Shear Stress in Flange of I-section Calculator

✖Shear Force on Beam is the force which causes shear deformation to occur in the shear plane.ⓘ Shear Force on Beam [F_s]			+10% -10%
✖Moment of Inertia of Area of Section is the second moment of the area of the section about the neutral axis.ⓘ Moment of Inertia of Area of Section [I]			+10% -10%
✖The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section.ⓘ Outer Depth of I section [D]			+10% -10%
✖Distance from Neutral Axis is the distance of the considered layer from the neutral layer.ⓘ Distance from Neutral Axis [y]			+10% -10%

✖Shear Stress in Beam is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Flange of I-section [𝜏_beam]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Shear Stress in I Section Formulas PDF PDF Image

Shear Stress in Flange of I-section Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Outer Depth of I section^2/2-Distance from Neutral Axis^2)
𝜏_beam = F_s/(2*I)*(D^2/2-y^2)
This formula uses 5 Variables

Variables Used

Shear Stress in Beam - (Measured in Pascal) - Shear Stress in Beam is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.
Shear Force on Beam - (Measured in Newton) - Shear Force on Beam is the force which causes shear deformation to occur in the shear plane.
Moment of Inertia of Area of Section - (Measured in Meter⁴) - Moment of Inertia of Area of Section is the second moment of the area of the section about the neutral axis.
Outer Depth of I section - (Measured in Meter) - The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section.
Distance from Neutral Axis - (Measured in Meter) - Distance from Neutral Axis is the distance of the considered layer from the neutral layer.

STEP 1: Convert Input(s) to Base Unit

Shear Force on Beam: 4.8 Kilonewton --> 4800 Newton (Check conversion here)
Moment of Inertia of Area of Section: 0.00168 Meter⁴ --> 0.00168 Meter⁴ No Conversion Required
Outer Depth of I section: 9000 Millimeter --> 9 Meter (Check conversion here)
Distance from Neutral Axis: 5 Millimeter --> 0.005 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

𝜏_beam = F_s/(2*I)*(D^2/2-y^2) --> 4800/(2*0.00168)*(9^2/2-0.005^2)

Evaluating ... ...

𝜏_beam = 57857107.1428571

STEP 3: Convert Result to Output's Unit

57857107.1428571 Pascal -->57.8571071428571 Megapascal (Check conversion here)

FINAL ANSWER

57.8571071428571 ≈ 57.85711 Megapascal <-- Shear Stress in Beam

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Shear Stress In Beam » Shear Stress Distribution for Different Sections » Shear Stress in I Section » Mechanical » Shear Stress Distribution in Flange » Shear Stress in Flange of I-section

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Shear Stress Distribution in Flange Calculators

Inner Depth of I-section given Shear Stress in Lower Edge of Flange

LaTeX Go Inner Depth of I Section = sqrt(Outer Depth of I section^2-(8*Moment of Inertia of Area of Section)/Shear Force on Beam*Shear Stress in Beam)

Outer Depth of I section given Shear Stress in Lower Edge of Flange

LaTeX Go Outer Depth of I section = sqrt((8*Moment of Inertia of Area of Section)/Shear Force on Beam*Shear Stress in Beam+Inner Depth of I Section^2)

Moment of Inertia of I section given Shear Stress in Lower Edge of Flange

LaTeX Go Moment of Inertia of Area of Section = Shear Force on Beam/(8*Shear Stress in Beam)*(Outer Depth of I section^2-Inner Depth of I Section^2)

Shear Force in Lower Edge of Flange in I-section

LaTeX Go Shear Force on Beam = (8*Moment of Inertia of Area of Section*Shear Stress in Beam)/(Outer Depth of I section^2-Inner Depth of I Section^2)

Shear Stress in Flange of I-section Formula

LaTeX Go

Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Outer Depth of I section^2/2-Distance from Neutral Axis^2)
𝜏_beam = F_s/(2*I)*(D^2/2-y^2)

Where is Shear Stress Distribution in a Beam Section Maximum?

The maximum shear stress occurs at the neutral axis and is zero at both the top and bottom surface of the beam. Shear flow has the units of force per unit distance.

How to Calculate Shear Stress in Flange of I-section?

Shear Stress in Flange of I-section calculator uses Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Outer Depth of I section^2/2-Distance from Neutral Axis^2) to calculate the Shear Stress in Beam, The Shear Stress in Flange of I-section formula is defined as a measure of the stress that occurs in the flanges of an I-section beam when an external force is applied, causing deformation and stress concentration in the beam. Shear Stress in Beam is denoted by 𝜏_beam symbol.

How to calculate Shear Stress in Flange of I-section using this online calculator? To use this online calculator for Shear Stress in Flange of I-section, enter Shear Force on Beam (F_s), Moment of Inertia of Area of Section (I), Outer Depth of I section (D) & Distance from Neutral Axis (y) and hit the calculate button. Here is how the Shear Stress in Flange of I-section calculation can be explained with given input values -> 5.8E-5 = 4800/(2*0.00168)*(9^2/2-0.005^2).

FAQ

What is Shear Stress in Flange of I-section?

The Shear Stress in Flange of I-section formula is defined as a measure of the stress that occurs in the flanges of an I-section beam when an external force is applied, causing deformation and stress concentration in the beam and is represented as 𝜏_beam = F_s/(2*I)*(D^2/2-y^2) or Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Outer Depth of I section^2/2-Distance from Neutral Axis^2). Shear Force on Beam is the force which causes shear deformation to occur in the shear plane, Moment of Inertia of Area of Section is the second moment of the area of the section about the neutral axis, The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section & Distance from Neutral Axis is the distance of the considered layer from the neutral layer.

How to calculate Shear Stress in Flange of I-section?

The Shear Stress in Flange of I-section formula is defined as a measure of the stress that occurs in the flanges of an I-section beam when an external force is applied, causing deformation and stress concentration in the beam is calculated using Shear Stress in Beam = Shear Force on Beam/(2*Moment of Inertia of Area of Section)*(Outer Depth of I section^2/2-Distance from Neutral Axis^2). To calculate Shear Stress in Flange of I-section, you need Shear Force on Beam (F_s), Moment of Inertia of Area of Section (I), Outer Depth of I section (D) & Distance from Neutral Axis (y). With our tool, you need to enter the respective value for Shear Force on Beam, Moment of Inertia of Area of Section, Outer Depth of I section & Distance from Neutral Axis and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Shear Stress in Beam?

In this formula, Shear Stress in Beam uses Shear Force on Beam, Moment of Inertia of Area of Section, Outer Depth of I section & Distance from Neutral Axis. We can use 1 other way(s) to calculate the same, which is/are as follows -

Shear Stress in Beam = Shear Force on Beam/(8*Moment of Inertia of Area of Section)*(Outer Depth of I section^2-Inner Depth of I Section^2)

Home

FREE PDFs

🔍 Search