Shear Stress in Parallel Fillet Weld Calculator

✖Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.ⓘ Load on Parallel Fillet Weld [P_f]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%

✖Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Parallel Fillet Weld [𝜏]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Parallel Fillet Welds Formulas PDF PDF Image

Shear Stress in Parallel Fillet Weld Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
𝜏 = P_f/(0.707*L*h_l)
This formula uses 4 Variables

Variables Used

Shear Stress in Parallel Fillet Weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Load on Parallel Fillet Weld - (Measured in Newton) - Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.

STEP 1: Convert Input(s) to Base Unit

Load on Parallel Fillet Weld: 111080 Newton --> 111080 Newton No Conversion Required
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

𝜏 = P_f/(0.707*L*h_l) --> 111080/(0.707*0.195*0.0212)

Evaluating ... ...

𝜏 = 38005459.2645663

STEP 3: Convert Result to Output's Unit

38005459.2645663 Pascal -->38.0054592645663 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

38.0054592645663 ≈ 38.00546 Newton per Square Millimeter <-- Shear Stress in Parallel Fillet Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Parallel Fillet Welds » Shear Stress in Parallel Fillet Weld

Credits

Created by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has created this Calculator and 50+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Parallel Fillet Welds Calculators

Shear Stress in Double Parallel Fillet Weld

LaTeX Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Leg of Parallel Fillet Weld given Throat of Weld

LaTeX Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)

Throat of Parallel Fillet Weld

LaTeX Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

< Stress in Design Calculators

Shear Stress on Circular Fillet Weld Subjected to Torsion

LaTeX Go Torsional Shear Stress = Torsional Moment in Welded Shaft/(pi*Throat Thickness of Weld*Radius of Welded Shaft^2)

Torsional Shear Stress in Bar

LaTeX Go Torsional Shear Stress = (8*Force*Mean Diameter of Coil)/(pi*Diameter of Spring Wire^3)

Shear Stress in Double Parallel Fillet Weld

LaTeX Go Shear Stress in Double Parallel Fillet Weld = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld

LaTeX Go Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Shear Stress in Parallel Fillet Weld Formula

LaTeX Go

Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
𝜏 = P_f/(0.707*L*h_l)

What is shear strength ?

In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. When a paper is cut with scissors, the paper fails in shear.

How to Calculate Shear Stress in Parallel Fillet Weld?

Shear Stress in Parallel Fillet Weld calculator uses Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld) to calculate the Shear Stress in Parallel Fillet Weld, Shear Stress in Parallel Fillet Weld is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. It is the stress in the parallel fillet weld subjected to shear. Shear Stress in Parallel Fillet Weld is denoted by 𝜏 symbol.

How to calculate Shear Stress in Parallel Fillet Weld using this online calculator? To use this online calculator for Shear Stress in Parallel Fillet Weld, enter Load on Parallel Fillet Weld (P_f), Length of Weld (L) & Leg of Weld (h_l) and hit the calculate button. Here is how the Shear Stress in Parallel Fillet Weld calculation can be explained with given input values -> 3.8E-5 = 111080/(0.707*0.195*0.0212).

FAQ

What is Shear Stress in Parallel Fillet Weld?

Shear Stress in Parallel Fillet Weld is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. It is the stress in the parallel fillet weld subjected to shear and is represented as 𝜏 = P_f/(0.707*L*h_l) or Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld). Load on Parallel Fillet Weld is the force, or the load applied perpendicular to the specimen cross-section, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Leg of Weld is the distance from the joint root to the toe of the weld.

How to calculate Shear Stress in Parallel Fillet Weld?

Shear Stress in Parallel Fillet Weld is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. It is the stress in the parallel fillet weld subjected to shear is calculated using Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld). To calculate Shear Stress in Parallel Fillet Weld, you need Load on Parallel Fillet Weld (P_f), Length of Weld (L) & Leg of Weld (h_l). With our tool, you need to enter the respective value for Load on Parallel Fillet Weld, Length of Weld & Leg of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shear Stress in Parallel Fillet Weld?

In this formula, Shear Stress in Parallel Fillet Weld uses Load on Parallel Fillet Weld, Length of Weld & Leg of Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -

Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(Length of Weld*Leg of Weld*cos(pi/4))
Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Leg of Weld)
Shear Stress in Parallel Fillet Weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)

Home

FREE PDFs

🔍 Search