Sidewall Perimeter of Source Diffusion Calculator

✖Transition Width is defined as the increase in width when drain-to-source voltage increases, resulting the triode region transitioning to the saturation region.ⓘ Transition Width [W]			+10% -10%
✖Length of Source is defined as the total length observed at the source junction of the MOSFET.ⓘ Length of Source [D_s]			+10% -10%

✖Sidewall Perimeter of Source Diffusion is defined as perimeter of source diffusion not including edge under gate.ⓘ Sidewall Perimeter of Source Diffusion [P_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download CMOS Circuit Characteristics Formulas PDF PDF Image

Sidewall Perimeter of Source Diffusion Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sidewall Perimeter of Source Diffusion = (2*Transition Width)+(2*Length of Source)
P_s = (2*W)+(2*D_s)
This formula uses 3 Variables

Variables Used

Sidewall Perimeter of Source Diffusion - (Measured in Meter) - Sidewall Perimeter of Source Diffusion is defined as perimeter of source diffusion not including edge under gate.
Transition Width - (Measured in Meter) - Transition Width is defined as the increase in width when drain-to-source voltage increases, resulting the triode region transitioning to the saturation region.
Length of Source - (Measured in Meter) - Length of Source is defined as the total length observed at the source junction of the MOSFET.

STEP 1: Convert Input(s) to Base Unit

Transition Width: 89.82 Millimeter --> 0.08982 Meter (Check conversion here)
Length of Source: 61 Millimeter --> 0.061 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_s = (2*W)+(2*D_s) --> (2*0.08982)+(2*0.061)

Evaluating ... ...

P_s = 0.30164

STEP 3: Convert Result to Output's Unit

0.30164 Meter -->301.64 Millimeter (Check conversion here)

FINAL ANSWER

301.64 Millimeter <-- Sidewall Perimeter of Source Diffusion

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » CMOS Design and Applications » CMOS Circuit Characteristics » Sidewall Perimeter of Source Diffusion

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< CMOS Circuit Characteristics Calculators

CMOS Critical Voltage

LaTeX Go Critical Voltage in CMOS = Critical Electric Field*Mean Free Path

CMOS Mean Free Path

LaTeX Go Mean Free Path = Critical Voltage in CMOS/Critical Electric Field

Width of Source Diffusion

LaTeX Go Transition Width = Area of Source Diffusion/Length of Source

Area of Source Diffusion

LaTeX Go Area of Source Diffusion = Length of Source*Transition Width

Sidewall Perimeter of Source Diffusion Formula

LaTeX Go

Sidewall Perimeter of Source Diffusion = (2*Transition Width)+(2*Length of Source)
P_s = (2*W)+(2*D_s)

What is MOS diffusion capacitance model?

The p–n junction between the source diffusion and the body contributes parasitic capacitance across the depletion region. The capacitance depends on both the area AS and sidewall perimeter PS of the source diffusion region. Because the depletion region thickness depends on the bias conditions, these parasitics are nonlinear.

How to Calculate Sidewall Perimeter of Source Diffusion?

Sidewall Perimeter of Source Diffusion calculator uses Sidewall Perimeter of Source Diffusion = (2*Transition Width)+(2*Length of Source) to calculate the Sidewall Perimeter of Source Diffusion, The Sidewall Perimeter of Source Diffusion formula is defined as perimeter of source diffusion not including edge under gate. Sidewall Perimeter of Source Diffusion is denoted by P_s symbol.

How to calculate Sidewall Perimeter of Source Diffusion using this online calculator? To use this online calculator for Sidewall Perimeter of Source Diffusion, enter Transition Width (W) & Length of Source (D_s) and hit the calculate button. Here is how the Sidewall Perimeter of Source Diffusion calculation can be explained with given input values -> 301640 = (2*0.08982)+(2*0.061).

FAQ

What is Sidewall Perimeter of Source Diffusion?

The Sidewall Perimeter of Source Diffusion formula is defined as perimeter of source diffusion not including edge under gate and is represented as P_s = (2*W)+(2*D_s) or Sidewall Perimeter of Source Diffusion = (2*Transition Width)+(2*Length of Source). Transition Width is defined as the increase in width when drain-to-source voltage increases, resulting the triode region transitioning to the saturation region & Length of Source is defined as the total length observed at the source junction of the MOSFET.

How to calculate Sidewall Perimeter of Source Diffusion?

The Sidewall Perimeter of Source Diffusion formula is defined as perimeter of source diffusion not including edge under gate is calculated using Sidewall Perimeter of Source Diffusion = (2*Transition Width)+(2*Length of Source). To calculate Sidewall Perimeter of Source Diffusion, you need Transition Width (W) & Length of Source (D_s). With our tool, you need to enter the respective value for Transition Width & Length of Source and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search