Shear Stress Correction Factor for Spring given Mean Stress Calculator

✖Mean Shear Stress in Spring is defined as the amount of mean stress acting when spring is subjected to fluctuating stress.ⓘ Mean Shear Stress in Spring [σ_m]			+10% -10%
✖Diameter of spring wire is the diameter of the wire of which a spring is made.ⓘ Diameter of spring wire [d]			+10% -10%
✖Mean Spring Force is defined as the average of the maximum force and the minimum force of the fluctuating forces on the spring or by the spring.ⓘ Mean Spring Force [P_m]			+10% -10%
✖The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.ⓘ Mean Coil Diameter of Spring [D]			+10% -10%

✖Shear Stress Correction Factor of Spring is for comparing the strain energies of the average shear stresses with those obtained from the equilibrium.ⓘ Shear Stress Correction Factor for Spring given Mean Stress [K_s]

⎘ Copy

👎

Formula

✖

Shear Stress Correction Factor for Spring given Mean Stress

Formula

K s = σ m \cdot \frac{π \cdot d^{3}}{8 \cdot P m \cdot D}

Example

1.076171 = 156 N/mm² \cdot \frac{π \cdot {4 mm}^{3}}{8 \cdot 101.2 N \cdot 36 mm}

Calculator

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF PDF Image

Shear Stress Correction Factor for Spring given Mean Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress Correction Factor of Spring = Mean Shear Stress in Spring*(pi*Diameter of spring wire^3)/(8*Mean Spring Force*Mean Coil Diameter of Spring)
K_s = σ_m*(pi*d^3)/(8*P_m*D)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Shear Stress Correction Factor of Spring - Shear Stress Correction Factor of Spring is for comparing the strain energies of the average shear stresses with those obtained from the equilibrium.
Mean Shear Stress in Spring - (Measured in Pascal) - Mean Shear Stress in Spring is defined as the amount of mean stress acting when spring is subjected to fluctuating stress.
Diameter of spring wire - (Measured in Meter) - Diameter of spring wire is the diameter of the wire of which a spring is made.
Mean Spring Force - (Measured in Newton) - Mean Spring Force is defined as the average of the maximum force and the minimum force of the fluctuating forces on the spring or by the spring.
Mean Coil Diameter of Spring - (Measured in Meter) - The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.

STEP 1: Convert Input(s) to Base Unit

Mean Shear Stress in Spring: 156 Newton per Square Millimeter --> 156000000 Pascal (Check conversion here)
Diameter of spring wire: 4 Millimeter --> 0.004 Meter (Check conversion here)
Mean Spring Force: 101.2 Newton --> 101.2 Newton No Conversion Required
Mean Coil Diameter of Spring: 36 Millimeter --> 0.036 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_s = σ_m*(pi*d^3)/(8*P_m*D) --> 156000000*(pi*0.004^3)/(8*101.2*0.036)

Evaluating ... ...

K_s = 1.07617139648662

STEP 3: Convert Result to Output's Unit

1.07617139648662 --> No Conversion Required

FINAL ANSWER

1.07617139648662 ≈ 1.076171 <-- Shear Stress Correction Factor of Spring

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Springs » Mechanical » Design Against Fluctuating Load » Shear Stress Correction Factor for Spring given Mean Stress

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Design Against Fluctuating Load Calculators

Force Amplitude of Spring

Go Spring Force Amplitude = .5*(Maximum Force of Spring-Minimum Force of Spring)

Mean Force on spring

Go Mean Spring Force = (Minimum Force of Spring+Maximum Force of Spring)/2

Maximum Force on Spring given Mean Force

Go Maximum Force of Spring = 2*Mean Spring Force-Minimum Force of Spring

Minimum Force on Spring given Mean Force

Go Minimum Force of Spring = 2*Mean Spring Force-Maximum Force of Spring

Shear Stress Correction Factor for Spring given Mean Stress Formula

Shear Stress Correction Factor of Spring = Mean Shear Stress in Spring*(pi*Diameter of spring wire^3)/(8*Mean Spring Force*Mean Coil Diameter of Spring)
K_s = σ_m*(pi*d^3)/(8*P_m*D)

Define Shear Stress Correction Factor?

shear correction factors are defined comparing the strain energies of the average shear stresses with those obtained from the equilibrium. The computed quantities are necessary to determine the shear stiffness of beams with arbitrary cross–sections.

How to Calculate Shear Stress Correction Factor for Spring given Mean Stress?

Shear Stress Correction Factor for Spring given Mean Stress calculator uses Shear Stress Correction Factor of Spring = Mean Shear Stress in Spring*(pi*Diameter of spring wire^3)/(8*Mean Spring Force*Mean Coil Diameter of Spring) to calculate the Shear Stress Correction Factor of Spring, Shear Stress Correction Factor for Spring given Mean Stress formula is defined as the comparing the strain energies of the average shear stresses with those obtained from the equilibrium. Shear Stress Correction Factor of Spring is denoted by K_s symbol.

How to calculate Shear Stress Correction Factor for Spring given Mean Stress using this online calculator? To use this online calculator for Shear Stress Correction Factor for Spring given Mean Stress, enter Mean Shear Stress in Spring (σ_m), Diameter of spring wire (d), Mean Spring Force (P_m) & Mean Coil Diameter of Spring (D) and hit the calculate button. Here is how the Shear Stress Correction Factor for Spring given Mean Stress calculation can be explained with given input values -> 1.076171 = 156000000*(pi*0.004^3)/(8*101.2*0.036).

FAQ

What is Shear Stress Correction Factor for Spring given Mean Stress?

Shear Stress Correction Factor for Spring given Mean Stress formula is defined as the comparing the strain energies of the average shear stresses with those obtained from the equilibrium and is represented as K_s = σ_m*(pi*d^3)/(8*P_m*D) or Shear Stress Correction Factor of Spring = Mean Shear Stress in Spring*(pi*Diameter of spring wire^3)/(8*Mean Spring Force*Mean Coil Diameter of Spring). Mean Shear Stress in Spring is defined as the amount of mean stress acting when spring is subjected to fluctuating stress, Diameter of spring wire is the diameter of the wire of which a spring is made, Mean Spring Force is defined as the average of the maximum force and the minimum force of the fluctuating forces on the spring or by the spring & The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.

How to calculate Shear Stress Correction Factor for Spring given Mean Stress?

Shear Stress Correction Factor for Spring given Mean Stress formula is defined as the comparing the strain energies of the average shear stresses with those obtained from the equilibrium is calculated using Shear Stress Correction Factor of Spring = Mean Shear Stress in Spring*(pi*Diameter of spring wire^3)/(8*Mean Spring Force*Mean Coil Diameter of Spring). To calculate Shear Stress Correction Factor for Spring given Mean Stress, you need Mean Shear Stress in Spring (σ_m), Diameter of spring wire (d), Mean Spring Force (P_m) & Mean Coil Diameter of Spring (D). With our tool, you need to enter the respective value for Mean Shear Stress in Spring, Diameter of spring wire, Mean Spring Force & Mean Coil Diameter of Spring and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search