Shear Stress given Axial Load on Welded Connection Solution

STEP 0: Pre-Calculation Summary
Formula Used
Shear Stress = Axial Load on Weld/((Length of Top Weld+Length of Bottom Weld)*0.707*Thickness of Plate)
𝜏 = Pweld/((Ltop weld+L2)*0.707*tplate)
This formula uses 5 Variables
Variables Used
Shear Stress - (Measured in Pascal) - Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Axial Load on Weld - (Measured in Newton) - Axial Load on Weld is defined as applying a force on a structure directly along an axis of the structure.
Length of Top Weld - (Measured in Meter) - Length of top weld is the linear distance of each weld segment.
Length of Bottom Weld - (Measured in Meter) - Length of bottom weld is the linear distance of each weld segment.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
STEP 1: Convert Input(s) to Base Unit
Axial Load on Weld: 9.6 Kilonewton --> 9600 Newton (Check conversion ​here)
Length of Top Weld: 4 Millimeter --> 0.004 Meter (Check conversion ​here)
Length of Bottom Weld: 6 Millimeter --> 0.006 Meter (Check conversion ​here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
𝜏 = Pweld/((Ltop weld+L2)*0.707*tplate) --> 9600/((0.004+0.006)*0.707*0.012)
Evaluating ... ...
𝜏 = 113154172.560113
STEP 3: Convert Result to Output's Unit
113154172.560113 Pascal -->113.154172560113 Megapascal (Check conversion ​here)
FINAL ANSWER
113.154172560113 113.1542 Megapascal <-- Shear Stress
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Weld Parameters Calculators

Total Length of Weld given Length of Top Weld
​ LaTeX ​ Go Total length of weld = (Length of Top Weld*(Distance of top weld from gravity axis+Distance of Bottom Weld from Gravity Axis))/Distance of Bottom Weld from Gravity Axis
Axial Load on Angle
​ LaTeX ​ Go Axial load on angle = Resistance of weld per unit length*(Length of Top Weld+Length of Bottom Weld)
Axial Load on Angle given Resistance of Bottom and Top Weld
​ LaTeX ​ Go Axial load on angle = Resistance of top weld+Resistance of bottom weld
Total Length of Weld given Length of Top and Bottom Weld
​ LaTeX ​ Go Total length of weld = Length of Top Weld+Length of Bottom Weld

Shear Stress given Axial Load on Welded Connection Formula

​LaTeX ​Go
Shear Stress = Axial Load on Weld/((Length of Top Weld+Length of Bottom Weld)*0.707*Thickness of Plate)
𝜏 = Pweld/((Ltop weld+L2)*0.707*tplate)

What is axial load and radial load?

Radial Load is defined as the maximum force that can be applied to the shaft in the radial direction (any direction perpendicular to the motor shaft axis). Axial Load is defined as the maximum force that can be applied to the shaft in the axial direction (in the same axis as or parallel to the motor shaft axis).

How to Calculate Shear Stress given Axial Load on Welded Connection?

Shear Stress given Axial Load on Welded Connection calculator uses Shear Stress = Axial Load on Weld/((Length of Top Weld+Length of Bottom Weld)*0.707*Thickness of Plate) to calculate the Shear Stress, Shear stress given axial load on welded connection is defined as the component of stress coplanar with a material cross-section. It arises from the shear force, the component of the force vector parallel to the material cross-section. Shear Stress is denoted by 𝜏 symbol.

How to calculate Shear Stress given Axial Load on Welded Connection using this online calculator? To use this online calculator for Shear Stress given Axial Load on Welded Connection, enter Axial Load on Weld (Pweld), Length of Top Weld (Ltop weld), Length of Bottom Weld (L2) & Thickness of Plate (tplate) and hit the calculate button. Here is how the Shear Stress given Axial Load on Welded Connection calculation can be explained with given input values -> 0.000113 = 9600/((0.004+0.006)*0.707*0.012).

FAQ

What is Shear Stress given Axial Load on Welded Connection?
Shear stress given axial load on welded connection is defined as the component of stress coplanar with a material cross-section. It arises from the shear force, the component of the force vector parallel to the material cross-section and is represented as 𝜏 = Pweld/((Ltop weld+L2)*0.707*tplate) or Shear Stress = Axial Load on Weld/((Length of Top Weld+Length of Bottom Weld)*0.707*Thickness of Plate). Axial Load on Weld is defined as applying a force on a structure directly along an axis of the structure, Length of top weld is the linear distance of each weld segment, Length of bottom weld is the linear distance of each weld segment & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.
How to calculate Shear Stress given Axial Load on Welded Connection?
Shear stress given axial load on welded connection is defined as the component of stress coplanar with a material cross-section. It arises from the shear force, the component of the force vector parallel to the material cross-section is calculated using Shear Stress = Axial Load on Weld/((Length of Top Weld+Length of Bottom Weld)*0.707*Thickness of Plate). To calculate Shear Stress given Axial Load on Welded Connection, you need Axial Load on Weld (Pweld), Length of Top Weld (Ltop weld), Length of Bottom Weld (L2) & Thickness of Plate (tplate). With our tool, you need to enter the respective value for Axial Load on Weld, Length of Top Weld, Length of Bottom Weld & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Shear Stress?
In this formula, Shear Stress uses Axial Load on Weld, Length of Top Weld, Length of Bottom Weld & Thickness of Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Shear Stress = Axial Load on Weld/(Weld Bed Area)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!