Signal Voltage of Amplifier Calculator

✖Input Voltage is the voltage applied by a source from the input terminal.ⓘ Input Voltage [V_in]			+10% -10%
✖The input resistance is the resistance seen by the current source or voltage source which drives the circuit.ⓘ Input Resistance [R_in]			+10% -10%
✖Signal Resistance is the resistance which is fed with the signal voltage source to an amplifier.ⓘ Signal Resistance [R_si]			+10% -10%

✖Signal Voltage refers to the voltage of the input signal that the amplifier is designed to amplify. It is typically measured in volts (V).ⓘ Signal Voltage of Amplifier [V_si]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Amplifier Characteristics Formulas PDF PDF Image

Signal Voltage of Amplifier Solution

STEP 0: Pre-Calculation Summary

Formula Used

Signal Voltage = Input Voltage*((Input Resistance+Signal Resistance)/Input Resistance)
V_si = V_in*((R_in+R_si)/R_in)
This formula uses 4 Variables

Variables Used

Signal Voltage - (Measured in Volt) - Signal Voltage refers to the voltage of the input signal that the amplifier is designed to amplify. It is typically measured in volts (V).
Input Voltage - (Measured in Volt) - Input Voltage is the voltage applied by a source from the input terminal.
Input Resistance - (Measured in Ohm) - The input resistance is the resistance seen by the current source or voltage source which drives the circuit.
Signal Resistance - (Measured in Ohm) - Signal Resistance is the resistance which is fed with the signal voltage source to an amplifier.

STEP 1: Convert Input(s) to Base Unit

Input Voltage: 9.57 Volt --> 9.57 Volt No Conversion Required
Input Resistance: 28 Kilohm --> 28000 Ohm (Check conversion here)
Signal Resistance: 1.25 Kilohm --> 1250 Ohm (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_si = V_in*((R_in+R_si)/R_in) --> 9.57*((28000+1250)/28000)

Evaluating ... ...

V_si = 9.99723214285714

STEP 3: Convert Result to Output's Unit

9.99723214285714 Volt --> No Conversion Required

FINAL ANSWER

9.99723214285714 ≈ 9.997232 Volt <-- Signal Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Amplifier Characteristics » Signal Voltage of Amplifier

Credits

Created by Devyaani Garg

Shiv Nadar University (SNU), Greater Noida

Devyaani Garg has created this Calculator and 50+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Amplifier Characteristics Calculators

Base Junction Width of Amplifier

LaTeX Go Base Junction Width = (Base Emitter Area*[Charge-e]*Electron Diffusivity*Thermal Equilibrium Concentration)/Saturation Current

Differential Voltage in Amplifier

LaTeX Go Differential Input Signal = Output Voltage/((Resistance 4/Resistance 3)*(1+(Resistance 2)/Resistance 1))

Current Gain of Amplifier

LaTeX Go Current Gain = Output Current/Input Current

Power Gain of Amplifier

LaTeX Go Power Gain = Load Power/Input Power

Signal Voltage of Amplifier Formula

LaTeX Go

Signal Voltage = Input Voltage*((Input Resistance+Signal Resistance)/Input Resistance)
V_si = V_in*((R_in+R_si)/R_in)

What are the applications of Amplifier?

Amplifiers are used in a wide range of applications, including audio equipment, radio transmitters, and medical devices such as pacemakers and hearing aids. They are also used in many industrial and scientific applications, such as radio frequency (RF) amplification and spectroscopy. Additionally, amplifiers are essential in modern communication systems, including mobile phones, radios, and satellite communications.

How to Calculate Signal Voltage of Amplifier?

Signal Voltage of Amplifier calculator uses Signal Voltage = Input Voltage*((Input Resistance+Signal Resistance)/Input Resistance) to calculate the Signal Voltage, The Signal Voltage of Amplifier is the voltage difference between the input and output signals, relative to a neutral or zero reference point. It represents the magnitude of the signal being amplified. Signal Voltage is denoted by V_si symbol.

How to calculate Signal Voltage of Amplifier using this online calculator? To use this online calculator for Signal Voltage of Amplifier, enter Input Voltage (V_in), Input Resistance (R_in) & Signal Resistance (R_si) and hit the calculate button. Here is how the Signal Voltage of Amplifier calculation can be explained with given input values -> 9.997232 = 9.57*((28000+1250)/28000).

FAQ

What is Signal Voltage of Amplifier?

The Signal Voltage of Amplifier is the voltage difference between the input and output signals, relative to a neutral or zero reference point. It represents the magnitude of the signal being amplified and is represented as V_si = V_in*((R_in+R_si)/R_in) or Signal Voltage = Input Voltage*((Input Resistance+Signal Resistance)/Input Resistance). Input Voltage is the voltage applied by a source from the input terminal, The input resistance is the resistance seen by the current source or voltage source which drives the circuit & Signal Resistance is the resistance which is fed with the signal voltage source to an amplifier.

How to calculate Signal Voltage of Amplifier?

The Signal Voltage of Amplifier is the voltage difference between the input and output signals, relative to a neutral or zero reference point. It represents the magnitude of the signal being amplified is calculated using Signal Voltage = Input Voltage*((Input Resistance+Signal Resistance)/Input Resistance). To calculate Signal Voltage of Amplifier, you need Input Voltage (V_in), Input Resistance (R_in) & Signal Resistance (R_si). With our tool, you need to enter the respective value for Input Voltage, Input Resistance & Signal Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search