Shear Strength of Softer Metal given Frictional force Calculator

✖Force of Friction used in merchant circle where the friction force is equal to the product of coefficient of friction and normal force.ⓘ Force of Friction [F_f]			+10% -10%
✖Real Area of Contact is defined as the actual or real area that is in actual contact with the other part.ⓘ Real Area of Contact [A_c]			+10% -10%
✖Proportion of Area of Metallic Contact is defined as the proportion of the area supporting the load in which metal came in contact.ⓘ Proportion of Area of Metallic Contact [γ_m]			+10% -10%
✖Shear Strength of Softer Lubricant Layer refers to the maximum stress that the lubricant material can withstand before it undergoes shear deformation.ⓘ Shear Strength of Softer Lubricant Layer [τ₂]			+10% -10%

✖Shear Strength of Softer Metal refers to the maximum stress that the metal can withstand when subjected to a shear force before it starts to deform or fail.ⓘ Shear Strength of Softer Metal given Frictional force [τ₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Cutting Force and Surface Roughness Formulas PDF PDF Image

Shear Strength of Softer Metal given Frictional force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Strength of Softer Metal = ((Force of Friction/Real Area of Contact)-(1-Proportion of Area of Metallic Contact)*Shear Strength of Softer Lubricant Layer)/Proportion of Area of Metallic Contact
τ₁ = ((F_f/A_c)-(1-γ_m)*τ₂)/γ_m
This formula uses 5 Variables

Variables Used

Shear Strength of Softer Metal - (Measured in Pascal) - Shear Strength of Softer Metal refers to the maximum stress that the metal can withstand when subjected to a shear force before it starts to deform or fail.
Force of Friction - (Measured in Newton) - Force of Friction used in merchant circle where the friction force is equal to the product of coefficient of friction and normal force.
Real Area of Contact - (Measured in Square Meter) - Real Area of Contact is defined as the actual or real area that is in actual contact with the other part.
Proportion of Area of Metallic Contact - Proportion of Area of Metallic Contact is defined as the proportion of the area supporting the load in which metal came in contact.
Shear Strength of Softer Lubricant Layer - (Measured in Pascal) - Shear Strength of Softer Lubricant Layer refers to the maximum stress that the lubricant material can withstand before it undergoes shear deformation.

STEP 1: Convert Input(s) to Base Unit

Force of Friction: 25 Newton --> 25 Newton No Conversion Required
Real Area of Contact: 1250 Square Millimeter --> 0.00125 Square Meter (Check conversion here)
Proportion of Area of Metallic Contact: 0.5 --> No Conversion Required
Shear Strength of Softer Lubricant Layer: 0.01 Newton per Square Millimeter --> 10000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

τ₁ = ((F_f/A_c)-(1-γ_m)*τ₂)/γ_m --> ((25/0.00125)-(1-0.5)*10000)/0.5

Evaluating ... ...

τ₁ = 30000

STEP 3: Convert Result to Output's Unit

30000 Pascal -->0.03 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

0.03 Newton per Square Millimeter <-- Shear Strength of Softer Metal

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Metal Machining Dynamics » Cutting Force and Surface Roughness » Shear Strength of Softer Metal given Frictional force

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Cutting Force and Surface Roughness Calculators

Cutting Force given Specific Cutting Energy in Machining

LaTeX Go Cutting Force = Specific Cutting Energy in Machining*Cross Sectional Area of Uncut Chip

Cutting Force given Rate of Energy Consumption during Machining

LaTeX Go Cutting Force = Rate of Energy Consumption during Machining/Cutting Speed

Resultant Cutting Force using Force required to remove Chip

LaTeX Go Resultant Cutting Force = Force required to Remove Chip+Plowing Force

Force required to remove Chip and Acting on Tool Face

LaTeX Go Force required to Remove Chip = Resultant Cutting Force-Plowing Force

Shear Strength of Softer Metal given Frictional force Formula

LaTeX Go

What are disadvantages of friction?

Disadvantages of friction:
It always resists the motion, so extra energy is required to overcome it.
It causes wear and tear of machines.
It decreases the life expectancy of moving parts of vehicles.
Since friction is very useful in some cases while harmful in some cases, friction is called a necessary evil.

How to Calculate Shear Strength of Softer Metal given Frictional force?

Shear Strength of Softer Metal given Frictional force calculator uses Shear Strength of Softer Metal = ((Force of Friction/Real Area of Contact)-(1-Proportion of Area of Metallic Contact)*Shear Strength of Softer Lubricant Layer)/Proportion of Area of Metallic Contact to calculate the Shear Strength of Softer Metal, The Shear Strength of Softer Metal given Frictional force is defined as the shear strength of the softer metal which is used in machining. Shear Strength of Softer Metal is denoted by τ₁ symbol.

How to calculate Shear Strength of Softer Metal given Frictional force using this online calculator? To use this online calculator for Shear Strength of Softer Metal given Frictional force, enter Force of Friction (F_f), Real Area of Contact (A_c), Proportion of Area of Metallic Contact (γ_m) & Shear Strength of Softer Lubricant Layer (τ₂) and hit the calculate button. Here is how the Shear Strength of Softer Metal given Frictional force calculation can be explained with given input values -> 3E-8 = ((25/0.00125)-(1-0.5)*10000)/0.5.

FAQ

What is Shear Strength of Softer Metal given Frictional force?

The Shear Strength of Softer Metal given Frictional force is defined as the shear strength of the softer metal which is used in machining and is represented as τ₁ = ((F_f/A_c)-(1-γ_m)*τ₂)/γ_m or Shear Strength of Softer Metal = ((Force of Friction/Real Area of Contact)-(1-Proportion of Area of Metallic Contact)*Shear Strength of Softer Lubricant Layer)/Proportion of Area of Metallic Contact. Force of Friction used in merchant circle where the friction force is equal to the product of coefficient of friction and normal force, Real Area of Contact is defined as the actual or real area that is in actual contact with the other part, Proportion of Area of Metallic Contact is defined as the proportion of the area supporting the load in which metal came in contact & Shear Strength of Softer Lubricant Layer refers to the maximum stress that the lubricant material can withstand before it undergoes shear deformation.

How to calculate Shear Strength of Softer Metal given Frictional force?

The Shear Strength of Softer Metal given Frictional force is defined as the shear strength of the softer metal which is used in machining is calculated using Shear Strength of Softer Metal = ((Force of Friction/Real Area of Contact)-(1-Proportion of Area of Metallic Contact)*Shear Strength of Softer Lubricant Layer)/Proportion of Area of Metallic Contact. To calculate Shear Strength of Softer Metal given Frictional force, you need Force of Friction (F_f), Real Area of Contact (A_c), Proportion of Area of Metallic Contact (γ_m) & Shear Strength of Softer Lubricant Layer (τ₂). With our tool, you need to enter the respective value for Force of Friction, Real Area of Contact, Proportion of Area of Metallic Contact & Shear Strength of Softer Lubricant Layer and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search