Sheer Yield Strength Calculator

✖Width is the measurement or extent of something from side to side.ⓘ Width [w]			+10% -10%
✖Feed is the rate at which a cutter moves through material.ⓘ Feed [F_cutter]			+10% -10%
✖Shear Angle is the angle between the shear plane and the cutting velocity.ⓘ Shear Angle [SA]			+10% -10%

✖Shear Yield Strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear.ⓘ Sheer Yield Strength [S_sy]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Sheer Yield Strength Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Yield Strength = Width*Feed*cosec(Shear Angle)
S_sy = w*F_cutter*cosec(SA)
This formula uses 2 Functions, 4 Variables

Functions Used

sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)
cosec - The cosecant function is a trigonometric function that is the reciprocal of the sine function., cosec(Angle)

Variables Used

Shear Yield Strength - (Measured in Pascal) - Shear Yield Strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear.
Width - (Measured in Meter) - Width is the measurement or extent of something from side to side.
Feed - (Measured in Meter) - Feed is the rate at which a cutter moves through material.
Shear Angle - (Measured in Radian) - Shear Angle is the angle between the shear plane and the cutting velocity.

STEP 1: Convert Input(s) to Base Unit

Width: 255 Millimeter --> 0.255 Meter (Check conversion here)
Feed: 12 Millimeter --> 0.012 Meter (Check conversion here)
Shear Angle: 15 Degree --> 0.2617993877991 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_sy = w*F_cutter*cosec(SA) --> 0.255*0.012*cosec(0.2617993877991)

Evaluating ... ...

S_sy = 0.0118229321137804

STEP 3: Convert Result to Output's Unit

0.0118229321137804 Pascal -->0.0118229321137804 Newton per Square Meter (Check conversion here)

FINAL ANSWER

0.0118229321137804 ≈ 0.011823 Newton per Square Meter <-- Shear Yield Strength

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Manufacturing » Metal Cutting » Sheer Yield Strength

Credits

Created by Anirudh Singh

National Institute of Technology (NIT), Jamshedpur

Anirudh Singh has created this Calculator and 300+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Metal Cutting Calculators

Shear Plane Angle

LaTeX Go Shear Angle Metal = arctan((Chip Ratio*cos(Rake Angle))/(1-Chip Ratio*sin(Rake Angle)))

Shear Angle

LaTeX Go Shear Angle Metal = atan(Width*cos(Theta)/(1-Width*sin(Theta)))

Shear Force

LaTeX Go Shear Force = Centripetal Force*cos(Theta)-Tangential Force*sin(Theta)

Shear Strain

LaTeX Go Shear Strain = tan(Shear Angle Metal)+cot(Shear Angle Metal-Rake Angle)

Sheer Yield Strength Formula

LaTeX Go

Shear Yield Strength = Width*Feed*cosec(Shear Angle)
S_sy = w*F_cutter*cosec(SA)

What is yield stress?

Yield strength or yield stress is the material property defined as the stress at which a material begins to deform plastically whereas yield point is the point where nonlinear (elastic + plastic) deformation begins.

How to Calculate Sheer Yield Strength?

Sheer Yield Strength calculator uses Shear Yield Strength = Width*Feed*cosec(Shear Angle) to calculate the Shear Yield Strength, Sheer Yield Strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. Shear Yield Strength is denoted by S_sy symbol.

How to calculate Sheer Yield Strength using this online calculator? To use this online calculator for Sheer Yield Strength, enter Width (w), Feed (F_cutter) & Shear Angle (SA) and hit the calculate button. Here is how the Sheer Yield Strength calculation can be explained with given input values -> 0.336374 = 0.255*0.012*cosec(0.2617993877991).

FAQ

What is Sheer Yield Strength?

Sheer Yield Strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear and is represented as S_sy = w*F_cutter*cosec(SA) or Shear Yield Strength = Width*Feed*cosec(Shear Angle). Width is the measurement or extent of something from side to side, Feed is the rate at which a cutter moves through material & Shear Angle is the angle between the shear plane and the cutting velocity.

How to calculate Sheer Yield Strength?

Sheer Yield Strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear is calculated using Shear Yield Strength = Width*Feed*cosec(Shear Angle). To calculate Sheer Yield Strength, you need Width (w), Feed (F_cutter) & Shear Angle (SA). With our tool, you need to enter the respective value for Width, Feed & Shear Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search