Short Diagonal of Trapezoid given Area and Long Diagonal Calculator

✖Area of Trapezoid is the total quantity of plane enclosed by the boundary of the Trapezoid.ⓘ Area of Trapezoid [A]			+10% -10%
✖Long Diagonal of Trapezoid is the length of the line joining the corners of smaller acute angle and smaller obtuse angle of the Trapezoid.ⓘ Long Diagonal of Trapezoid [d_Long]			+10% -10%
✖Leg Angle between Diagonals of Trapezoid is the angle made by the diagonals of the Trapezoid which is near to any of the pair of non parallel and opposite legs of the Trapezoid.ⓘ Leg Angle between Diagonals of Trapezoid [∠_d(Leg)]			+10% -10%

✖Short Diagonal of Trapezoid is the length of the line joining the corners of larger acute angle and larger obtuse angle of the Trapezoid.ⓘ Short Diagonal of Trapezoid given Area and Long Diagonal [d_Short]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Trapezoid Formula PDF PDF Image

Short Diagonal of Trapezoid given Area and Long Diagonal Solution

STEP 0: Pre-Calculation Summary

Formula Used

Short Diagonal of Trapezoid = (2*Area of Trapezoid)/(Long Diagonal of Trapezoid*sin(Leg Angle between Diagonals of Trapezoid))
d_Short = (2*A)/(d_Long*sin(∠_d(Leg)))
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Short Diagonal of Trapezoid - (Measured in Meter) - Short Diagonal of Trapezoid is the length of the line joining the corners of larger acute angle and larger obtuse angle of the Trapezoid.
Area of Trapezoid - (Measured in Square Meter) - Area of Trapezoid is the total quantity of plane enclosed by the boundary of the Trapezoid.
Long Diagonal of Trapezoid - (Measured in Meter) - Long Diagonal of Trapezoid is the length of the line joining the corners of smaller acute angle and smaller obtuse angle of the Trapezoid.
Leg Angle between Diagonals of Trapezoid - (Measured in Radian) - Leg Angle between Diagonals of Trapezoid is the angle made by the diagonals of the Trapezoid which is near to any of the pair of non parallel and opposite legs of the Trapezoid.

STEP 1: Convert Input(s) to Base Unit

Area of Trapezoid: 85 Square Meter --> 85 Square Meter No Conversion Required
Long Diagonal of Trapezoid: 14 Meter --> 14 Meter No Conversion Required
Leg Angle between Diagonals of Trapezoid: 80 Degree --> 1.3962634015952 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_Short = (2*A)/(d_Long*sin(∠_d(Leg))) --> (2*85)/(14*sin(1.3962634015952))

Evaluating ... ...

d_Short = 12.3301802871846

STEP 3: Convert Result to Output's Unit

12.3301802871846 Meter --> No Conversion Required

FINAL ANSWER

12.3301802871846 ≈ 12.33018 Meter <-- Short Diagonal of Trapezoid

(Calculation completed in 00.007 seconds)

You are here -

Home » Math » Geometry » 2D Geometry » Trapezoid » Diagonal of Trapezoid » Short Diagonal of Trapezoid » Short Diagonal of Trapezoid given Area and Long Diagonal

Credits

Created by Mona Gladys

St Joseph's College (SJC), Bengaluru

Mona Gladys has created this Calculator and 2000+ more calculators!

Verified by Aditya Ranjan

Indian Institute of Technology (IIT), Mumbai

Aditya Ranjan has verified this Calculator and 50+ more calculators!

< Short Diagonal of Trapezoid Calculators

Short Diagonal of Trapezoid given all Sides

LaTeX Go Short Diagonal of Trapezoid = sqrt(Long Leg of Trapezoid^2+(Short Base of Trapezoid*Long Base of Trapezoid)-(Long Base of Trapezoid*(Long Leg of Trapezoid^2-Short Leg of Trapezoid^2)/(Long Base of Trapezoid-Short Base of Trapezoid)))

Short Diagonal of Trapezoid given Short Leg

LaTeX Go Short Diagonal of Trapezoid = sqrt(Short Base of Trapezoid^2+Short Leg of Trapezoid^2-(2*Short Base of Trapezoid*Short Leg of Trapezoid*cos(Smaller Obtuse Angle of Trapezoid)))

Short Diagonal of Trapezoid

LaTeX Go Short Diagonal of Trapezoid = sqrt(Long Base of Trapezoid^2+Long Leg of Trapezoid^2-(2*Long Base of Trapezoid*Long Leg of Trapezoid*cos(Smaller Acute Angle of Trapezoid)))

Short Diagonal of Trapezoid given Height

LaTeX Go Short Diagonal of Trapezoid = sqrt(Height of Trapezoid^2+(Long Base of Trapezoid-(Height of Trapezoid*cot(Smaller Acute Angle of Trapezoid)))^2)

Short Diagonal of Trapezoid given Area and Long Diagonal Formula

LaTeX Go

Short Diagonal of Trapezoid = (2*Area of Trapezoid)/(Long Diagonal of Trapezoid*sin(Leg Angle between Diagonals of Trapezoid))
d_Short = (2*A)/(d_Long*sin(∠_d(Leg)))

What is a Trapezoid?

Trapezoid is a quadrilateral with one pair of opposite and parallel sides. The pair of parallel sides is called the bases of the Trapezoid and the pair of non parallel edges is called the legs of the Trapezoid. Out of the four angles, in general a Trapezoid has 2 acute angles and 2 obtuse angles which are pairwise supplementary angles.

How to Calculate Short Diagonal of Trapezoid given Area and Long Diagonal?

Short Diagonal of Trapezoid given Area and Long Diagonal calculator uses Short Diagonal of Trapezoid = (2*Area of Trapezoid)/(Long Diagonal of Trapezoid*sin(Leg Angle between Diagonals of Trapezoid)) to calculate the Short Diagonal of Trapezoid, Short Diagonal of Trapezoid given Area and Long Diagonal formula is defined as the length of the line joining the corners of larger acute angle and larger obtuse angle of the Trapezoid, and calculated using area, and long diagonal of the Trapezoid. Short Diagonal of Trapezoid is denoted by d_Short symbol.

How to calculate Short Diagonal of Trapezoid given Area and Long Diagonal using this online calculator? To use this online calculator for Short Diagonal of Trapezoid given Area and Long Diagonal, enter Area of Trapezoid (A), Long Diagonal of Trapezoid (d_Long) & Leg Angle between Diagonals of Trapezoid (∠_d(Leg)) and hit the calculate button. Here is how the Short Diagonal of Trapezoid given Area and Long Diagonal calculation can be explained with given input values -> 12.33018 = (2*85)/(14*sin(1.3962634015952)).

FAQ

What is Short Diagonal of Trapezoid given Area and Long Diagonal?

Short Diagonal of Trapezoid given Area and Long Diagonal formula is defined as the length of the line joining the corners of larger acute angle and larger obtuse angle of the Trapezoid, and calculated using area, and long diagonal of the Trapezoid and is represented as d_Short = (2*A)/(d_Long*sin(∠_d(Leg))) or Short Diagonal of Trapezoid = (2*Area of Trapezoid)/(Long Diagonal of Trapezoid*sin(Leg Angle between Diagonals of Trapezoid)). Area of Trapezoid is the total quantity of plane enclosed by the boundary of the Trapezoid, Long Diagonal of Trapezoid is the length of the line joining the corners of smaller acute angle and smaller obtuse angle of the Trapezoid & Leg Angle between Diagonals of Trapezoid is the angle made by the diagonals of the Trapezoid which is near to any of the pair of non parallel and opposite legs of the Trapezoid.

How to calculate Short Diagonal of Trapezoid given Area and Long Diagonal?

Short Diagonal of Trapezoid given Area and Long Diagonal formula is defined as the length of the line joining the corners of larger acute angle and larger obtuse angle of the Trapezoid, and calculated using area, and long diagonal of the Trapezoid is calculated using Short Diagonal of Trapezoid = (2*Area of Trapezoid)/(Long Diagonal of Trapezoid*sin(Leg Angle between Diagonals of Trapezoid)). To calculate Short Diagonal of Trapezoid given Area and Long Diagonal, you need Area of Trapezoid (A), Long Diagonal of Trapezoid (d_Long) & Leg Angle between Diagonals of Trapezoid (∠_d(Leg)). With our tool, you need to enter the respective value for Area of Trapezoid, Long Diagonal of Trapezoid & Leg Angle between Diagonals of Trapezoid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Short Diagonal of Trapezoid?

In this formula, Short Diagonal of Trapezoid uses Area of Trapezoid, Long Diagonal of Trapezoid & Leg Angle between Diagonals of Trapezoid. We can use 3 other way(s) to calculate the same, which is/are as follows -

Short Diagonal of Trapezoid = sqrt(Long Base of Trapezoid^2+Long Leg of Trapezoid^2-(2*Long Base of Trapezoid*Long Leg of Trapezoid*cos(Smaller Acute Angle of Trapezoid)))
Short Diagonal of Trapezoid = sqrt(Short Base of Trapezoid^2+Short Leg of Trapezoid^2-(2*Short Base of Trapezoid*Short Leg of Trapezoid*cos(Smaller Obtuse Angle of Trapezoid)))
Short Diagonal of Trapezoid = sqrt(Long Leg of Trapezoid^2+(Short Base of Trapezoid*Long Base of Trapezoid)-(Long Base of Trapezoid*(Long Leg of Trapezoid^2-Short Leg of Trapezoid^2)/(Long Base of Trapezoid-Short Base of Trapezoid)))

Home

FREE PDFs

🔍 Search