Short-Circuit Power in CMOS Calculator

✖The Dynamic Power is calculated during the rise and fall of the input signal. These are smaller then the dynamic power dissipation.ⓘ Dynamic Power [P_dyn]			+10% -10%
✖Switching Power is called the dynamic power because it arises from the switching of the load.ⓘ Switching Power [P_s]			+10% -10%

✖Short-Circuit Power is defined as the theoretical current that will run in the event of a short circuit if the protection has not yet intervened.ⓘ Short-Circuit Power in CMOS [P_sc]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download CMOS Power Metrics Formulas PDF PDF Image

Short-Circuit Power in CMOS Solution

STEP 0: Pre-Calculation Summary

Formula Used

Short-Circuit Power = Dynamic Power-Switching Power
P_sc = P_dyn-P_s
This formula uses 3 Variables

Variables Used

Short-Circuit Power - (Measured in Watt) - Short-Circuit Power is defined as the theoretical current that will run in the event of a short circuit if the protection has not yet intervened.
Dynamic Power - (Measured in Watt) - The Dynamic Power is calculated during the rise and fall of the input signal. These are smaller then the dynamic power dissipation.
Switching Power - (Measured in Watt) - Switching Power is called the dynamic power because it arises from the switching of the load.

STEP 1: Convert Input(s) to Base Unit

Dynamic Power: 46.13 Milliwatt --> 0.04613 Watt (Check conversion here)
Switching Power: 0.13 Milliwatt --> 0.00013 Watt (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_sc = P_dyn-P_s --> 0.04613-0.00013

Evaluating ... ...

P_sc = 0.046

STEP 3: Convert Result to Output's Unit

0.046 Watt -->46 Milliwatt (Check conversion here)

FINAL ANSWER

46 Milliwatt <-- Short-Circuit Power

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » CMOS Design and Applications » CMOS Power Metrics » Short-Circuit Power in CMOS

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< CMOS Power Metrics Calculators

Activity Factor

LaTeX Go Activity Factor = Switching Power/(Capacitance*Base Collector Voltage^2*Frequency)

Switching Power

LaTeX Go Switching Power = Activity Factor*(Capacitance*Base Collector Voltage^2*Frequency)

Short-Circuit Power in CMOS

LaTeX Go Short-Circuit Power = Dynamic Power-Switching Power

Dynamic Power in CMOS

LaTeX Go Dynamic Power = Short-Circuit Power+Switching Power

Short-Circuit Power in CMOS Formula

LaTeX Go

Short-Circuit Power = Dynamic Power-Switching Power
P_sc = P_dyn-P_s

What is the sources of power dissipation?

Power dissipation in CMOS circuits comes from two components. They are Dynamic dissipation and Static dissipation. Putting this together gives the total power of a circuit i.e the dynamic power.

How to Calculate Short-Circuit Power in CMOS?

Short-Circuit Power in CMOS calculator uses Short-Circuit Power = Dynamic Power-Switching Power to calculate the Short-Circuit Power, The Short-Circuit Power in CMOS formula is defined as the theoretical current that will run in the event of a short circuit if the protection has not yet intervened. This theoretical short-circuit current at the point of the voltage junction depends on the impedance of the voltage source. Short-Circuit Power is denoted by P_sc symbol.

How to calculate Short-Circuit Power in CMOS using this online calculator? To use this online calculator for Short-Circuit Power in CMOS, enter Dynamic Power (P_dyn) & Switching Power (P_s) and hit the calculate button. Here is how the Short-Circuit Power in CMOS calculation can be explained with given input values -> 95770 = 0.04613-0.00013.

FAQ

What is Short-Circuit Power in CMOS?

The Short-Circuit Power in CMOS formula is defined as the theoretical current that will run in the event of a short circuit if the protection has not yet intervened. This theoretical short-circuit current at the point of the voltage junction depends on the impedance of the voltage source and is represented as P_sc = P_dyn-P_s or Short-Circuit Power = Dynamic Power-Switching Power. The Dynamic Power is calculated during the rise and fall of the input signal. These are smaller then the dynamic power dissipation & Switching Power is called the dynamic power because it arises from the switching of the load.

How to calculate Short-Circuit Power in CMOS?

The Short-Circuit Power in CMOS formula is defined as the theoretical current that will run in the event of a short circuit if the protection has not yet intervened. This theoretical short-circuit current at the point of the voltage junction depends on the impedance of the voltage source is calculated using Short-Circuit Power = Dynamic Power-Switching Power. To calculate Short-Circuit Power in CMOS, you need Dynamic Power (P_dyn) & Switching Power (P_s). With our tool, you need to enter the respective value for Dynamic Power & Switching Power and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search