Shrinkage Factor using Compacted Volume of Soil Solution

STEP 0: Pre-Calculation Summary
Formula Used
Shrinkage Factor = (Compacted Volume/Original volume of Soil)
S = (Vc/VO)
This formula uses 3 Variables
Variables Used
Shrinkage Factor - Shrinkage Factor is the specific volume change of soil relative to its water content and is mainly due to clay swelling properties.
Compacted Volume - (Measured in Cubic Meter) - Compacted Volume is the volume of soil after compaction that done on excavated soil.
Original volume of Soil - (Measured in Cubic Meter) - Original volume of Soil is the volume of soil before excavation.
STEP 1: Convert Input(s) to Base Unit
Compacted Volume: 11 Cubic Meter --> 11 Cubic Meter No Conversion Required
Original volume of Soil: 22 Cubic Meter --> 22 Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
S = (Vc/VO) --> (11/22)
Evaluating ... ...
S = 0.5
STEP 3: Convert Result to Output's Unit
0.5 --> No Conversion Required
FINAL ANSWER
0.5 <-- Shrinkage Factor
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Mridul Sharma
Indian Institute of Information Technology (IIIT), Bhopal
Mridul Sharma has verified this Calculator and 1700+ more calculators!

Earth Quantities Hauled Calculators

Original Volume of Soil before Excavation given Percent Swell
​ LaTeX ​ Go Original volume of Soil = (100/(100+0.01*Swell in Soil))*Loaded Volume
Loaded Volume of Soil given Original Volume of Soil
​ LaTeX ​ Go Loaded Volume = (Original volume of Soil/Load Factor)
Load Factor given Original Volume of Soil
​ LaTeX ​ Go Load Factor = (Original volume of Soil/Loaded Volume)
Original Volume of Soil before Excavation
​ LaTeX ​ Go Original volume of Soil = Loaded Volume*Load Factor

Shrinkage Factor using Compacted Volume of Soil Formula

​LaTeX ​Go
Shrinkage Factor = (Compacted Volume/Original volume of Soil)
S = (Vc/VO)

What is Shrinkage Factor?

The shrinkage factor indicates the reduction in volume of soil from the borrow pit stage to the final compacted stage, while the bulkage factor accounts for the increase in volume of the soil between the pit and the loose state in the truck.

How to Calculate Shrinkage Factor using Compacted Volume of Soil?

Shrinkage Factor using Compacted Volume of Soil calculator uses Shrinkage Factor = (Compacted Volume/Original volume of Soil) to calculate the Shrinkage Factor, The Shrinkage Factor using Compacted Volume of Soil formula is defined as the ratio between the volume of soil after compaction (compacted volume) and the volume of soil after it has fully dried and stabilized (shrinkage volume). Shrinkage Factor is denoted by S symbol.

How to calculate Shrinkage Factor using Compacted Volume of Soil using this online calculator? To use this online calculator for Shrinkage Factor using Compacted Volume of Soil, enter Compacted Volume (Vc) & Original volume of Soil (VO) and hit the calculate button. Here is how the Shrinkage Factor using Compacted Volume of Soil calculation can be explained with given input values -> 0.681818 = (11/22).

FAQ

What is Shrinkage Factor using Compacted Volume of Soil?
The Shrinkage Factor using Compacted Volume of Soil formula is defined as the ratio between the volume of soil after compaction (compacted volume) and the volume of soil after it has fully dried and stabilized (shrinkage volume) and is represented as S = (Vc/VO) or Shrinkage Factor = (Compacted Volume/Original volume of Soil). Compacted Volume is the volume of soil after compaction that done on excavated soil & Original volume of Soil is the volume of soil before excavation.
How to calculate Shrinkage Factor using Compacted Volume of Soil?
The Shrinkage Factor using Compacted Volume of Soil formula is defined as the ratio between the volume of soil after compaction (compacted volume) and the volume of soil after it has fully dried and stabilized (shrinkage volume) is calculated using Shrinkage Factor = (Compacted Volume/Original volume of Soil). To calculate Shrinkage Factor using Compacted Volume of Soil, you need Compacted Volume (Vc) & Original volume of Soil (VO). With our tool, you need to enter the respective value for Compacted Volume & Original volume of Soil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!