Shear Stress Variation across Neutral Axis for Rectangular Section Calculator

✖Shear Force on Beam refers to the internal force that acts parallel to the cross-section of the beam is the result of external loads, reactions at supports, and the beam’s own weight.ⓘ Shear Force on Beam [V]			+10% -10%
✖Beam width at considered level refers to the width of the beam’s cross-section at the point where shear stress or other forces are being analyzed.ⓘ Beam Width at Considered Level [b]			+10% -10%
✖Depth of rectangular section is the vertical dimension of the cross-section of the beam helps in calculating various stresses and ensuring the structural integrity of the beam.ⓘ Depth of Rectangular Section [d]			+10% -10%

✖Shear stress in beam is the internal stress that arises from the application of shear force and acts parallel to the cross-section of the beam.ⓘ Shear Stress Variation across Neutral Axis for Rectangular Section [𝜏]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Shear Stress in Rectangular Section Formulas PDF PDF Image

Shear Stress Variation across Neutral Axis for Rectangular Section Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Beam = 3/2*Shear Force on Beam/(Beam Width at Considered Level*Depth of Rectangular Section)
𝜏 = 3/2*V/(b*d)
This formula uses 4 Variables

Variables Used

Shear Stress in Beam - (Measured in Pascal) - Shear stress in beam is the internal stress that arises from the application of shear force and acts parallel to the cross-section of the beam.
Shear Force on Beam - (Measured in Newton) - Shear Force on Beam refers to the internal force that acts parallel to the cross-section of the beam is the result of external loads, reactions at supports, and the beam’s own weight.
Beam Width at Considered Level - (Measured in Meter) - Beam width at considered level refers to the width of the beam’s cross-section at the point where shear stress or other forces are being analyzed.
Depth of Rectangular Section - (Measured in Meter) - Depth of rectangular section is the vertical dimension of the cross-section of the beam helps in calculating various stresses and ensuring the structural integrity of the beam.

STEP 1: Convert Input(s) to Base Unit

Shear Force on Beam: 4.8 Kilonewton --> 4800 Newton (Check conversion here)
Beam Width at Considered Level: 95 Millimeter --> 0.095 Meter (Check conversion here)
Depth of Rectangular Section: 285 Millimeter --> 0.285 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

𝜏 = 3/2*V/(b*d) --> 3/2*4800/(0.095*0.285)

Evaluating ... ...

𝜏 = 265927.977839335

STEP 3: Convert Result to Output's Unit

265927.977839335 Pascal -->0.265927977839335 Megapascal (Check conversion here)

FINAL ANSWER

0.265927977839335 ≈ 0.265928 Megapascal <-- Shear Stress in Beam

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Shear Stress In Beam » Shear Stress Distribution for Different Sections » Mechanical » Shear Stress in Rectangular Section » Shear Stress Variation across Neutral Axis for Rectangular Section

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Shear Stress in Rectangular Section Calculators

Shear Stress for Rectangular Section

LaTeX Go Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Depth of Rectangular Section^2/4-Distance from Neutral Axis^2)

Shear Force for Rectangular Section

LaTeX Go Shear Force on Beam = (2*Moment of Inertia of Area of Section*Shear Stress in Beam)/(Depth of Rectangular Section^2/4-Distance from Neutral Axis^2)

Distance of C.G of Area (above Considered Level) from Neutral Axis for Rectangular Section

LaTeX Go Distance to CG of Area from NA = 1/2*(Distance from Neutral Axis+Depth of Rectangular Section/2)

Distance of Considered Level from Neutral Axis for Rectangular Section

LaTeX Go Distance from Neutral Axis = 2*(Distance to CG of Area from NA-Depth of Rectangular Section/4)

Shear Stress Variation across Neutral Axis for Rectangular Section Formula

LaTeX Go

Shear Stress in Beam = 3/2*Shear Force on Beam/(Beam Width at Considered Level*Depth of Rectangular Section)
𝜏 = 3/2*V/(b*d)

In which section maximum shear stress position is not at the neutral axis of section?

Nevertheless, the maximum shear stress does not always occur at the neutral axis. For instance, in the case of a cross section having nonparallel sides, such as a triangular section, the maximum value of Q/b (and thus τxy) occurs at mid height, h/2, while the neutral axis is located at a distance h/3 from the base.

How to Calculate Shear Stress Variation across Neutral Axis for Rectangular Section?

Shear Stress Variation across Neutral Axis for Rectangular Section calculator uses Shear Stress in Beam = 3/2*Shear Force on Beam/(Beam Width at Considered Level*Depth of Rectangular Section) to calculate the Shear Stress in Beam, Shear Stress Variation across Neutral Axis for Rectangular Section formula is defined as a measure of the distribution of shear stress across the neutral axis of a rectangular beam, providing insight into the structural integrity and potential failure points of the beam under various loads. Shear Stress in Beam is denoted by 𝜏 symbol.

How to calculate Shear Stress Variation across Neutral Axis for Rectangular Section using this online calculator? To use this online calculator for Shear Stress Variation across Neutral Axis for Rectangular Section, enter Shear Force on Beam (V), Beam Width at Considered Level (b) & Depth of Rectangular Section (d) and hit the calculate button. Here is how the Shear Stress Variation across Neutral Axis for Rectangular Section calculation can be explained with given input values -> 2.7E-7 = 3/2*4800/(0.095*0.285).

FAQ

What is Shear Stress Variation across Neutral Axis for Rectangular Section?

Shear Stress Variation across Neutral Axis for Rectangular Section formula is defined as a measure of the distribution of shear stress across the neutral axis of a rectangular beam, providing insight into the structural integrity and potential failure points of the beam under various loads and is represented as 𝜏 = 3/2*V/(b*d) or Shear Stress in Beam = 3/2*Shear Force on Beam/(Beam Width at Considered Level*Depth of Rectangular Section). Shear Force on Beam refers to the internal force that acts parallel to the cross-section of the beam is the result of external loads, reactions at supports, and the beam’s own weight, Beam width at considered level refers to the width of the beam’s cross-section at the point where shear stress or other forces are being analyzed & Depth of rectangular section is the vertical dimension of the cross-section of the beam helps in calculating various stresses and ensuring the structural integrity of the beam.

How to calculate Shear Stress Variation across Neutral Axis for Rectangular Section?

Shear Stress Variation across Neutral Axis for Rectangular Section formula is defined as a measure of the distribution of shear stress across the neutral axis of a rectangular beam, providing insight into the structural integrity and potential failure points of the beam under various loads is calculated using Shear Stress in Beam = 3/2*Shear Force on Beam/(Beam Width at Considered Level*Depth of Rectangular Section). To calculate Shear Stress Variation across Neutral Axis for Rectangular Section, you need Shear Force on Beam (V), Beam Width at Considered Level (b) & Depth of Rectangular Section (d). With our tool, you need to enter the respective value for Shear Force on Beam, Beam Width at Considered Level & Depth of Rectangular Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shear Stress in Beam?

In this formula, Shear Stress in Beam uses Shear Force on Beam, Beam Width at Considered Level & Depth of Rectangular Section. We can use 1 other way(s) to calculate the same, which is/are as follows -

Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Depth of Rectangular Section^2/4-Distance from Neutral Axis^2)

Home

FREE PDFs

🔍 Search