desired signal to the level of background noise.
Transducer Detectivity - Transducer Detectivity is the detectivity normalized to a unit detector area and detection bandwidth.

STEP 1: Convert Input(s) to Base Unit

Signal to Noise Ratio of Output Signal: 15 --> No Conversion Required
Transducer Detectivity: 1.375 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = snr/D_t --> 15/1.375

Evaluating ... ...

V = 10.9090909090909

STEP 3: Convert Result to Output's Unit

10.9090909090909 Volt --> No Conversion Required

FINAL ANSWER

10.9090909090909 ≈ 10.90909 Volt <-- Output Signal Size

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics and Instrumentation » Transducers » Size of Output Signal

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Transducers Calculators

Capacitance of Transducer

LaTeX Go Transducer Capacitance = Current Generator Capacitance-(Amplifier Capacitance+Cable Capacitance)

Current Generator Capacitance

LaTeX Go Current Generator Capacitance = Transducer Capacitance+Amplifier Capacitance+Cable Capacitance

Sensitivity of Photoresistive Transducer

LaTeX Go Photoresistive Transducer Sensitivity = Resistance Change/Irradiation Change

Change in Resistance

LaTeX Go Resistance Change = Irradiation Change*Photoresistive Transducer Sensitivity

Size of Output Signal Formula

LaTeX Go

Output Signal Size = Signal to Noise Ratio of Output Signal/Transducer Detectivity
V = snr/D_t

What are the two types of transducers?

There are two main types of transducers based on whether or not they need an external power source. These are active and passive transducers.

How to Calculate Size of Output Signal?

Size of Output Signal calculator uses Output Signal Size = Signal to Noise Ratio of Output Signal/Transducer Detectivity to calculate the Output Signal Size, The Size of Output Signal formula is defined as the magnitude or amplitude of the signal produced by the transducer. This size is determined by the signal-to-noise ratio (SNR) of the output signal, which measures the clarity of the signal relative to background noise, and the detectivity of the transducer, which measures its ability to detect weak signals amidst noise. Output Signal Size is denoted by V symbol.

How to calculate Size of Output Signal using this online calculator? To use this online calculator for Size of Output Signal, enter Signal to Noise Ratio of Output Signal (snr) & Transducer Detectivity (D_t) and hit the calculate button. Here is how the Size of Output Signal calculation can be explained with given input values -> 10.90909 = 15/1.375.

FAQ

What is Size of Output Signal?

The Size of Output Signal formula is defined as the magnitude or amplitude of the signal produced by the transducer. This size is determined by the signal-to-noise ratio (SNR) of the output signal, which measures the clarity of the signal relative to background noise, and the detectivity of the transducer, which measures its ability to detect weak signals amidst noise and is represented as V = snr/D_t or Output Signal Size = Signal to Noise Ratio of Output Signal/Transducer Detectivity. Signal to Noise Ratio of Output Signal is defined as a measure that compares the level of the desired signal to the level of background noise & Transducer Detectivity is the detectivity normalized to a unit detector area and detection bandwidth.

How to calculate Size of Output Signal?

The Size of Output Signal formula is defined as the magnitude or amplitude of the signal produced by the transducer. This size is determined by the signal-to-noise ratio (SNR) of the output signal, which measures the clarity of the signal relative to background noise, and the detectivity of the transducer, which measures its ability to detect weak signals amidst noise is calculated using Output Signal Size = Signal to Noise Ratio of Output Signal/Transducer Detectivity. To calculate Size of Output Signal, you need Signal to Noise Ratio of Output Signal (snr) & Transducer Detectivity (D_t). With our tool, you need to enter the respective value for Signal to Noise Ratio of Output Signal & Transducer Detectivity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search